HOW TO CAULK BASEBOARDS

STOP MAKING A MESS!! Your caulking job will make or break your trim install! Here are some great tips to get super crisp lines on your trim work.
Instagram @vancouver_carpenter

Пікірлер: 1 300

  • @sebowman9122
    @sebowman91225 жыл бұрын

    I've been a painter for 38 years. My hat is off to you. Everything that comes out of mouth in this video is like you've read my thoughts. I always tell my customers that cracks are ugly and lets include caulking for a finished look. And you're on the money with a wet rag and wet finger. You are an excellent teacher and great speaker. Thank you for the videos.

  • @mikespainting291

    @mikespainting291

    5 жыл бұрын

    That corner is unacceptable paint doesn't fill

  • @SeemsFutileNow

    @SeemsFutileNow

    4 жыл бұрын

    A wet rag is bad for Caulk. A damp rag is good. A finger can't tool caulk flush. Year 39 try a 90° shim to tool. Shouldn't have to tell a customer to fill a crack lol.

  • @jurginvon

    @jurginvon

    4 жыл бұрын

    Only one thing. Fill your nail holes before you caulk. You may have to set nails because a nail head not countersunk. Afterwards your trim may have moved and sometimes, so will your caulk line.

  • @SeemsFutileNow

    @SeemsFutileNow

    3 жыл бұрын

    @@mikespainting291 correct because air gets behind a crack filled with paint and WILL CRACK eventually. @Ben you are wrong about paint filling cracks

  • @CherylMacKay11f

    @CherylMacKay11f

    3 жыл бұрын

    Thank you. Super helpful.

  • @mattayapederson7157
    @mattayapederson71574 жыл бұрын

    Thank you for NOT talking about anything but the task at hand. Drives me cray cray when the you tube folks talk about anything and everything before getting to the subject at hand. Your video's are great!

  • @daveadelsohn1260
    @daveadelsohn12603 жыл бұрын

    I am a 50 year veteran cabinet maker but I still learned a few tips from your videos. I respect you and your stile very much. God bless you

  • @duaneafields

    @duaneafields

    3 жыл бұрын

    i am a carpenter too, I got your joke on style..stile. Rails and Stiles for cabinet doors, good one.

  • @symposes
    @symposes5 жыл бұрын

    I think my house must have been built on a friday.

  • @shafiamati

    @shafiamati

    5 жыл бұрын

    symposes funny 60’s house?

  • @symposes

    @symposes

    5 жыл бұрын

    @@shafiamati townhouse built in 86. was a rental for some time before it was flipped and I bought it.

  • @workhardism

    @workhardism

    5 жыл бұрын

    Lol

  • @musicschool4593

    @musicschool4593

    5 жыл бұрын

    lol!!!!!

  • @MR-dl4fv

    @MR-dl4fv

    5 жыл бұрын

    😂😂😂

  • @sketchyskateboardingasmr6531
    @sketchyskateboardingasmr65312 жыл бұрын

    I can't believe I watched all of your skateboard truck review videos when I was deciding on a new pair of trucks and now I've stumbled on your carpentry videos when I need carpentry help lol. The world needs more people like you

  • @musicschool4593
    @musicschool45935 жыл бұрын

    I have been building on and off for 30 years. I have learnt soo many cool little tricks from you. You are also inspiring to watch as you are so engaging and seem passionate about what you do. Awesome vids!

  • @johnmariano47
    @johnmariano474 жыл бұрын

    This is one of the best training in this subject, in less than fifteen minutes showing the ins and outs of this subject. Just showing how you do it the quality way with all the steps necessary to do the best quality job along with all what can and what goes wrong and how to fix it, I appreciate it. You are one heck of a Crafstman and a highly qualified trainer. Sir, thank you!!!!

  • @kc4tlm
    @kc4tlm2 жыл бұрын

    This video is great! Thanks for all the little tips and details! I am a DIY finishing my basement on my own. My appreciation and respect for tradesmen like you has exploded over the last 2 years! Thanks for sharing your thought process and experience, sir.

  • @1mollymom
    @1mollymom3 жыл бұрын

    Thank you so much for this. I’m a newbie and learned a lot. It’s nice to see someone else being unapologetically perfectionist!

  • @jdawg0828
    @jdawg08284 жыл бұрын

    I thought this was worth sharing for non-pros: After years of caulking the houses I've lived in, I started using painter's tape along the trim before I caulk. I leave a very thin space between the trim and the tape to make sure enough caulk gets into the gap behind the trim. The prep takes longer than the caulking does, but I think it's worth it, especially if you don't have white walls like you do, which makes mistakes more obvious. After you're done caulking, you pull off the painter's tape and you have don't have any mess on the walls. Don't wait for the caulk to dry or else you'll start pulling off more caulk than you mean to.

  • @pr3ciousara

    @pr3ciousara

    2 жыл бұрын

    Noob question, but are we supposed to caulk before we paint the trims, or after for a finished look? Please don't crucify me for asking! Thank you

  • @erikkkkkkk914

    @erikkkkkkk914

    2 жыл бұрын

    @@pr3ciousara before paint

  • @badmf107

    @badmf107

    2 жыл бұрын

    Thanks for sharing, highly appreciated.

