Amazon links to relevant products (from the description): * Replacement MAF sensor ~ US: amzn.to/2qlIoAO | UK: amzn.to/2qVeLsz * T20 security torx drive bit ~ US: amzn.to/2qlNCML | UK: amzn.to/2rWBiDP * MAF cleaner spray ~ US: amzn.to/2r1KpmU | UK: amzn.to/2r20itg * OBD2 scan tool ~ Amazon US: amzn.to/2cgqSbU | UK: amzn.to/2cd2Jm0

Very helping video I will replace my sensor next week 😊😊😊

Few years ago my Wife's Fiesta was playing up....running very badly and just doing this solved it. Always worth cleaning during servicing. Great vid as usual.

Excellent. Got to be one of the best instructional videos 😉

Very educational. I couldn't hear if "math, map, MAF, or mass" lol

@pressplay1703

3 жыл бұрын

MAF Mass air flow.

I like your form to teach, its really useful thanks.

Thank you, excellent and helpful video.‎

brilliant description. ThankYou. Stephen australia

Thanks for video.

Thanks bro very nice and clear...A++++

Can you tell where the interior climate control senzor is on this car, please

What would you say could be the issue if it sticks at 2000 rpm and my temperature gauge has stopped working as well was thinking throttle body cencor

Can this cause your engine to rev up on its own.

Thank you so much for your helpful videos. I’ve seen most of them and I really appreciate them. Could you please tell me where I can locate the maf sensor on ford Mondeo mk3 1.8 petrol as I am struggling to find it. I doubt actually that mine has one. Thank you in advance Craig.

@CraigsDIY

5 жыл бұрын

No MAF sensor on the Duratec HE. There is a T-MAP sensor, lower front of intake manifold, I have another video on it.

Tenho Focus sedam 2004 2.0 esse sensor e o sensor MAF. Ele não tem o MAP ou são o mesmo?

Hi Craig. I have a 2008 MK 2 Ford Focus hatchback 1.6tdi. It is on a french plate as I live in France. The car we bought has been nothing but trouble, it has had a new turbo core, a mixture valve ( that sites behind the encased diesel filter) and lots of other things. We have to keep the car because we have spent so much on it. (better the devil you know).ok so now I have an orange engine warning lights again, the turbo stops working and has reduced power, and the warning says the engine malfunction ( french Engine Default ). I have just removed the air filter system to gain access to the air flow sensor. That does not seem to be too bad a condition, though the box holding the filter was pretty dirty. We took it to this mechanic who ran a diagnostic and told us it was a sensor on the other side of the engine it sits in a square housing ( tube system that seems to be the intake / outlet pipe. He gave us the part number from HELLA car parts. That Nummer he gave us was 6app 009400521. I do not see where that part fits, can you help me out, please?. The warning alarm continues constantly to go off and it's driving me crazy. The French, all they want is money and don't do any work if you could lead us to that part from a UK dealer that would be really nice of you and maybe some help on accessing the area I need to fit the part.I don't even know if it is that part.I wish I had an old mk 3 escort or something , becase these cars now days , nothing but trouble.Thanks Craig.

@CraigsDIY

6 жыл бұрын

I can't help you with diesels sorry I just have no experience. That Hella part # seems to be a boost pressure sensor for your turbo system - but for a Citroen not Ford (possibly it's generic). You need to get the code(s) off the car's ECU with a scan tool and see for yourself what's causing the engine light. Although, replacing the referenced part doesn't guarantee a fix of course as you need to know why it's a problem. If the sensor has actually failed and is either dead (after checking its wiring) or isn't giving a sensible readout even after cleaning, then I guess replace and clean entire air intake upstream, replace air filter, and go from there. If it's oily then you need to check PCV system as well (valve & integrity of vacuum hoses). If you get stuck in France maybe hold your nose and try a Ford dealership with a decent workshop attached, not cheap but at least they should have techs familiar with the car and easy access to the right parts. Buy a Citroen next time I guess. Good luck.

@CraigsDIY

6 жыл бұрын

Sorry confirming that is a generic MAP sensor and apparently suits the Ford 1.6 TDCI as well - see Ford #s down the page here - www.vehiclepartsdatabase.com/vehicles/allprivateroadvehicles/ford/cmax/16tdci/g8dd/26524/airmanifoldpressuremapsensors/hella/6pp009400521

@AndrewMurphy1

3 жыл бұрын

All I am going to say is sell it, get rid of it. Those engines are awful. I blew mine up because of faulty seals on the turbo and injectors.

COMO BAJAR LA APLICACIÓN PARA CHECAR SENSORES

hi thanks for the video , One question what is the "tool" called that you attached the "T20 security torx drive bit too or link to at amazon? Thanks again.

@CraigsDIY

4 жыл бұрын

It's just a ratcheting screwdriver with hex drive bits, it comes with a whole set of different bits. For just this purpose you could buy a simple T20 security torx screwdriver, or a set like mine would be more generally useful. Take your pick amzn.to/2UOr9Ju

Hi there Craig , my focus is 53reg and I’m looking at ur video clip here but my focus don’t seem to have the sensor anywhere there I checked, can that be that it has a map sensor instead I looked everywhere I only could see the map sensor just down at the bottom on the same pipe that u have the. Mass air flow meater thanx

@CraigsDIY

Жыл бұрын

I know the Duratec engines (Focus Mk II+) only have T-MAPS on the intake manifold, check which is your engine.

Hi I have a ford focus 1.8 tdci that drops speed on motorways and I have to restart the ignition is this a air flow problem

@minibasti4471

6 жыл бұрын

Could you solve your problem? Ive git the same issue

@MrRohanThomas

5 жыл бұрын

That sounds annoying and dangerous, might be MAF but I would get that fixed ASAP

@shanepatrick641

5 ай бұрын

Fueling issue I believe

Can i use brake cleaner for this or not

@ronnyatdrik4700

4 жыл бұрын

Lol. No. There's a Air Flow Sensor cleaner cheaper than Brake cleaners. You can also use throttle cleaner.

Yes very good, can we use WD40 spray

@CraigsDIY

Жыл бұрын

No!

@pstasman629

Жыл бұрын

You cannot use the standard WD40 spray, as it leaves residues behind. But you can use the WD40 Specialist, contact cleaner

My air box does not close properly, is that why my car is hesitating when accelerating 1st and 2nd gear.

@CraigsDIY

2 жыл бұрын

Probably not!

Shuld i take off the + of my battery before i do this ?

@CraigsDIY

6 жыл бұрын

You would remove the -ve not +ve, but no it's not necessary, just ensure the ignition is off.

Thank you so much for your helpful videos. I’ve seen most of them and I really appreciate them. Could you please tell me where I can locate the MAF sensor on Ford FOCUS 1.8 petrol , 2007. As I am struggling to find it. I doubt actually that mine has one. Thank you in advance Craig.

@CraigsDIY

4 жыл бұрын

That's a Duratec HE engine, not the Zetec shown here. Search my other videos for Duratec or Mondeo, not a Focus but same engine. There is no MAF sensor, only a T-MAP on the front of the intake manifold. I have a few videos that cover that.