Thanks mate. Very helpful videos.

@TheInsightDistrict

2 жыл бұрын

not a problem, im glad that they help

Thanks for the video! Easy to follow and made the job easy. Had a bit of trouble getting the rubber hose off the body just needed a bit of prying with the screwdriver and all sorted.. Next on the list, EGR Valve and intake manifold.

@TheInsightDistrict

2 жыл бұрын

Glad it helped

Superb...cleaned my MAF - then watched this...did my Throttle body! Easy! Great tutorial.

@TheInsightDistrict

2 жыл бұрын

glad it helped

Awesome. Thanks for the tutorials and yes, I would love to watch EGR cleanup too.

@TheInsightDistrict

4 жыл бұрын

Its a video i really want to do, my issue is having the time to do it as my full time job is pretty busy at the moment and havent had time to do it, so i havent had time to film anything lately, but im going to try and find some time soon to do it, so keep an eye out for when i release new videos, thanks for the comment

@triazlan

4 жыл бұрын

@@TheInsightDistrict no worries at all, take your time and definitely keep an eye for more videos from you.

Excellent video, thanks for this, I have subbed and am going to follow to do some diy preventative maintenance on my 3,2L px ranger

@TheInsightDistrict

2 жыл бұрын

Thanks for the sub!

awesome vid,

@TheInsightDistrict

4 жыл бұрын

Thanks heaps, I make videos to help people. Share the videos that you like in the groups you are in that way other people can learn and save money

Love your work!!!! Your saving me money, many thanks!!!

@TheInsightDistrict

4 жыл бұрын

Your more then welcome, thats part of the reason i do the videos. make sure you share them in facebook groups and other groups you are in so that way we can help as many people as possible. If there is anything i can help you with feel free to get in contact and i will try and help as much as i can. Thanks for the feedback, its very encouraging to hear

Good video mate 👍🏻 I also want the intake clean video ASAP. Keep it up mate 👍🏻

@TheInsightDistrict

4 жыл бұрын

I have a couple of days off of work in the next week or two so I might film it then, thanks for the feedback, it's appreciated

@michaelturner1732

4 жыл бұрын

The Insight District - When you have got it done I’ll post it to the Mazda BT50 Facebook groups. Every second post is about the intake manifold or EGR delete etc.

Hey mate great vid. I want to see you do EGR valve clean and in take. 👍after watching this video I was stuck at home (covid 19) went out the the bt50 and cleaned my throttle. And it was filthy want to go further but unsure.

@TheInsightDistrict

4 жыл бұрын

Glad you liked the video, I'm still fairly new to making videos so if you see something that I can improve on let me know, also if you think of any videos I could make to help others let me know, I'm not a mechanic, so I only make videos that are within my skillset which means anyone can do it. Hopefully I can film the the I take video in next week or two, I still have to go to work unfortunately so it limits my time to film, but will try my best to get it done. Once again glad you like like the video, share it in Facebook groups or anywhere else if you think it will help other people out 😊

Looking forward to that EGR clean up.

@TheInsightDistrict

4 жыл бұрын

ill try and make it ASAP 👍

@TheInsightDistrict

3 жыл бұрын

the intake videos are out, have a watch of them

Hey man how tu replacement radiator?

what is the biggest throttle body safe to use on a ford ranger 2.2 tdci?

Im thinking of doing this on my 06 ranger because my throttle is starting to actually stick. Like I'll step on it a bit to get it moving (its a manual) and the throttle will stick, so I give it a bit more juice and it goes down WAY to much putting me at 3-4k RPM, and I don't know if you've ever driven a manual before but you shouldn't be doing that to your poor clutch lol. So yeah, need to fix this. Pedal is free from carpet/matt hitting it and when pressing it with my handle shut off it is smooth, making me believe its the TB.

@TheInsightDistrict

2 ай бұрын

yea it wouldnt hurt to do, i dont know what it would be like doing it on your model, but all you can do is try

Hey, thanks for the informative video's! Am following them step by step ALL of them :D I have a 2014 Ford Ranger and the TPS sensor reads 94% all the time. And visually checking it, its way open all the time. I have trouble figuring out if thats normal.. Would appreciate your opinion on that, im VERY limited with proper workshops here (live in Myanmar and have to do most porblem solving and repairs myself) thnx!

@TheInsightDistrict

3 жыл бұрын

Glad the video helped, check out the other videos on the page and make sure you share them in groups you are in to help other people

@niclashamrin3559

5 ай бұрын

Did you ever found out if that is normal? My TPS is always 100%, and does not move weather the car is cold or warm, much gas or no gas. Cant find any information about that.

