I did the same job today with Carb & Choke Cleaner, not much needed, and a toothbrush and it came clean fast.

Thank you for the video and for including your precious pupper in it :)

Much appreciated for the cleaning part! It's actually why I came here lol

You stopped to feed the puppers 💕😂

2:52 RIP headphone users💀

@danhanfiro112

5 жыл бұрын

Terrell Wilson who tf used head phones when they watch these types of videos? Da faqqq

@NurSyuhada-yt7tt

5 жыл бұрын

Terrell Wilson thx man,ur comment really make my day hahahaha

My mechanic took 4 hours doing this? Maybe he just kept spraying. Jeez. Thanks for the video

@paulclement9118

3 жыл бұрын

How much did he charge you for labor?

@Jordan-on5ef

2 жыл бұрын

@@paulclement9118 $1000 probably

@drewskeez1156

Жыл бұрын

some cars are a pain...the 4 hours probably included getting everything out of the way to remove the valve cover in the first place, cleaning it and then hooking everything back up. This video is only one small step of this job. You also have to clean off the head and make sure you have gotten all debris out, etc. I have to take my wiper motor out, cowl, intake, and a couple other things just to access the valve covers. 4 hours for both sides is reasonable but on some cars could be less.

Looks all pretty and whatnot. nicely done.

Interesting tip on how not to stretch the rubber gasket.

@crazysexycool180

8 ай бұрын

Thank you, please like, share, and subscribe, also check out my other channel Salem Taxi on KZread

my sister said u can use dish soap to get the oil off. is that true im really sure it isnt lol

I see doggo I like and comment Thanks for the tips!

I have the same Matco knife. Great video!

@crazysexycool180

6 жыл бұрын

Thanks.

i could just keep spraying it but i dont want to waste all my chemical, proceeds to waste all the chemical

@crazysexycool180

2 жыл бұрын

ikr, funny

You did not show how you wash the degreaser off after you finished brushing it

Sounds like Negan telling me how to clean a valve cover..

@ryanbonnema7454

4 жыл бұрын

Skumstwo I can’t un-hear that now lmfao

@jacobhald1377

4 жыл бұрын

@@ryanbonnema7454 This video just got so much better!

@crazysexycool180

8 ай бұрын

did you learn anything? or are you still lacking knowledge? Is that Negan enough for you? Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on KZread for more material on a different level.

I used to use brake cleaner but I discovered that Dawn dish soap works better on grease.

The guy at parts store said non-chlorinated brake cleaner is more flammable than the chlorinated. Is there any problem using non-chlorinated to clean the valve cover and the mating surfaces?

@zh85

4 жыл бұрын

Chlorine corrodes metal and other parts.

Did you rinse the cleaner off with water? Or dumped and towel dried?

We need to know how the slots is cleaned , type of clothes , and do we need a thread locker like loctite

Cool. Use that to clean inside the intake manifold and on the outside ?

What is the advantage of cleaning this part other than it will look nicer?

Awesome tutorial.. thank you

@niclasbergqvist1737

Жыл бұрын

No. Use little gasoline and a toothbrush and it is spotless cleaned in 3 minutes. Inside out.

WELL DONE 👍 👍

Um.. *SNORT*

Had the same valve cover problem :) not as dirty though

Thank you for your video

I used Purple Power (full strength) along with a stiff bristled drink-ware brush and my valve cover came out almost new looking. It was worse off than yours, more gunk. :(

@crazysexycool180

9 ай бұрын

Thanks for watching , please like, share, and subscribe

i used gas 💀... it worked though

Blessings, John 3:16. Jesus loves you.

whats the best way to clean the plastic Buick V6 engine 3800 valve cover

@matthewgorgoglione5492

5 жыл бұрын

robert sal diesel fuel as plastic valve cover cleaner🔧😎

Carburetor cleaner works much better. It just smashes oil away. Brake cleaner is mostly just degreaser.

@crazysexycool180

3 жыл бұрын

depends on the quality of the product, this brand i used runns circles around carb cleaner, and leaves no residue, try it.

You dont use gasket sealer? And, is silicone sealer OK for hot engines?

@jameshall2017

4 жыл бұрын

honestly you dont always have to use gasket sealer. it is recommended though. I mean if its on an older car then i probably would.

@cvcoco

4 жыл бұрын

@@jameshall2017 Myself I never used gasket sealer. I used good or new gaskets and careful tightening and same with oil pan. But Im referring to older cars. I notice in vids that newer cars all are taking sealer for some reason and thats why i asked.

@jameshall2017

4 жыл бұрын

@@cvcoco I can definitely understand the older ones because more wear and tear and they actually sit on the valve cover, but the more modern cars the gaskets are already made better and are probably pressed down inside the seam like this one is. So I personally dont see any use for gasket sealant on modern cars and trucks

@cvcoco

4 жыл бұрын

@@jameshall2017 ok, fair enough. I thought the use on modern engines was because parts arent made very precisely and need all the help they can get. I have a car you dont know and i see many people using sealant for it. I dont, use a new silicone gasket and only finger tight on the cover bolts. No leaking.

@jameshall2017

4 жыл бұрын

@@cvcoco I kinda wish they made a silicone gasket for my project truck but with it being an 81 ford I dont know if they do or not. That's actual one of the next things I'm gonna do to it after putting a new master cylinder, calipers and pads is clean the valve cover and re replace the gasket. Cant go wrong with new seals. Especially if you can get to them easily

This an sr20 vvti valve cover?

@ND-yp3sk

5 жыл бұрын

says kia hyundai on it

Can you do this with and aluminium valve cover ?thanks

@crazysexycool180

3 жыл бұрын

Yes, absolutely

PRESSURE WASHER MY MAN

@alexdronesandvlogs167

4 жыл бұрын

I use da foam cannon on that bih

@stelly8839

3 жыл бұрын

@@alexdronesandvlogs167 LMAOOAOAOAO

@bikemedia1531

3 жыл бұрын

Wish I'd read this before i bought some small bristle brush and cleaned it with a dremmel lol

Aayeeeee doggggg

Wheres the glue?

Oven cleaner maybe?

Next time use diesel

@crazysexycool180

8 ай бұрын

Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on KZread for more material on a different level.

waste of chem and wire will deform

You are using way to much

@crazysexycool180

9 ай бұрын

Thanks for watching , please like, share, and subscribe

Geeezzz that can is under a lot of pressure