Very clear instructions. worked for me

It worked and it saved 2 full cartridges. Thank you!

@eymtyy

20 күн бұрын

Tips 1 or 2 are successful and effective ?

Thank you for this very clear instruction!!!!!!

Thanks! It worked!

well done, thanks

Thank so much! It worked for me, haven't used my printer in a while, didn't realize the ink dried up, thanks for the help

@eymtyy

20 күн бұрын

Tips 1 or 2 are successful and effective ?

@veronicav2478

20 күн бұрын

@@eymtyy Tip #1

thank you so much!!!! i refilled my cartridges myself i had to run 2 cycles ans it worked!

Thanks bro. This might be a money saver!! I will let you know.

Thank you I will t r y to remove the ink cartridges which I never knew I could remove

you are a legend my man... thank you, thank you, thank you :)

thank you so much.

Thanks for posting this video, it fixed the problem I was having.

@cory4g

Жыл бұрын

Hey Neko do you have the printhead or the cartridge with printheads

@eymtyy

20 күн бұрын

Tips 1 or 2 are successful and effective ?

Thank you!

Thank you thank you thank you!!! 💋💋💋

Essay due at 12:30 , you saved my life

@eymtyy

20 күн бұрын

Tips 1 or 2 are successful and effective ?

Thanks! followed your advice, worked well. Don’t have to buy a new printer ‼️

@CompAndSave

11 ай бұрын

Great to hear!

How do take the part in printer

We have an HP L7680 with just the black not working. The printhead has both yellow & black. The yellow works, not the black. Will these tips work in our case? Could we just run warm water over to clear the clog? The test report says the printhead is still good. Thanks

Hi! Do you know if the head should be removable with the Epson XP-4100?

@CompAndSave

8 ай бұрын

The printhead of Epson XP-4100 is removable. However, we suggest to ask technician to help if needed.

Idk if I didn't watch long enough but will cleaning use a full cartidge?

Can you use regular rubbing alcohol?

@CompAndSave

Жыл бұрын

Yes, you can use the regular rubbing alcohol.

Hello, I have the printhead version, so when I put it in the solution, is the solution suppose to cover the area we pulled the ribbon connections out from, or should we keep that dry?

@CompAndSave

Жыл бұрын

The solution should only cover the nozzles at the printhead (normally at the bottom). The ribbon connection should not be covered in the solution.

is the isopropyl alcohol 70% solution ?

@CompAndSave

11 ай бұрын

Alcohol 70% will do the job.

Can I use soju instead of isopropyl alcohol? As soju is also alcohol?

@CompAndSave

5 ай бұрын

We never tried soju to clean the print head so we are not sure if it will work.

@mei.hogaraka

5 ай бұрын

@@CompAndSave thank you for your reply I will find another way

How to clean the nozzles of a dry printer cartridge in a 3 seconds. You need to immerse the printer cartridge halfway, nozzles down, for 2 - 3 seconds in boiling water, pull it out and wipe it. Let me explain: boiling water will slightly soak the dried paint and the internal pressure will “break through” and wash the nozzles with ink that is inside. True, the cartridge will “lose” some ink. If it still won't print, it means there is no ink in it.

@eymtyy

20 күн бұрын

Is it just hot water without the need for alcohol ?

didnt work bro

would like to use your cartridges but HP printer won't recognize the cartridges unfortunately - your customer service refunded me thank you!

Ｐｒⓞм𝕠𝕤𝐌