Giveaway at 2k! Be sure to subscribe and hit a the like on the video ❤❤❤

@AllenHart999

9 ай бұрын

not long now

@Heatking

9 ай бұрын

@@AllenHart999 cheers buddy. Thank you for your help!

@AllenHart999

9 ай бұрын

you haven’t got any tags on this video@@Heatking

@AllenHart999

9 ай бұрын

seo score is 5 out of 100 @@Heatking

Another top job Dan. It is a shame the obstacles in the way of the plate make you have to cut pipe work or remove the pump assembly ❤

@Heatking

2 ай бұрын

Cheers mate. Yeh it is a shame, seen as other manufacturers make it so you don’t have to take anything out the way to replace it!

I have always cut away the hot or push it out of the way. I fit new plate as well. Nasty stuff drain acid. Top video.👍

@Heatking

20 күн бұрын

Yeh it is nasty stuff! I hate cleaning them mate, but yeh hot or cold out the way definitely helps 💪🏼

Good video. Worcester Bosch Plate Heat Exchangers are not the easiest repair on them old ones. The new Worcester Bosch 4000 is amazing though. Really good video for Trainee gas engineers. Thanks.

@Heatking

9 ай бұрын

Thank you Allen. The 4000 plate removal was so simple at your house, litterally only needed a Philips screwdriver to do the job 😂

@AllenHart999

9 ай бұрын

you mean the worcester bosch 4000 lol @@Heatking

@AllenHart999

9 ай бұрын

or the worcester bosch 4000 combi boiler heat exchanger that gets blocked on dirty central heating systems@@Heatking

@Heatking

9 ай бұрын

@@AllenHart999 oh yes. Best than that ‘Navien boiler’ 😂😂

@AllenHart999

9 ай бұрын

do you mean the worcester bosch boiler is easier to repair a blocked plate heat exchanger than a Navien gas combi boiler @@Heatking

If you ever have the worcester with the vent tube on top of the kebab heat exchanger.. what I do it drain the boiler at the point by the diverter. Then put the vent tube into a bottle of system cleaner, open the vent tube and syphon all the cleaner into the boiler..... pressurise the boiler, isolate flow and return, and run the hot tap on low temp and it will flush just the plate out.. Once it's been ran for a while until temps are stable on high... flush cleaner out and open flow and return valves... always works for me..

@Heatking

9 ай бұрын

I knew about that strategy mate but for some reason didn’t associate it with the plate, I just assumed it cleaned out the main hex.. what a donut haha. Thanks for the advice Brendan! 🫶🏽

plumber cleaning boiler a fault on a worcester bosch gas boiler with no hot water, gas engineer and plumbing repair. gas man loves worcester worcester repair gas engineer gas safe boiler breakdown worcester bosch greenstar 30i erp plate heat exchanger plate heat exchanger blocked heat exchanger heat exchanger repair worcester boiler

@martinthornley237

22 күн бұрын

Listen to Alan he's the daddy of youtube!! Love your work guys keep up the good contents both of you

Great video - learning all the time.😊

@Heatking

9 ай бұрын

So am I mate 😂😂😂 cheers 🫶🏽

Good content. Thanks again mate.

@Heatking

9 ай бұрын

Thank you Paul. Anytime 🫶🏽

Mint video Dan, I use a acid called Jebsol lethal stuff mate but does the job. All honestly In 16years I’ve never swapped a plate always cleaned Keep at it Hustler 👊🔥

@Heatking

9 ай бұрын

Cheers Nath, I’ll check that stuff out, where do you get it from please? 🫶🏽thanks for the support mate.

Love a woosta plate job! Great vid Dan 👊🏾

@Heatking

9 ай бұрын

Thanks mate 🫶🏽 cheers for the support 🫶🏽

@AllenHart999

9 ай бұрын

Them Worcester Bosch Plate heat exchangers are so easy lol.

