Suggestions: Invest in a cheap electric power washer and reduce the time going to the car wash. Maybe spritz some fogging oil over the internal parts of the engine after washing. Don't use chlorinated brake cleaner if it might come in contact with internal seals; I saw you use non-chlorinated - good choice.
@mattwnovak2 жыл бұрын
Bro how on earth you gonna sit engine heads down on raw concrete?!
@J05hFontenot
Жыл бұрын
I was thinking the same damn thing
@5starace511
Жыл бұрын
I'm still new to driving but is their a problem with resting my engine or engine head on raw concrete?
@J05hFontenot
Жыл бұрын
@@5starace511 it's likely to mar up the mating surfaces, potentially causing leaks once it's put back together. You need to be careful with heads especially, you don't want a weak head gasket
@castleviewcows.4828
Жыл бұрын
There on sheets of wood and going to be rebuilt.
@KidFromQueens
Жыл бұрын
Bruh, I can't stress how LITTLE that matters! As long as u don't drag it on the ground or put weight on top of it, it's FINE!!🤦🏾♂️🤦🏾♂️
@ApprenticeGM Жыл бұрын
To clean anything really dirty the best method is rinse-wash-rinse. The pressure washer is a terrific tool and should be used first, as it will remove water-soluble dirt and clean a lot of non-water-soluble dirt (oils, grease) using micro-abrasion (which is safe on metals and plastics, at least if they are thick enough to withstand the water blast which engines are). Then you can use surfactants / degreasers / chemical cleaners to remove the remaining oil and grime. Soaking works a lot better after the pre-rinse. Then you can come back with the pressure washer and remove the cleaners and dissolved dirt and whatever it has loosened up. Much more efficient and effective. Rinse-wash-rinse!
@Pk3_Garage
8 ай бұрын
Can't use a pressure washer during the winter.
@tyriqueross4018
7 ай бұрын
@@Pk3_GarageI’m trying to figure out how to degrease my parts in winter as well, have you figured something out?
@Adder-zo4fy4 ай бұрын
Thank you for showing "La's Totally Awesome" cleaner/degreaser!! This stuff is amazing and does the job you want to achieve amazingly!! Also add some to your wash when doing laundry and your stains will be gone and clothes will look brighter.
@danhoy83564 жыл бұрын
I absolutely love your totally awesome videos!
@crazysexycool180
4 жыл бұрын
thank you,
@frekkledipped3 жыл бұрын
I found that stuff works even better if you shake the bottle and get it to foam especially when its down in the bottle a bit
@kingningthougaming5204
2 жыл бұрын
What that spray stuff using here
@vernonbosshard931711 ай бұрын
Soon as you spray the blech white tire cleaner it turns brown and the grease is running off. Cleans the dry brown residue thats left. I have used it carbs too.
@grahamb11723 жыл бұрын
Did you clean the valley and tops of pistons with motor together?
@ericmesi1764 Жыл бұрын
I used a power washer with water and purple power cleaner worked pretty well.
@TearItUpFixItTV
2 ай бұрын
How you dry it off?? Air hose??
@lieberfreialsgleich Жыл бұрын
what about the more important oil channels inside the heads?
@austingibson64283 жыл бұрын
Totally awesome will literally stip the paint off of a car when it's undiluted so be careful people. Let my mistake save you some money.
@Magnetica32
3 жыл бұрын
Thank you for that
@TACOMASRT54 жыл бұрын
People laugh at me but I love LA Totally Awesome
@crazysexycool180
4 жыл бұрын
when they try it they will love it too
@carlosesquivel7889
2 жыл бұрын
Works awesome
@LegitPaintBall1 Жыл бұрын
Your cleaning the valves and mating surfaces with a wire brush, leaving heads on bare concrete and then pressure washing heads like flash rust doesn’t exist. You do understand the average person will destroy his car watch this.
@tybchance6918
Жыл бұрын
Was thinking the same thing lol
@crazysexycool180
8 ай бұрын
aluminum don't rust furthermore the brush is softer then the metal and the bristles will break off before causing any damage.
@thesetruths1404Ай бұрын
I put a pint of brake fluid in a crankcase with 5.5 quarts new motor oil. Do you think that will do anything bad for 5,000 miles?
