Only thing this great video left out is to let the bike run 5 minutes, cool down and check the oil level on a flat surface.

@EmotiveGrunt

Ай бұрын

@@theodoreceplina6064 mtmatt is talking about checking the oil level after oil change is done

Right to the point with detail and torque specs! Well done mate 🍺

Lovely work B-rad. Quality video that is straight to the point. Thanks and keep up the splendid work!

Heck yeah dude. Nice, clean, simple yet detailed tutorial. Cant wait for more to come. Hope you’re enjoying life.

@BradTheBuilderChannel

2 жыл бұрын

Thanks!! Much appreciated

thanks for this! most detailed video on YT for MT/FZ07

@BradTheBuilderChannel

Жыл бұрын

Thank you very much!

Specifying the socket size and torque setting. That’s pretty detailed alright. Thanks.

Ez job and thank you for this clips !

Great video straight to the point with good clear instructions and a great view of everything you're doing also I have that same exhaust very nice

Nice one Brad, appreciated.

Awsome work!! 🤩 thanks

@BradTheBuilderChannel

2 жыл бұрын

No problem!

Awsome content, Im fallowing you when I Was planning to buy MT07 and I did so :) I Hope that you will get more views an followers. Keep up good work. 👍

@BradTheBuilderChannel

2 жыл бұрын

Thank you very much!! I try to make my videos better and better. I hope KZread’s algorithm eventually gets me in front of more awesome people like yourself. You commenting with such positivity gives me a big boost so thank you for that! Safe riding! Peace ✌️

Good content keep up the good work hope to see your channel grow been thinking about starting a moto channel with my 2022 MT-07

@BradTheBuilderChannel

2 жыл бұрын

Thanks 2Tooth! I really appreciate the comment

@Hoosier_Daddy920

2 жыл бұрын

@@BradTheBuilderChannel welcome man 🤘

Question how many bottles of oil did you use in all? And by the awesome videos you make👌🏽👍🏽💯

Hey B-rad! I just did my first ever oil change on my bike and I put 2.75 Quartz of oil with the new oil filter, but when I check the oil level on the bike the window is fully covered. If I barely tilt the bike to the right (like 1cm tilt) the oil level shows up in the window and its under the maximum mark. How is the behavior on the bike in the video? Thanks

Do not torque it to 32ft pound, the manual has a mistake in it, tons of people have stripped the threads using that torque value and had to replace the oil pan. 17-20ft pound is plenty of force.

Do you change crush washer with every change or every other?

Are they red wing moc toe boots?

How do I check my oil? 2.43 is pretty specific

I may be late but my dealership gave me 15w50 for mine. Is that normal?

What specific pitbull stand you got on the rear and the rear spool

@BradTheBuilderChannel

2 жыл бұрын

It’s part number F0028-000 for the pit bull stand and I’m using tst industry spools. It works but it’s with the adjustable arms all the way out. The stand is also universal and can use just the bumps instead of using the spools if desired.

is it of vital importance to change out the crush washer? if so what size and where can I acquire one?

@bike.bro.s

4 ай бұрын

also wondering about the size of the washer

Is it better to do 15 ft/lbs or 32 ft/lb ?

People saying diesel oil is the go? Is this true??

I have my brand new 2022 Mt 07 , and Oil filter on it is 5gh-13440-80. Can't find this filter. Is all of them same 5gh-13440-60, 5gh-13440-61, 5gh-13440-80?

@BradTheBuilderChannel

Жыл бұрын

Call the dealer who you got it from and see if can be crossed. I’m not sure if they can be. I would assume it’s a very small difference.

@artyom188mph

Жыл бұрын

@@BradTheBuilderChannel I figured it out, all of them are same filters, last numbers means generation, first was 60, after few years it came to be 61 , in this year it's marked 80.😄

@BradTheBuilderChannel

Жыл бұрын

@@artyom188mph thanks for coming back and posting this in the comments. I figured it had to be something that wasn’t too crucial

@g2westwood

11 ай бұрын

​@@BradTheBuilderChannel You should mention this in the comments , I was also stumped for a minute . Perfect video , very detailed. Thanks 🤙

The only thing that I'd add is how to use the sight glass, some people don't know what its for

@BradTheBuilderChannel

2 жыл бұрын

Very good call Tyler! Very important for it to be on level ground when check as well.

@davidleonard8369

Жыл бұрын

If you put in 2.75 qts of oil the level is above the sight glass. Go figure.​@@BradTheBuilderChannel

@PIZZAenjoyer8767

Жыл бұрын

@@davidleonard8369 just encountered the same thing! how did you deal with it? did you leak some out or ?

@davidleonard8369

Жыл бұрын

@@PIZZAenjoyer8767 nope. My cousin has a t-7 and it does the same thing. He said he just leaves it as is and it hasn’t been an issue.

I have the same bike and the dealer told me to use semisynthetic 10w-40 and not synthetic and the gearbox is bad and i do not trust him .is it safe to use synthetic?

@BradTheBuilderChannel

2 жыл бұрын

The manual doesn’t specifically say but I’m am certain it’s okay to run full synthetic especially since it’s a 2021. Bad gearbox? That’s news to me. Put in whatever you are comfortable with. I will run full synthetic

@BradTheBuilderChannel

2 жыл бұрын

I just got off the phone with my dealer in the service department and they confirmed running full synthetic is 100% okay

@ikosmidis1

2 жыл бұрын

Ok thanks i will try full synthetic .have nice rides

Great content B-Rad you truly make tutorials simple and straight to the point, keep up the good work man!

Does the oil filter matter much?

@BradTheBuilderChannel

Жыл бұрын

Yeah for sure but certainly doesn’t need to be changed every time you change the oil. You can do every other oil change and be fine.

How do you torque that oil filter to spec? You got a torque filter wrench?😂

@BradTheBuilderChannel

Жыл бұрын

There is an oil filter cup socket the matches the notches in the oil filter which has a 3/8 drive square hole that your torque wrench goes into. Hand tight will Suffice.

What happen to hand tight.😂no torque spanner here

42N.m sounds a lot.....

I'm only using Motul V300, that's eaven after two years clear not black and green like poison.

@BradTheBuilderChannel

2 жыл бұрын

I’ll have to give that a try! Looks like some really good stuff

@rolfgeorg3057

2 жыл бұрын

And by the way, I've got a 2017 Mt07 with a lot of modificationes, complete Ölins suspension,Akra carbon,litium batterie,boost steering bar,small cnc footrests and two finger handles. And of cauce Continental Race Attack soft racing tires.Nice greatings from Andalucia.

What is the part number for the crush washer, i have the same bike but i cant find the crush washer anywhere.

I advise against torqueing that bolt down to 32 ftlbs. You're just going to have alot of ppl crack there oil pans like I did.

@Tembel_Kopek

Жыл бұрын

How much would you?

@yammyking22

Жыл бұрын

@Tembel Köpek 16ft lbs is plenty. I tighten mine without a torque wrench now tho and I've been good. Snug is good enough.

@Tembel_Kopek

Жыл бұрын

@@yammyking22 Thanks. I was wondering, 32 ftlbs seems pretty high for aluminum, but even the manual says 32 ftlbs. I also tighten the plug of my car without a torque wrench, but I've never done it on my MT.

@BigFoofies

Жыл бұрын

There’s a lot of feedback in the forums about this. Going as far as people claiming they spoke to Yamaha and Yamaha admitted 32lbs is too much.

@Tembel_Kopek

Жыл бұрын

@@BigFoofies I torqued mine to 20nm which is about between 15 and 16 ftlbs. Seemed perfectly snug to me, no leakage either.