All plates can be cleaned using similar chemicals,they're mostly made by specialist companys. A tip I was given was measure hot outlet and return temp and expect ideally 1c diff. Yes advise power flush and filter if not fitted. Top tip 2litres of the best known inhibitors is the ideal on average property, it will bring the ph closer to to neutral ph.

@Heatking

9 ай бұрын

Cheers John! I’ll use this tip going forward! Thank you.

Well done 😊

@Heatking

9 ай бұрын

Cheers Paul 🫶🏽

@paulj9022

9 ай бұрын

@@Heatking 😀 ❤️

I used to work for Worcester and in my opinion the 25. & 30i ERP is the best model Worcester ever made. The easiest way to test a plate blockage is to measure the flow temp by the display temp and then measure the hot water outlet temperature either at the tap or pipe underneath. The temperature difference should be 10 degrees max. So if tap reading 50, boiler should display 60. If more than this like 20 degrees etc, plate is blocked. 👍

@Heatking

9 ай бұрын

Thank you Kev, would you say this method above only works on Worcesters or all plates? I was always taught to measure the flow and return difference in the boiler like I’ve done on this.

@kevincranfield5235

9 ай бұрын

All boilers are different. Manufacturer specific. This as far as know only works for Worcester. Ideal you would test return temp and hot water outlet temp, less than 5c is good, 10 or above etc would be blocked. I’ve done a video on the ideal on Allen hart channel ages ago.

@Heatking

9 ай бұрын

@@kevincranfield5235 I’ll try find it mate and take a look! Thank you.

@kevincranfield5235

9 ай бұрын

m.kzread.info/dash/bejne/iWmDzdeFepe0fLw.html

@MrVacuumCleaner

9 ай бұрын

I’m still keen to know what that extra tap on the bath is for……😂

Mate, just come across your videos, as a Gas engineer they're very informative to watch. As we like our tools, that little gadget you got for the silicon grease where can I get one, looks mint!?

@Heatking

9 ай бұрын

Thank you for the kind words mate! And if you search ‘mini grease gun’ on Amazon you’ll find them 🫶🏽

@MrVictorvolvo

9 ай бұрын

Thank you, much better then carrying a tube of lube which almost always splits at some point!

@Heatking

9 ай бұрын

@@MrVictorvolvo yeh you’re right, I find you use a lot more out a tube aswel. And it’s not the cheapest of stuff!

@Heatking

9 ай бұрын

@@MrVictorvolvo yeh you’re right, I find you use a lot more out a tube aswel. And it’s not the cheapest of stuff!

Another way and tip I do to remove the plate from Worcester’s is taking off the left hand manifold and the pipe that links from the hot water out and it comes out soo much easier

@Heatking

9 ай бұрын

Great tip that mate, really appreciate the advice! 🫶🏽

Hot and Cold taps in the basin on the wrong way round!!

@Heatking

9 ай бұрын

Yep I noticed that 😂

Wooster Wooster. Why do you love them so much Dan. They really dont love you. 😂. Good content pal.. As others have said, i think cutting the hot pipe is probably a bit easier. But as you stated baxi plates vertually just slide off on their own. Lol

@Heatking

9 ай бұрын

Yeh hot I think I’ll do next time.. always learning.. haha. It’s a love hate relationship we have mate 😂😂😂 Cheers Mac 🫶🏽

@macpatel7810

9 ай бұрын

@@Heatking lol. You love them but they hate you 😭😂

@Heatking

9 ай бұрын

@@macpatel7810 yep that’s exactly it haha

Im sure its a staple of the plumbing community 6:05 😂😂

@Heatking

9 ай бұрын

😂😂😂😂

@wolvolad25

9 ай бұрын

@@Heatking but seriously another interesting video thanks

@Heatking

9 ай бұрын

@@wolvolad25 thank you mate 🫶🏽🫶🏽🫶🏽

Hi, thanks for always great videos, just a simple question, have you listened to your videos? The music is too laud and when using headset it's going to make you deaf.

