Would love to hear a little more in-depth on compressors and paint gun sizing and applications, especially for cabinet work. Thanks and great video !

I am in the market for an air compressor, so thank you for this awesome video!

Thanks guys, I’m 20 and I’ve always admired they way you guys teach people of all ages to get things done. ✔️

@kingcrownp7130

3 жыл бұрын

You 20 yr old punk back in my day we made our own tools..

@ahyaan2552

2 жыл бұрын

@@kingcrownp7130 gofly

I love my California Air Tools compressor. The little 6 gallon can keep up with anything I have & it's so quiet that you can have a conversation in a normal voice right next to it while it's running & not have to yell. =)

I went to the smallest vertical one I could find. Those horizontal ones are a pain to roll around because you can't tip them up to high before the tank drags on the ground.

Can you do a video on modified vs unmodified thinset please

Good Info...

You'll love mine. It's a 10 gallon plumbed into a 50 gallon hot water storage tank lol

@moejoejoe

5 жыл бұрын

@@jasenrock Nonsense. Hot water tanks are built to withstand high pressures. And if he left the overpressure release valve on the tank there's very little risk of tank failure.

To inflate a commercial tire for a semi truck around 105 psi how powerful or big the compressor has to be at minimum. I don't want to buy too much. Just for my personal use on my truck. Thanks

What is the right air compressor for a Jackhammer. Knowing that the jackhammer will be used for non intensive work. Basicity just for personal use not construction hard work usage?!

You know that one your neighbor has? Go buy one bigger!!

also remeber you need air tool oil for the tools

@augustreil

5 жыл бұрын

True Story ! Most people forget for some reason ?

@sheep1ewe

5 жыл бұрын

There are miniature automatic oliers one can screw on the airline some tools, wich are supposed to generate an oilmist in the intake, but i also oils some of them separatly right before using them.

was tommy sick? voice sounded off. get well soon if so. love TOH

@patrickm.parisou8328

5 жыл бұрын

Watchmen Property Inspection I’m feeling icky. Can you wish me the best?

Check out Castair for all compressors and parts. They have the fastest turnaround time in the industry right now big and small!

❤Wow I just learned the reasons for the numbers on a air compressor loll and to think I would use 😲my kids dads compressor loll sh....h!....😂 to air up balls & balloons for my kids when they were little!!😄

@0:41 Freddy looks around did someone say Under Pressure

by adding a second auxiliary tank to an air compressor will that increase or decrease performance like SCFM? thanks!

@luchvk

2 жыл бұрын

It would do neither. It would effectively only give you a bigger tank and that tank would take longer to fill. Also, it would make the compressor work harder. The "ON" time of the compressor would need to be managed to avoid damage. Though, the air in the tank(s) doesn't have a practical CFM limit. It's limit is the size of the opening it's able to pass through. So, it would work like a compressor with a higher CFM rating. It would work like that until the pressure in the tank(s) lower(s). (I know that your comment is two years old but maybe this is still useful info.)

@MrBod4life

2 жыл бұрын

@@luchvk i appreciate it man. I still needed that information

@luchvk

2 жыл бұрын

@@MrBod4life Glad to help!

I got one. Is it safe to use on condenser coils on your fridge?

@broken_font1881

3 жыл бұрын

Only if you don't exceed about 20psi on the air regulator when you're blowing off the dust

Is it safe to keep the air compressor in the garage?

@broken_font1881

3 жыл бұрын

Only if you drain the tank of water after every use

👍👍👍

What’s the danger of a rusty tank and how do you fix it?

@Marcel_Germann

5 жыл бұрын

What could happen to a reservoir which holds pressure and its wall is weakened? In the worst case: Boom! Don't mess with repairs on the tank, exchange it. It's a matter of safety.

@eosjoe565

5 жыл бұрын

A rusty tank is very dangerous as it can explode without warning. There really is no easy / safe way to repair a rusty tank on a home air compressor. It's not just the rust you see. If you SEE rust chances are there are more areas that have rusted but isn't visible yet. If your tank has gotten rusty it's probably time for a new air compressor. The best way to prevent rust in the tank is to drain the water out regularly.

@augustreil

5 жыл бұрын

Amirhousein Hazratifar, Most will start with a small leak and not an explosion. I have seen most occur around the drain area.

@zack9912000

5 жыл бұрын

You have to either bleed the air out of the tank every time or use a timed Solenoid that pushes water out of the bottom of the tank.

Most traditional air compressors are as loud as a lawnmower, and they didn't mention the dB's these things make? I'll ONLY buy low noise compressors. They should have shown a comparison between traditional vs. low noise.

@BeckVMH

8 ай бұрын

Yes, and should be a concern for anyone considering a purchase. Wish I’d known beforehand. I wear ear protection when using my 6 gal Craftsman.

get the newest , biggest one you can afford/have room for

@johnanders8861

4 жыл бұрын

new england endler I totally agree. I have a 60 gallon Ingersol Rand 220 volt. I do a lot of body work and it runs constantly.

Hazzard fraught. The big rock candy mountain.

Bring back Steve Thomas!!!!!!!!!

This video didn't really do as the title suggests. No surprise, as that seems to be how internet providers like to get you to click on their videos. I used to watch the original "This Old House" with Bob Vila when it first aired...I think in the early 80s. Most of the videos/episodes back then, never really went into depth on any particular project. Nevertheless, it was the first of its time, and I rarely missed an episode.

Kevin is looking a little heavy. Hoping everything is okay with him. He is an asset to this show.

@chrisfi3d

5 жыл бұрын

Lol I’m sure he’s fine.

I have a hardon for MaxTools high pressure systems. If you do alot of large nail nailgun work(4inch nails or bigger) get the Max HS130. It is the best big nail nailer on the market. You can argue otherwise but you are simply wrong. The benchmark for big framing nailers is the Bostich Big Berta. That big bitch weighs 25 lbs or more iirc. Hs130? 10lbs. You can't beat that. You just cant. The downsides of highpressure systems be what they may. The hs130 is god tier

Is there a festool of job site air compressors? All of them i have used SUCK for one reason or another

@williamsmith9026

5 жыл бұрын

@wimmisky Thanks Will do some digging

@RealRuler2112

5 жыл бұрын

@@williamsmith9026 I got a CAT 6 gallon several years ago from Menards for like $140 less 11% rebate & absolutely love it. =)

@denisrhodes54

5 жыл бұрын

quincy QR-25 amish use AIR power tools and leave the ENGINE driven compressor running all day

I think Kevin O'conner's been smoking weed before the show in this episode.

I saw this in 2014

@brian1157

5 жыл бұрын

Yup. I've noticed they have been doing a lot of things over again.

@CT112380

5 жыл бұрын

My recommended videos to watch next literally pointed me to the previous version.

If you really don’t know how to use a compressor go back and sit in the trailer

I like my Air compressors how I like my wammen big 😏😉

@DGCDWJ

5 жыл бұрын

W A M M E N