@divynal662 жыл бұрын
What did you do to get the water out of the powerwashed parts? I'm assuming we don't air dry lol
@vernonbosshard9317
11 ай бұрын
Bauer sawdust blower from Harbor freight.
@Pk3_Garage Жыл бұрын
Just use a Parts Washer. No mess to clean up and it can be environmentally friendly, if using a water base cleaner.
@crazysexycool180
8 ай бұрын
do you realize how much part washer cleaner cost?
@Pk3_Garage
8 ай бұрын
Yes.
@HolyAdonis4 жыл бұрын
have you ever run awesome through a vacuum hose like people do with seafoam?
@justinracine6737
2 жыл бұрын
It’s mainly water whereas sea foam is oil based. Would want to steam clean my pistons
@Abhishek6655gddxg2 жыл бұрын
Yu can use diesel instead it cuts the grease and dirt like a pro
@tylersmith4412 Жыл бұрын
Vinegar works great
@nasqad3357 Жыл бұрын
You should try oven cleaner spray can and let it sit for 5 minute then hit with a pressure washer comes of easy as pie
@factsoverfeelings212 жыл бұрын
LA TOTALLY AWESOME works wonders and I use it to remove anodized parts but it’s does eat away aluminum. Be careful.
@crazysexycool180
8 ай бұрын
Thanks for watching , please like, share, and subscribe
@xjbuild67443 жыл бұрын
Will this work if you leave engine in? I don’t want to pull everything. If not what would you recommend?
@bluefeatherlopez73 ай бұрын
Awesome
@barenekid9695Ай бұрын
Other videos found that Stuff doesn't work. Need a couple Cases of Brake cleaner to Do even a small 4 cyl engine.
@KidFromQueens Жыл бұрын
Degreaser, a brush n a garden hose gets the same results!
@crazysexycool180
8 ай бұрын
brush requires muscle, let the chemical do the work.
@strikevyyper3 жыл бұрын
oven cleaner from the dollar store works even better in my opinion and a lot less money
@crazysexycool180
3 жыл бұрын
how oven cleaner is more then a dollar and very caustic.
@PlanetLutetium
3 жыл бұрын
I second that
@pingpong96562 ай бұрын
Sealing surfaces on concrete? Is that really a good idea?
@ggggggg4327 Жыл бұрын
Or you can use gasoline to clean oily parts.(spraying)
@crazysexycool180
8 ай бұрын
gas is flammable and expensive. now make it make sense
@Mesamanpruitt Жыл бұрын
How much did you spend at the car wash?
@ericblankenship17
Жыл бұрын
🤣🤣
@ldogg5092 жыл бұрын
Is this a commercial for O Reilly's Brake cleaner ?
@crazysexycool180
8 ай бұрын
no commercial but that stuff works the best. Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on KZread for more material on a different level.
@Problems-qp2ud4 жыл бұрын
Thats oil dirt, easy.. How to clean halfcut engine parts like JDM parts which got alloy corrosion?
@crazysexycool180
4 жыл бұрын
ill make a video for u
@chrisburnsed63498 ай бұрын
Nothing cleans and cuts through built up engine oil and sludge like a good ol’ fashioned soaking in gasoline in a plastic tub.
@donaldspeck921211 ай бұрын
If you could spend $200 and buy a 30litre sonic cleaner and 3 gal of Awesome your parts come out amazing while you are doing something else
@Smilesalot1023 Жыл бұрын
And all those chemicals go into the ground, environment, etc. But who cares, your crappy parts are clean.
@BearMeat4Dinner3 жыл бұрын
This looks like a Range rover or land rover. Is it?
@crazysexycool180
3 жыл бұрын
neither.
@tridaks
Жыл бұрын
Head has a Chrysler logo?
@crazysexycool180
7 ай бұрын
correct THANKS FOR WATCHING !!!! Please like share and subscribe, also check my other channel, Salem Taxi on YOU TUBE . Thanks.
