How do you control lights in Home Assistant? :)

@CrypticConsole

3 жыл бұрын

I plan to 3D print A cover for the switch and install a tadfri dimmer on top of that

Great video, thanks.

@SmartHomeMakers

3 жыл бұрын

Thanks Ron!

Nice video , great overview of options!

@SmartHomeMakers

3 жыл бұрын

Hi BeardedTinker :) Glad it was helpful!

Enjoyed that thanks 😀👍. Looking forward to the next tutorial, hoping it’s going to help me with a going to bed routine. I would like to be able to say to Alexa, “going to bed” and 5 mins later all lights go off and lights only go to 10% brightness if triggered until a set time in morning. (Hint hint 🤞😀🤞) Cheers

@SmartHomeMakers

3 жыл бұрын

Thanks for the suggestion! Happy to point you in the right direction, sounds like a good automation to have :)

I am looking for a smart wall switch with the ability to control voltage for dimming in Home Assistant. are there any products for that ?

Hi, i have installed phillips hue into my home assistant using a hue bridge, all works well but the hue smart button just has a battery entity so not sure how to use this as a trigger

The problem I have is that there is no space for two sonoff minis in one EU electrical box. so "two gang" lights are a problem here. Also my two cents, The best setup (in my opinion) for retrofitting a house is to use relay switches combined with Zigbee bulbs. (Zigbee bulbs connect faster from cold state (no power) and meshing is usefull. - Obviously it's expensive and requires electrical work. + good aesthetics with the same interaction has before. + individual brightness control + local control even in the event that wifi and zigbee go down. + if a bulb fails any house member can swap the bulb for a normal one.

Lmao at 3:19 my Siri responded to that multiple times 😂😂😂

@SmartHomeMakers

2 жыл бұрын

Ops!

a smart switch is the way to go in my opinion. Not only can you control the light when the wifi or homeassistant is not running. But you can also configure the touch buttons to do other things with a long press. I got a sonoff touch and i'm using it esphome. a long press toggles my ledstrips under my desk.

@SmartHomeMakers

3 жыл бұрын

The long press is a good idea!

Is it possible to control a hue lamp through homeassistant from a knx switch? (knx light switch - homeassistant - hue bridge - hue lamp)

@SmartHomeMakers

3 жыл бұрын

Hi Pascal! If the hue lamp has power it will work, you also have a knx integration in home assistant: www.home-assistant.io/integrations/knx/

I use a tasmotised sonoff mini. But instead of powering the relay on and off by flipping the light switch. I toggle the state of my smart hue light using a home assistant automation triggered by the state change of the physical light switch connected to the mini. That way I have a cheap WiFi light switch that is able to control smart lights without the hassle of changing batteries every month.

@SmartHomeMakers

3 жыл бұрын

That is cool! How many sonoff mini do you have ? Found any limitations or interference ?

@Jannick-mp7bf

3 жыл бұрын

I currently have two of them installed. I didn’t experience any interfence with the hue lights and the sonoff mini (WiFi version btw). The only trouble I had was with my automation. When the sonoff mini went to unavailable my light unintentionally changed state. But this was simply fixed by a not condition.

Good video! I have a doubt. I want change the logic of my switch. My switch is connect to a relay input and activates a fan. When it is ON, my fan is OFF. When the switch is OFF, my fan is ON. How I could to change this logic? Thanks

@SmartHomeMakers

3 жыл бұрын

Potentially swap the wires ? Is just in home assistant or also on the physical device ?

@imdhemant

3 жыл бұрын

Invert_logic : true

i have a very old lrge house so need to extend zigbee signal so bought 4 lidl hubs but cannot work out how to install all of them but you have philips and lidl how have you done that?

@SmartHomeMakers

2 жыл бұрын

I don't use lidl hubs or Philips hubs as Zigbee extenders, many Zigbee device act like a mesh network, you only need one hub (I have a conbee II stick)

Is diy smart switch using esphome a good idea?

@SmartHomeMakers

2 жыл бұрын

Personally not a fan of DIY just because I don't have the time and don't want to mess with it doesn't mean it could be valid

how to make home assistant controll what the buttons on phillips hue does?

@SmartHomeMakers

2 жыл бұрын

Hello, you can use the device trigger events in your automations!

@norkris8729

2 жыл бұрын

@@SmartHomeMakers hue dimmer switch 2 is not showing up

I dont have the integration panel in my Home Assidtant?? Perhaps this video is now obsolete??

@SmartHomeMakers

5 ай бұрын

Moved down to settings :)

I'm confused why does both switch and relay require electrical work? Isn't one supposed to basically be a portable remote control that you stick on you're wall?

@SmartHomeMakers

2 жыл бұрын

They Shelly 1 relay needs to be powered with the mains! Hope this helps!

I wish I had a friend who new all this I’d pay to get it setup for my apartment dead ass

If I have a zigbee light bulb on the same circuit as a normal dumb gang switch, but I want to replace the gang to a smart gang to either send zigbee or wifi signal to homeassistant, which gang do I need?

@SmartHomeMakers

3 жыл бұрын

Hi PurplePois0n, you can mix & match, you can have a Zigbee bulb and a Wi-Fi switch for example, was that your question? I use a Sonoff switch with Lifx bulb in one room, but I could swap it out with a Zigbee bulb if I wanted!

@purplepois0nbf

3 жыл бұрын

@smart home makers Thanks for the reply! does this mean the live wires coming out of the gang is always on then?

@CrypticConsole

3 жыл бұрын

@@purplepois0nbf by having a Shelly or a similar device inside the wall you can wire the neural and live wires together, meaning the light is always on

@purplepois0nbf

3 жыл бұрын

@@CrypticConsole okay thanks! instead of a Shelly can use the same one as in the video then? I'm just bit confused sorry

@CrypticConsole

3 жыл бұрын

@@purplepois0nbf you should be able to, I only mentioned shelly as I extensively researched there products while looking for my smart home equipment.

Hard pressing?

@SmartHomeMakers

3 жыл бұрын

Long press:)

Shelly l1 no neutral and there dimmer but as you said no color

@SmartHomeMakers

2 жыл бұрын

Is it working quite well for you ?

Don't forget the WAF (Wife Approval Factor)... replacing bulbs with Zigbee- or WiFi bulbs can become annoying, especially when the wife turns the light (and thus the Zigbee- or WiFi bulb) off using the wall switch. Shelly 1L doesn't need a neutral wire anymore if he load exceeds 20 watt, if the load doesn't exceed 20 watt you can install a resistor. This way the wife can control the lights the way she wants (my wife 10 out of 10 times using the wall switch) and us tech savvy guys can control the lights using app/home assistant/domoticz.

@SmartHomeMakers

3 жыл бұрын

100 % Agree! I also in the past had a lot of guests around and my smart lights would never work. What do you use in your home ? :)

@chrisketting7065

3 жыл бұрын

@@SmartHomeMakers Shelly and Sonoff smart switches or dimmers. Brand depends on the use case 🤙🏻