Thanks man for posting this…I have a Ford focus se 2014 and this process fixed my transmission issue so far! I will try to drive it later again to see if it comes back or not! Will keep you posted

@JOATD

6 ай бұрын

Thank you we'll be waiting, I'm glad my video could help you

@baraleuzy

6 ай бұрын

@@JOATD hey mate, my problem is back while driving yesterday…I drove wrongly because I’ve gun it and since then the problem is back. I followed this process once more but the problem is still there. I’ll try again tomorrow to see how it goes

This worked on my car. I drove for 12 mile when I got home I turned off and on I saw there was no check engine light. Thank you for sharing this.

@JOATD

11 ай бұрын

No problem I'm glad that my video helped you

Omg this is my issue right now and cant afford a new car. Thank you so much for this i will definitely try.

@JOATD

Жыл бұрын

No problem I hope this works out for you

any idea how to get the backup sensor to make noise when backing up?

Thank you! I will try this on my hard starting ford focus hatchback 2.0 2006, got a problem on PCM, every time i started it the power(RPM) drop. I need to restarted it to about 3 to 4 times.

Thank you for the education.

@JOATD

Жыл бұрын

No problem, I hope that it can help you with your problem.

PLEASE HELP 🙏!!!!! i dont got no lights on the dash but im still getting a p06b8 code and i been doing some research and its saying it may be the pcm but i kinda still want to get it fixed or checked just to be safe before i proceed with the replacement and repair for it

I’m so broke I can’t pay attention but otherwise I’d donate to this channel. Your audio and video quality is phenomenal your voice isn’t annoying or difficult to understand (like the Russian dude) and instructions are clear concise

@JOATD

Жыл бұрын

Lol, Thank you for the positive compliment, I'm glad that my video could help you. And I will keep up the good work

Good job, that will help a lot

@JOATD

7 ай бұрын

No problem I'm glad that my video could help

Same issue as mine, is not a big deal even if you have to replace the forks inside the transmission,is really easy.

@JOATD

Жыл бұрын

I'm glad that my video could help please check out the description area for the special tool that I used.

Thank you

@JOATD

Жыл бұрын

No problem I'm glad my video could help you with your problem

Could you use jumper cables to attach if you do not have alligator clips or wire?

@JOATD

2 жыл бұрын

Yes technically you can use anything you want as long as it makes a good connection

@chrisdize5109

2 жыл бұрын

@@JOATD The Check engine light went off by just turning the key to the on position for 10 seconds. However the "i" is still on and I still get a transmission error when i turn the car on. does that go away after driving it?

@praveenkumarsaragadam4534

Жыл бұрын

@@chrisdize5109 hey is your issue solved ? I am curious what have you done to fix the "I" error ?

@alfredough

Ай бұрын

You could just take them both apart and touch them together too just make sure it’s all unplugged from the batteey

Take both termals off and jumper cables to each end of terminals let sit to clear the computers and compassoters for 20 minutes put hot wire on first then ground back on to battery then turn key on dont start for 1 min. Then start it let idle till fully warmed up so the throttle sets its low and high then go driving normal driving above 35 mph for more than 25 miles . And need to replace the acuators are bad brand new when first built . Recall on them there your shifting motors .

What if it kicks this code but it won't start after you reset

that does not damage the ECU? positive or negative terminal that you used?

@JOATD

10 ай бұрын

No, just resets it

Bonjour je ne parvient pas à supprimer l'anti démarrage ford focus

What about the other warning lights?? Are they supposed to go out too?

@deeblue984

2 жыл бұрын

This didn't work for my 13 ford flex

Hi! Does the car still works ok after 4 months?

@JOATD

Жыл бұрын

Yes it works perfectly fine haven't had a problem yet

@JOATD

Жыл бұрын

@@bojanmahic2858 yes it is still running perfectly fine

does anyone know if this also works on the ford focus mk4 ?

@JOATD

Жыл бұрын

As long as it's a Ford Focus around the same year it should work.

I have a code P0902 clutch actuator circuit low and I replace both actuators but it still shifting problems and jerks and still read code P0902

@johnsimon7867

Ай бұрын

I have the same issue

@jasonsawyer8048

12 күн бұрын

Most likely a TCM issue, pretty common!

Would u suggest fixing the actuator under the car before trying this. Right now my car wont go in reverse and im hopin its something this simple. Mine was revving up but no power then when i got ot home it wouldn't go in reverse plz help i camt afford a new transmission

@JOATD

11 ай бұрын

Yes this video will not help if the car will not go in reverse. This is for more if you getting a shuttering feeling. Try this video. kzread.info/dash/bejne/pK58qM9vl5Wdes4.html

@jennifervaldez7139

11 ай бұрын

@@JOATD I have watched this video as well and my friend he changed the one under the car but he got it from a junkyard so do u think it's best to get a new one. I also think it may be the TCM but I don't know. Do u know if I change the actuators could I reset the TCM. Is that at all possible

@JOATD

11 ай бұрын

@@jennifervaldez7139 did you try the procedure first to see if you could unstick the fork. Installing a new actuator doesn't unstick the fort.

@jennifervaldez7139

11 ай бұрын

@@JOATD I don't know if he did it exactly like the video but he did something I'll have to show him your video. We want to try cleaning the ground wires as well. I will try everything short of buying a transmission right now. Lol. They are so expensive

@kennyhonn2339

10 ай бұрын

@@jennifervaldez7139 your tcm is probably the main corporate. I just received my back from the shop today with a new tcm and I now have reverse and it doesn’t shift hard anymore. Ford has a customer service bulletin out about the tcm. They extended the warranty on the part to 10 years/150,000 miles. Good luck and I hope this helps

what do you mean by you turned off the check engine light?