The cleaning of the hose would baby bottle brush do that better.?

@TheInsightDistrict

4 жыл бұрын

Possibly, but because it's oil based carbon, I don't think it would move it too well. I use a rag because it may absorb some of the wet carbon that's in the pipe

Are you going to fit a catch can and EGR blank off or switch off on ecu?

@TheInsightDistrict

2 жыл бұрын

nope never did either of those

no problem touch The butterfly.because some people say can not touch The butterfly.maybe will be damage and idle problem

@TheInsightDistrict

3 жыл бұрын

I had the throttle body completely disconnected and was not rough with it, i had no idling issues and everything is operating correctly, have a watch where i am cleaning the butterfly and how i handle it

What does ESC service mean, it always flashing out on the dash

@TheInsightDistrict

2 жыл бұрын

check out your vehicles manual and it might be able to tell you

after cleaning job,have to leaning with scanner or not?

@TheInsightDistrict

8 ай бұрын

nope

Hi ,can some help me by sorting out my problem in ford ranger .when I start my car the engine start blow water through reserve tank ,wats the solution for this.

@TheInsightDistrict

3 жыл бұрын

unfortunately this is too hard to diagnose over the internet, you may need to see a mechanic

@TZGreg

3 жыл бұрын

Possibly leaking head gasket is my guess.

Great. Can i use diesel intead of throttle body cleaner?

@TheInsightDistrict

3 жыл бұрын

you can, dont know how good it will be though

@icemuzic

3 жыл бұрын

@@TheInsightDistrict thanks. I already cleaned mine, very satisfied with the output. Acceleration is back to normal and not to mention the gas mileage. 👌.

Did you recalibrate the throttle body to the pcm when reinstalled?

@TheInsightDistrict

3 жыл бұрын

No i didnt, just plugged it in and turned it on, worked fine

Hi, just wanted to ask. Do you know where the TPS sensor is located?

@TheInsightDistrict

2 жыл бұрын

unfortunately i dont

@sjaramillo26

2 жыл бұрын

I keep getting a check engine light and the scan says it’s the throttles position sensor. At certain speed the revs start oscillating, might it be I just need a clean?

After cleaning no need to reset or recall anything in the system? Thanks...

@TheInsightDistrict

2 жыл бұрын

nope, its just plug and play

I just cleaned mine at 40,000 km , I was shocked how dirty it was, how does it get so dirty?

Why do you need to remove the bottom hose for ?

@TheInsightDistrict

4 ай бұрын

just good to clean it out

How to replace the glow plugs..

@TheInsightDistrict

4 жыл бұрын

This might be a little too technical for what I do, but I'll look into it

Is that a 2.2 tdci?

@TheInsightDistrict

4 жыл бұрын

I did this on a 2017 PX mkii 3.2L ford ranger

My ford ranger dont have much power, what is the problem?

@TheInsightDistrict

4 жыл бұрын

Without knowing the ranger or seeing the ranger in person it is very hard to diagnose what the problem could be sorry.

What symptoms if any would you experience when you’re throttle body needs to be cleaned

@TheInsightDistrict

3 жыл бұрын

you would have a higher fuel consumption and the vehicle wouldn't have as much power as it should due to the engine not receiving as much air as it should

@jeakellliberato7072

3 жыл бұрын

​@@TheInsightDistrict​awesome video. when i start my vehicle in the morning i could not start it in 1 click, i have to wait for couple sec and try it again it start. does this symptom connected with my egr? i want to clean my egr.

@TheInsightDistrict

3 жыл бұрын

Do you wait for the glow plug coil icon to go away before trying to start the vehicle?

@jeakellliberato7072

3 жыл бұрын

@@TheInsightDistrict Yes sir.

@TheInsightDistrict

3 жыл бұрын

@@jeakellliberato7072 there could be a number of factors causing this, its hard to determine without seeing the vehicle itself

Can I use a normal WD40?

@TheInsightDistrict

3 жыл бұрын

you probably can, but i would use a solvent to remove any residue that is left over

Bro! wheres the intake manifold vid?

@TheInsightDistrict

3 жыл бұрын

part 1 got uploaded the other day, have a watch

Where is the iac?

@TheInsightDistrict

2 жыл бұрын

whats IAC?

Would i need to reset the idle?

@TheInsightDistrict

2 ай бұрын

nope, the ecu adjusts it for the correct air/fuel mix