  • @R0B690

    @R0B690

    2 жыл бұрын

    I do this on every job, gapping the skirting to the floor. If you leave a small gap, and fill it very thinly with gap filler (caulk), the tape comes off after painting and leave a perfect line.

  • @Grejegando

    @Grejegando

    9 ай бұрын

    Thank you. I love your method more and I think it allows those of us with little-to-no experience to make the work look nice and professional.

  • @austinpatrick2682
    @austinpatrick26825 жыл бұрын

    I was fortunate to have an old carpenter show me how to caulk properly my first week on the job. It's sad how many guys have been doing this for 40 years and still suck at it. It really isn't as simple as point and shoot. A lot of guys seem to just take it too lightly. The reality is you can make or break a job with your caulk work.

  • @kosinskiarek

    @kosinskiarek

    5 жыл бұрын

    Correct, too bad I didn't see this video before I applied caulking on my upstairs which I just finished. Ohh well I guess I know for the future or when I'm doing basement! :) Never to late to learn.

  • @nullings

    @nullings

    5 жыл бұрын

    The biggest problem ive seen is crappy tools. Try using a hilti pump. I do all my caulking freehand. (silikone, whatever) Its a matter of applying the correct amount, equally over an area, that way you can just slide youre finger and you are "done" (acrylic caulk is never done, until it has new paint over it)

  • @shawnr771

    @shawnr771

    5 жыл бұрын

    To fix small areas or to remove old sealants try a heat gun. Makes it pliable and you can cut it out easier with a razor knife.

  • @carpentryfirst3048

    @carpentryfirst3048

    5 жыл бұрын

    Im a carpenter and in my experience I can honestly say the reason behind everyone shitty work is lack of "fucks" given. Too many people don't truely care to achieve the best they can and improve on what they do. Seems like it should be natural for people to want to be the best they can be but most, almost everyone I have ever worked with always had a " fuck it" attitude. Like any job though, if you click with the right people, nobody says shit. We all know this to be true. And in sure most people don't even know they reek of "fuck it". But same thing as people with shitty attitudes. How do they not know you can't be cranky to another grown man. How to people not know that we judge each other and how do people not want the best judgment possible from the people around them. The new generation is all about not caring what other people think. Which leads to unchecked shitty behaviour and habits. 100 guys charge x for a job You charge xx and the customer goes with the average lower end quote. Cause how are they to know right. That's why quality of work had gone down so much. My thesis. Lol

  • @robh.4922

    @robh.4922

    5 жыл бұрын

    Lil Stack'n- I totally agree. The way you do one thing is the way you do everything and it carries over into your entire life. Shitty work, shitty life. It’s what most, or many don’t get. When you’re proud of your work, you’re proud of you and there’s no better way to have a great life than to know you’re doing the right thing and truly like yourself. It’s a wonderful peace of mind. You attract more and better customers and better people to be in your life. I usually tell a new customer what others charge. I then tell them, “I’m the best of the best but still charge less than the most expensive guys.” It gets you so much business to deliver that value without gouging the customer.

  • @johnnypenso9574
    @johnnypenso95745 жыл бұрын

    A friend of mine showed me this technique about 20 years ago. The results are simply phenomenal and you can be a little sloppier putting your trim together because the caulking covers up a lot of mistakes. Great video!!

  • @sarahharvey7844
    @sarahharvey78444 жыл бұрын

    I just built a house and am doing a lot of the finish work myself! Gotta love KZread! Before I tackle a project I watch videos on how to do it. Great advice and tips!

  • @satisfyingwhiteboarddrawin4587
    @satisfyingwhiteboarddrawin45874 жыл бұрын

    I’m the one who does ALL the caulking and painting and I must say I’m pretty good at it. But I’ve learn a few things from you. I always cut the caulk hole too big and always got more then what I needed. I can’t wait to do some caulking today. Keep your videos coming.

  • @trishkoch8649
    @trishkoch86495 жыл бұрын

    Thank you for your videos and that you always talk about troubleshooting!! Our house was build on a Friday a hundred years ago, noting is perfect, every wall is a unique and special snowflake, so we are always looking to KZread for solutions. Your channel has been an enormous help as we renovate and update our old wonky house. Thank you!

  • @EnisVoorhees
    @EnisVoorhees2 жыл бұрын

    I'm learning so much here. Your way of casually and clearly demonstrating, describing, and anticipating others' experiences is excellent teaching! Thank you.

  • @ChuckDude61
    @ChuckDude615 жыл бұрын

    I wish I’d found you 6 months ago! And love your video man! Super relaxed and clear and fun 👌👌

  • @jagros4672
    @jagros46725 жыл бұрын

    Great video and you make it look easy to get a professional finish. Im retired now but had many years experience applying silicone sealant in the aerospace industry where you can't use a finger or any other implement - the sealant must be applied straight from the tip in its final form. An angled cut is used so that the trailing edge of the cut gives the scraping action with the gun held almost at right angles to the joint so that the sealant is forced into the joint then shaped all in one pass. Much practice makes perfect. For painters caulk your method is fine, however sometimes I use an old credit card instead of a putty knife as it can scrape both face surfaces clean without marking and gives a constant radius. I always use paintable siliconised calk as it is not so likely to crack if there is any movement in the joint later. Never use making tape to edge the calk, especially with silicone, as it leaves a ridge the same thickness of the tape, whereas a finger (or shaping tool) feathers the edge so its invisible.