@AutodidactEngineer8 ай бұрын
Petrol does a much better job also you don't need to spray 1L bottle over it😂
@crazysexycool180
8 ай бұрын
petrol is expensive , flammable, and toxic for the environment. now what was you saying
@AutodidactEngineer
8 ай бұрын
@@crazysexycool180 I don't know where you live but where I live Petrol is 1.50€ per Liter! And the product that you used is over priced!
@crazysexycool180
7 ай бұрын
where are you from? gas here is $3.00 US and the cleaner is $1.00us per bottle THANKS FOR WATCHING !!!! Please like share and subscribe, also check my other channel, Salem Taxi on YOU TUBE . Thanks.
@AutodidactEngineer
7 ай бұрын
@@crazysexycool180 I'm from Kosova ;)
@crazysexycool180
7 ай бұрын
wow thanks for watching please like share and subscribe i need more folks from your country watching my channel , thanks
Пікірлер: 77
Suggestions: Invest in a cheap electric power washer and reduce the time going to the car wash. Maybe spritz some fogging oil over the internal parts of the engine after washing. Don't use chlorinated brake cleaner if it might come in contact with internal seals; I saw you use non-chlorinated - good choice.
Bro how on earth you gonna sit engine heads down on raw concrete?!
@J05hFontenot
Жыл бұрын
I was thinking the same damn thing
@5starace511
Жыл бұрын
I'm still new to driving but is their a problem with resting my engine or engine head on raw concrete?
@J05hFontenot
Жыл бұрын
@@5starace511 it's likely to mar up the mating surfaces, potentially causing leaks once it's put back together. You need to be careful with heads especially, you don't want a weak head gasket
@castleviewcows.4828
Жыл бұрын
There on sheets of wood and going to be rebuilt.
@KidFromQueens
Жыл бұрын
Bruh, I can't stress how LITTLE that matters! As long as u don't drag it on the ground or put weight on top of it, it's FINE!!🤦🏾♂️🤦🏾♂️
To clean anything really dirty the best method is rinse-wash-rinse. The pressure washer is a terrific tool and should be used first, as it will remove water-soluble dirt and clean a lot of non-water-soluble dirt (oils, grease) using micro-abrasion (which is safe on metals and plastics, at least if they are thick enough to withstand the water blast which engines are). Then you can use surfactants / degreasers / chemical cleaners to remove the remaining oil and grime. Soaking works a lot better after the pre-rinse. Then you can come back with the pressure washer and remove the cleaners and dissolved dirt and whatever it has loosened up. Much more efficient and effective. Rinse-wash-rinse!
@Pk3_Garage
8 ай бұрын
Can't use a pressure washer during the winter.
@tyriqueross4018
7 ай бұрын
@@Pk3_GarageI’m trying to figure out how to degrease my parts in winter as well, have you figured something out?
Thank you for showing "La's Totally Awesome" cleaner/degreaser!! This stuff is amazing and does the job you want to achieve amazingly!! Also add some to your wash when doing laundry and your stains will be gone and clothes will look brighter.
I absolutely love your totally awesome videos!
@crazysexycool180
4 жыл бұрын
thank you,
I found that stuff works even better if you shake the bottle and get it to foam especially when its down in the bottle a bit
@kingningthougaming5204
2 жыл бұрын
What that spray stuff using here
Soon as you spray the blech white tire cleaner it turns brown and the grease is running off. Cleans the dry brown residue thats left. I have used it carbs too.
Did you clean the valley and tops of pistons with motor together?
I used a power washer with water and purple power cleaner worked pretty well.
@TearItUpFixItTV
2 ай бұрын
How you dry it off?? Air hose??
what about the more important oil channels inside the heads?
Totally awesome will literally stip the paint off of a car when it's undiluted so be careful people. Let my mistake save you some money.
@Magnetica32
3 жыл бұрын
Thank you for that
People laugh at me but I love LA Totally Awesome
@crazysexycool180
4 жыл бұрын
when they try it they will love it too
@carlosesquivel7889
2 жыл бұрын
Works awesome
Your cleaning the valves and mating surfaces with a wire brush, leaving heads on bare concrete and then pressure washing heads like flash rust doesn’t exist. You do understand the average person will destroy his car watch this.
