How to change strut mount AUDI A3 1 (8L1) [TUTORIAL AUTODOC]

Автокөліктер мен көлік құралдары

How to change strut mount / top munt on AUDI A3 1 (8L1) 1.8 Hatchback 1997 [TUTORIAL AUTODOC]
Strut mount on AUDI A3 (8L) (09.1996-05.2003) / AUDI TT Coupe (8N) (10.1998-06.2006) / SEAT Leon I (1M, 1M1) (11.1999-06.2006) / SEAT Toledo II (1M, 1M2) (10.1998-05.2006) / SKODA Octavia I (1U) (09.1996-12.2010) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
🔝 Top brands that produce strut mount: MONROE, STARK, KYB, SACHS, RIDEX
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co.uk/?...
Strut mount: www.autodoc.co.uk/car-parts/s...
Strut mount for AUDI A3 1: www.autodoc.co.uk/car-parts/s...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ kzread.info?s...
🛠️ The tools you need to replace rear strut mount:
- wire brush
- WD-40 spray
- drive socket No. 13
- drive socket No. 18
- flare nut socket
- HEX bit No.H6
- 12-point socket 1-3/16”""
- shock absorber socket
- combination spanner No. 18
- combination spanner No. 21
- ratchet wrench
- torque Wrench
- copper grease
- wheel impact socket № 17
- hydraulic transmission jack
- rubber mallet
- hydraulic strut spring compressor
- wheel chock
- fender cover
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► AUDI car repair tutorial | Step-by-step video guide - • AUDI car repair tutori...
► AUDI A3 1 car repair tutorial - • AUDI A3 (8L1) car repa...
► How to replace air filter on AUDI A3 1 (8L1) - • How to change air filt...
► How to replace rear springs / rear coil springs on AUDI A3 1 (8L1) - • How to change rear spr...
Mobile Shop: m.autodoc.co.uk
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
KZread: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...

Пікірлер: 13

  • @autodocuk
    @autodocuk Жыл бұрын

    ⚠ Attention! This video contains a mistake: 6:56 - the tightening torque is 60 Nm, not 70 Nm. 7:37 - the tightening torque is 20 Nm, not 35 Nm. We're sorry for the inconvenience 🙇‍♂

  • @jasonb1500
    @jasonb15005 жыл бұрын

    Hi what size is the Flare nut socket 22mm thanks.

  • @autodocuk

    @autodocuk

    5 жыл бұрын

    Thank you for your comment! Unfortunately, we do not possess such information. Best Regards, Autodoc Team

  • @BABZ786
    @BABZ786 Жыл бұрын

    Hi for audi a1 strut mount top bolt size 22mm with 7mm allen key??

  • @autodocuk

    @autodocuk

    Жыл бұрын

    It is not possible to answer your question, you can find this information in the technical documentation for the repair of your car.

  • @ryanjdunn
    @ryanjdunn10 ай бұрын

    Good video, but a your captions give different torque settings to whats on the screen. Also a bit of a risky move blasting wd and copper slip so close to pads 😵

  • @autodocuk

    @autodocuk

    10 ай бұрын

    Our videos are for reference only. All routine replacements and values can be found directly in the technical documentation for your vehicle or with the help of a car service.

  • @ahmedmoustafa6829
    @ahmedmoustafa68295 жыл бұрын

    Some explanations will be great

  • @autodocuk

    @autodocuk

    5 жыл бұрын

    Thank you for your feedback! Our videos contain subtitles, by which we tried to describe the whole replacement process. Best regards, Autodoc.

  • @abumusa8748

    @abumusa8748

    4 жыл бұрын

    He skipped out the taking off of the actual top bush on the strut and bearing also you can use a ring spanner on the top nut instead of the fancy socket then not everyone will have also u should never put copper grease of the hub where the wheel goes on as it can stop the alloy wheel from sitting flat. Think you need to get a proper mechanic to do ur videos

  • @Max-lq9bi
    @Max-lq9bi3 жыл бұрын

    music toooo noisy

  • @noel5ilv3rlake
    @noel5ilv3rlake Жыл бұрын

    Typically garage 😂 easy job without taking off anything but you make look difficult and waste time

  • @geogsi88
    @geogsi884 жыл бұрын

    Stupid music. Also no need to take strut out of car

Келесі