@Heatking

9 ай бұрын

Yes I edit the videos so I do listen to them. Do you mean the intro music, I think that’s the only music I’ve had on for a while. If so, I’ll look to try and turn that down mate . Thank you. 🫶🏽

Any more install vids coming up mate?

@Heatking

9 ай бұрын

I certainly bloody hope so mate. I could do with boiler boiler jobs haha. But yeh we got one first week of oct 🫶🏽

Easiest way on these is to disconnect expansion vessel pipe and take pump out.. plate will come out.

@Heatking

9 ай бұрын

Cheers mate, seems I did it the hard way 😩

Another tip to get the plate out. Remove the hot pipe connection from the boiler and the plate wil drop out. I think Geoff needs has made a video on how to do it. Dead easy

@Heatking

9 ай бұрын

Yeh the cold didn’t really do me any favours on this one 😂😂

@kevincranfield5235

9 ай бұрын

m.kzread.info/dash/bejne/g5d3xZWmncuxh9I.html&pp=ygUZR2VvZmYgbmVlZHMgcGxhdGUgaGVhdCBleA%3D%3D

@kevincranfield5235

9 ай бұрын

Next time you do one, try that. Dead easy and hydraulics are very similar.

@Heatking

9 ай бұрын

@@kevincranfield5235 cheers Kev!

@kevincranfield5235

9 ай бұрын

I think your videos are great by the way. 👍 forgot to mention that.

What’s the silicone grease dispenser thing called? 😅 cheers

@Heatking

9 ай бұрын

Amazon ‘mini grease gun’ matey 🫶🏽🫶🏽

@connerhuetson3581

9 ай бұрын

@@Heatking life saver, cheers mate

@Heatking

9 ай бұрын

@@connerhuetson3581 anytime mate

Just be careful on worcesters, youve got to realise that boiler can only produce approx 11l per min, if your opening up that hot tap fully at start, it looked alot more than that and the heat transfer wont happen and cause the boiler to overheat. Its one of the biggest callouts i get and when i tell customer to turn hot tap open a quarter of way it will give the heat transfer the best chance and pretty much make boiler stay on. Also worth noting on those 30i erps, the diverter motor/paddle tend to get weak and put heat down the flow due to blocked plates. In my opinion, there one of the worst theyve made, cdi range is so much better. Good video though mate. I would never use acid, just replace. Ive seen blokes getting some nasty burns.

@stevenmawhinney5007

9 ай бұрын

Also for those plates, but a black rubble bags, the ones you get from screwfix and it will catch pretty much all the water.

@Heatking

9 ай бұрын

Thanks Steven, good call on opening the tap up full at the start. I’ll not do that in the future. Yeh I’ve heard about the paddles. I’m Not sure if you could see but I kept putting my hand on the flow pipe to check it wasn’t seeping down there, thanks for the advice mate 🫶🏽

@Heatking

9 ай бұрын

Another good idea!! 😂🫶🏽🫶🏽

Do you like vaillant eco tex

@Heatking

9 ай бұрын

I’m not a fan of Vaillants to be honest, I find them expensive to buy and expensive to repair, but they are reliable.

@AllenHart999

9 ай бұрын

do you like navien combi boilers i heard the plate heat exchangers are easy on them, better than the worcester bosch lol @@Heatking

@Heatking

9 ай бұрын

@@AllenHart999 I don’t know where you heard that. The navien combi boiler I worked on, the plate heat exchanger, required the expansion vessel to be removed first! Worcester Bosch boilers and baxis boilers are much easier for a gas safe engineer to work on 😂

Jesus, that boiler looks like a bag of crap to work on. Why people like Worcesters I'll never know, hateful things.

@Heatking

9 ай бұрын

Haha they’re not normally too bad mostly. I probably Made it look harder than it needed to be 😂😂😂

@AllenHart999

9 ай бұрын

Gas engineers and plumbers have to repair any gas boilers they get called to. The worcester bosch is easier than some.