@JOATD

Жыл бұрын

I used a OBD2 tool that resets the engine light. And the engine light never turned back on.

@JOATD

Жыл бұрын

This is the tool that I used to reset the light. kzread.info/dash/bejne/qGlmtJepnre7hJc.html

Does your temperature always shows halfway

@JOATD

Жыл бұрын

Yes it shows halfway unless you're overheating

Will it pass smog ?

@JOATD

2 жыл бұрын

Yes as long as you turn the engine light off

How many miles did u drive? usually mine I drove at least 50 miles at least to reprogram ur ecm.

@JOATD

2 жыл бұрын

About 150 but it could have reprogrammed it earlier than that because after I reset it I never had any problems

Funciona para un focus 2006 ?

@JOATD

Жыл бұрын

2013

@EveFrag

3 ай бұрын

@@JOATD so he ask if this works on a 06 focous and I'm hopeing u understood that if this was a a 06 im only askn cuz I was wonder that 2 but my bad if u know what he said sir thx

@JOATD

3 ай бұрын

@EveFrag oh okay, no this only works on a 2012-2018 Ford Focus

Will this get the charging system light off

@JOATD

Жыл бұрын

Are you referring to the battery warning light

@JOATD

Жыл бұрын

If so then no this does not turn off the battery warning light code. This will not turn off the engine light either you will have to use a scan tool to turn off the engine light.

Ford focus, really easy to fix, if you know how to do the job, and very economic is like fixing a toy

Man just got a 2012 I think the company we got it from cleared the code po805 came up on my reader it shudders when shifting and I don’t know what to do !!?

@randykirkpatrick3593

Жыл бұрын

The shutter is due to ford trying something that has never been tested on vehicles the feista and focus from 2009/current are all double clutch meaning the tcm has two clutch’s reset all the program codes and fix the problem when it comes up

@anthonymiliaresis627

Жыл бұрын

@@randykirkpatrick3593 I got in it today and the check engine light was off and it started shifting fine today I contacted ford and they said they will get back to me about a buy back or a extended warranty but it’s a 2012 with a 100,000 miles do you think they will take care of it ?

@randykirkpatrick3593

Жыл бұрын

Most fix is a simple tcm reprogramming

@anthonymiliaresis627

Жыл бұрын

@@randykirkpatrick3593 hey thank you man I liked your video too it was very helpful . How many miles you Got on yours is it a good car you think ?

@randykirkpatrick3593

Жыл бұрын

Mine only has 107k on it

And what about radio code, I don't have it and I am afraid to unplug the battery.

@JOATD

Жыл бұрын

It depends on the year of your Ford Focus if you have the same one I do you won't have that problem. If you have an older year Focus the password for your Focus Radio should be in the dashboard with the manual it should look like a little credit card that sets for it on it

@JOATD

Жыл бұрын

Sorry looks like a little credit card that says Ford on it

@smislye

Жыл бұрын

@@JOATD Thank you for answer, it is 2015 and there is no any card. May be I lost it or did not get it.

The computers will do its relearning on its own

Try a different remedy and that one worked for a few miles just gonna try yours and see if not just going to wait 3 to4 months for ford

@JOATD

Жыл бұрын

Do you mind sharing the remedy that you tried.

@JOATD

Жыл бұрын

I hope that my video can help you if you decide to try.

So just connect the dsconnected positive lead to earth....

@JOATD

Жыл бұрын

Correct that's all you have to do

It has non volatile memory, the only way to reset the adaptive learning memory Is with a programmer.

@JOATD

Жыл бұрын

Okay if that's true explain to me why my engine light has not came back on. There's always two ways to fix something you don't always have to use a programmer. But I do understand it would be the right way to do it

Why didn't you cleared the code out then you know and what did you say you were supposed to drive for just a normal drive it didn't look like if it was a normal drive

@JOATD

Жыл бұрын

Lol, it was a normal Drive I just sped the video up so it wouldn't be so long. And at the end of the video I cleared the code out.

check engine light still on

@JOATD

2 жыл бұрын

Are you talking about your check engine light or mine. Later on in the video I turn the check engine light off and it has not turned back on yet.

@AdewaleOladipupo

6 ай бұрын

I’m just curious. You said you turned your check engine light off. I thought it should go off after the reset by itself. If you turned it off, how did you do it

Why not just do this with a jump cable ?

@JOATD

Жыл бұрын

You can use whatever wire you like I just chose to use that because it was easier to handle or work with.

The ratchet tho

@JOATD

9 ай бұрын

I don't think you can buy the wrenches anymore. I will try to find.

@JOATD

9 ай бұрын

Okay I found them all you have to do is go in the descriptions I put the links in there.

Yeah it’s a ford transmission the car needs a new one & your wire thing didn’t do anything, the CEL was still on, you need a good scanner to reset that ECU. Waste of time bruh

@JOATD

Жыл бұрын

I'm sorry that this trick did not work for you but it did work for me and all I had to do was turn off the engine light afterwards and it never came back on and I never had the issue again.

@JOATD

Жыл бұрын

Sometimes you get a similar issue but not the same thing is causing the problem.

Very bad manufacturing car