How To: Choose Precision Washers with Thane Magee | MuirSkate Longboard Shop
Спорт
Tune in with Thane Magee from Array Washers, as he explains how his customizable Precision Washer system can greatly improve your ride.
Check out Array Washers below!
www.muirskate....
Don't forget to check us out on Facebook, Twitter, and Instagram for giveaways, updates, and event information.
/ muirskate
/ muirskate
/ muirskate
Music by Your Neighborhood Elevator
Film: Joe Gutkowski
Edit: Joe Gutkowski
Пікірлер: 14
Very brilliant way to make something good even better at a low cost!
Array-Products is proud to announce that we have received a US Patent for the Sleeved griped washer system and the stepped washer system along with 21 other designs that work with this system. GSK8
The best way to explain this is your stock truck set up, what simple geometry you are matching up with. So take one stock set up truck and then change out the other truck the way you can match up the other truck. Want most people like the barrel sleeved washer on top and bottom or cupped bottom and sleeved on top. As long as you can match the stock geometry then it will work right. Setting up the washer the way you want is a another thing and you need to play around with that, you know what you like. I really wanted to show that the flat washer is the most adjustable washer out of all the washer I sell because people need to know that there are more ways to set up there trucks. We did not have a lot of time to explain everything that we filmed. The other thing that got cut out of the video is that the patent is coming. GSK8
@xerxesdacat
2 жыл бұрын
what is the recommended setup for Freestyle? Is it machined cup washers board side and sleeved washers roadside? or is it two sleeved washers board side and roadside?
I know this video is super old but I just ran into the issue today I can't figure out how to remove the cupped version of this washer from my bushing
@xXThorsMjolnirXx
2 жыл бұрын
remove it like bearings in wheels
I just got an Exway Flex Riot board... What would be the best precision washers I should get for my board? I also am going to ride the 105MM Cloudwheels
Does the machined cup washer alone match the geometry of cronins boardside? I bought an Amish cup washer recently and it was too tall to match with the ronins bushing seat when it was put boardside so I was wondering if array cups were different
what washer would be best for reduced speedwobble without losing the carving capabilities??
That name is awsome
@rowanc1ty358
13 күн бұрын
trust me he’s crazy