@tybchance6918
Жыл бұрын
Was thinking the same thing lol
@crazysexycool180
8 ай бұрын
aluminum don't rust furthermore the brush is softer then the metal and the bristles will break off before causing any damage.
I put a pint of brake fluid in a crankcase with 5.5 quarts new motor oil. Do you think that will do anything bad for 5,000 miles?
What did you do to get the water out of the powerwashed parts? I'm assuming we don't air dry lol
@vernonbosshard9317
11 ай бұрын
Bauer sawdust blower from Harbor freight.
Just use a Parts Washer. No mess to clean up and it can be environmentally friendly, if using a water base cleaner.
@crazysexycool180
8 ай бұрын
do you realize how much part washer cleaner cost?
@Pk3_Garage
8 ай бұрын
Yes.
have you ever run awesome through a vacuum hose like people do with seafoam?
@justinracine6737
2 жыл бұрын
It’s mainly water whereas sea foam is oil based. Would want to steam clean my pistons
Yu can use diesel instead it cuts the grease and dirt like a pro
Vinegar works great
You should try oven cleaner spray can and let it sit for 5 minute then hit with a pressure washer comes of easy as pie
LA TOTALLY AWESOME works wonders and I use it to remove anodized parts but it’s does eat away aluminum. Be careful.
@crazysexycool180
8 ай бұрын
Thanks for watching , please like, share, and subscribe
Will this work if you leave engine in? I don’t want to pull everything. If not what would you recommend?
Awesome
Other videos found that Stuff doesn't work. Need a couple Cases of Brake cleaner to Do even a small 4 cyl engine.
Degreaser, a brush n a garden hose gets the same results!
@crazysexycool180
8 ай бұрын
brush requires muscle, let the chemical do the work.
oven cleaner from the dollar store works even better in my opinion and a lot less money
@crazysexycool180
3 жыл бұрын
how oven cleaner is more then a dollar and very caustic.
@PlanetLutetium
3 жыл бұрын
I second that
Sealing surfaces on concrete? Is that really a good idea?
Or you can use gasoline to clean oily parts.(spraying)
@crazysexycool180
8 ай бұрын
gas is flammable and expensive. now make it make sense
How much did you spend at the car wash?
@ericblankenship17
Жыл бұрын
🤣🤣
Is this a commercial for O Reilly's Brake cleaner ?
@crazysexycool180
8 ай бұрын
no commercial but that stuff works the best. Thank you please like, share, and subscribe, also please check out my other channel Salem Taxi, on KZread for more material on a different level.
Thats oil dirt, easy.. How to clean halfcut engine parts like JDM parts which got alloy corrosion?
@crazysexycool180
4 жыл бұрын
ill make a video for u
Nothing cleans and cuts through built up engine oil and sludge like a good ol’ fashioned soaking in gasoline in a plastic tub.
If you could spend $200 and buy a 30litre sonic cleaner and 3 gal of Awesome your parts come out amazing while you are doing something else
And all those chemicals go into the ground, environment, etc. But who cares, your crappy parts are clean.
This looks like a Range rover or land rover. Is it?
@crazysexycool180
3 жыл бұрын
neither.
@tridaks
Жыл бұрын
Head has a Chrysler logo?
@crazysexycool180
7 ай бұрын
correct THANKS FOR WATCHING !!!! Please like share and subscribe, also check my other channel, Salem Taxi on YOU TUBE . Thanks.
Petrol does a much better job also you don't need to spray 1L bottle over it😂
@crazysexycool180
8 ай бұрын
petrol is expensive , flammable, and toxic for the environment. now what was you saying
@AutodidactEngineer
8 ай бұрын
@@crazysexycool180 I don't know where you live but where I live Petrol is 1.50€ per Liter! And the product that you used is over priced!
@crazysexycool180
7 ай бұрын
where are you from? gas here is $3.00 US and the cleaner is $1.00us per bottle THANKS FOR WATCHING !!!! Please like share and subscribe, also check my other channel, Salem Taxi on YOU TUBE . Thanks.
@AutodidactEngineer
7 ай бұрын
@@crazysexycool180 I'm from Kosova ;)
@crazysexycool180
7 ай бұрын
wow thanks for watching please like share and subscribe i need more folks from your country watching my channel , thanks