It isn't hard, but its labor. This is one of the reasons I went darkside. But on the 250 it's easy, small tires, inexpensive and can be done quickly. Cash me outside
Жүктеу.....
Пікірлер: 21
@Nismopanda72 жыл бұрын
This video help me a bunch!!! Thanks!!!
@captlarry-35253 жыл бұрын
double check the balance mark opposite the tire stem , and rotation arrow before you inflate
@kethvelo4 жыл бұрын
I built up my worn rubber dampers with strips of bicycle tube until the next service opportunity and shipping in replacements , now back to our video~~~~
@ImDamagedBadAtBest3 жыл бұрын
@ the 10:37 mark you put some grease in the sprocket carrier. Did you clean out the existing grease before adding the new grease in there? Is it ok to mix greases?
@TheTwistedMystic
3 жыл бұрын
Should be alright. If you want to get technical about it just wipe off the old grease with a paper towel.
@LL-bg7go3 жыл бұрын
Aren't you supposed to balance it by spinning it on an axle and putting weights ?
@darksorceresszyra9467 Жыл бұрын
Only concern when removing I have is the scratches it's hard to not scratch it that way.
@Zerogokiv26 ай бұрын
Thank you
@motardsquid
6 ай бұрын
Welcome!
@michaelwilliams49743 жыл бұрын
That’s how it’s done
@SubaruB4RSK Жыл бұрын
The tire is not mounted backwards.. look at 9:52 you can see clearly on the left side of the tire the rotation mark
@DieselMerlot
Жыл бұрын
The tread pattern is definitely wrong for a rear tyre, meaning he's more than likely mounted a front tyre onto the rear wheel.
@DieselMerlot2 жыл бұрын
Umm, yeah that was helpful, but that tyre is definitely facing the wrong way.
@SubaruB4RSK
Жыл бұрын
No it's not look at 9:52
@michaelhudson34452 жыл бұрын
Is the tire backwards?
@dntcrapinmiyard3386
2 жыл бұрын
It is mounted backwards
@SubaruB4RSK
Жыл бұрын
No it's not check out 9:52 you can see the rotation arrow.
Пікірлер: 21
This video help me a bunch!!! Thanks!!!
double check the balance mark opposite the tire stem , and rotation arrow before you inflate
I built up my worn rubber dampers with strips of bicycle tube until the next service opportunity and shipping in replacements , now back to our video~~~~
@ the 10:37 mark you put some grease in the sprocket carrier. Did you clean out the existing grease before adding the new grease in there? Is it ok to mix greases?
@TheTwistedMystic
3 жыл бұрын
Should be alright. If you want to get technical about it just wipe off the old grease with a paper towel.
Aren't you supposed to balance it by spinning it on an axle and putting weights ?
Only concern when removing I have is the scratches it's hard to not scratch it that way.
Thank you
@motardsquid
6 ай бұрын
Welcome!
That’s how it’s done
The tire is not mounted backwards.. look at 9:52 you can see clearly on the left side of the tire the rotation mark
@DieselMerlot
Жыл бұрын
The tread pattern is definitely wrong for a rear tyre, meaning he's more than likely mounted a front tyre onto the rear wheel.
Umm, yeah that was helpful, but that tyre is definitely facing the wrong way.
@SubaruB4RSK
Жыл бұрын
No it's not look at 9:52
Is the tire backwards?
@dntcrapinmiyard3386
2 жыл бұрын
It is mounted backwards
@SubaruB4RSK
Жыл бұрын
No it's not check out 9:52 you can see the rotation arrow.
You put the tire on backwards
@SubaruB4RSK
Жыл бұрын
No it's not check out 9:52
How to correctly mount a tire backwards
@SubaruB4RSK
Жыл бұрын
It's not backwards look at 9:52