  • @leyfolkner3977

    @leyfolkner3977

    5 жыл бұрын

    Much thanks for your experience tips!

  • @lexboegen

    @lexboegen

    5 жыл бұрын

    Great info--thanks! I was a little leary of the putty knife because I always take a file and break the sharp corners on them, but I've been saving old credit cards for years to use as glue spreaders. Now I have another use for them.

  • @grational

    @grational

    5 жыл бұрын

    He displays very poor technique with consistent poor outcome by not holding the tube in line with the flow of the draw. Each time he holds it to the side or otherwise he gets irregular flow. This can be done but only with skilled and swift, typically fast heavier pressure and product flow. You are right, you should be able to place a bead down with the option of pressing it it by finger if you align the tip, cut it properly and distribute it at the right flow. It requires the correct body position and a mechanical movment and if broken into steps is very fast and economical. Paint is NEVER an filler. Also, the rag should be folded in 1/4s so it can be used cleanly as you go on. My 2 cents.

  • @pterafirma

    @pterafirma

    5 жыл бұрын

    Jagros, the methodology you describe is similar to that of stone cladding. Joints are sealed with silicone, and it has to be done skillfully in one pass, without the mess of fingers and smearing it into place. Also, properly installed backer rod is what forces the caulk bead into an hourglass cross-sectional shape, so it bonds to the adjacent stone panels, rather than pulling away.

  • @edwardschmitt5710

    @edwardschmitt5710

    5 жыл бұрын

    I tape both sides of the joint in bathtubs, wipe once right away with my finger (s) quickly remove the tape and wipe again-perfect amount of caulk and no tape ridge left. Caulk can have air bubbles-particularly the large tubes, when he showed how to flatten the large "bloops" ...that doesn't work in a tub, you need as much as possible off the tub and tile.

  • @langent4653
    @langent46534 жыл бұрын

    You ARE one of the best anywhere at teaching handyman and professional skills. Your to the point, explain things in common terms, not driven by product placements or metrics ;) and a joy to watch. Please keep up the great videos and stay safe.

  • @deckgun31
    @deckgun315 жыл бұрын

    This was quick, informative and lightly peppered with some humor. A GREAT video for any weekend handyman. Thanks. This was extremely helpful!

  • @TheGuitarShawn
    @TheGuitarShawn3 жыл бұрын

    Man I’m so stoked you have this channel too. Getting a good dose of Ben.

  • @seannardella2639
    @seannardella26393 жыл бұрын

    You have basically rebuilt my house for me with this channel. I watch your videos, then black out and when I come to, things are done and they look great.

  • @infotechsailor

    @infotechsailor

    3 жыл бұрын

    Drinking helps everyday feel like a Friday

  • @BDistoshortforahandle
    @BDistoshortforahandle4 жыл бұрын

    Instead of learning about wheels, trucks, and decks, here I am learning from you about home improvements as I finish up the new bedroom in our house. Killing it Ben! Thanks for all you do on YT. Cheers

  • @meangreen7389
    @meangreen73895 жыл бұрын

    Ok, so I took your advise...made the little adjustments...what a huge difference! Thank you!

  • @veemercer1698
    @veemercer16985 жыл бұрын

    Love it - thank you for posting this. Excellent help to me for when I redo the Friday job done by my professional builder.

  • @kurtgainz
    @kurtgainz5 жыл бұрын

    This is my favorite channel for carpentry tips.

  • @LightGesture

    @LightGesture

    4 жыл бұрын

    You've never watched finish carpentry tv,I can tell. This guy's work looks amateur. I don't know why I even watched this. Maybe doubted myself for a second, but dang... He caulks nail holes and miters.. yuck. Doesn't cope or use a real hole filler that doesn't shrink... Don't watch a diyer turned tradesman. Watch a tradesman.

  • @SanderOpdam
    @SanderOpdam5 жыл бұрын

    I’m so happy that I saw your solution for fixing large gaps on window trims. I got a similar thing happening with door frames and I’m looking forward to fixing them cleanly like you did!

  • @mikem.6765
    @mikem.67653 жыл бұрын

    I've only done a couple drywall jobs but your videos helped me do a surprise job for my best friend and it's turned out to be the best one ever! Thank you for the advice and video you make!

  • @tonythomas951
    @tonythomas9515 жыл бұрын

    OK this is the second vid of yours that Ive watched and I'm impressed again. Youre good.

  • @reidrepairs5837
    @reidrepairs58375 жыл бұрын

    Watched your video just before doing two baseboard jobs. One of the most helpful videos ever. Your technique is amazing. Maybe in a few years I'll be able to do it as well as you! But I doubt it. But thanks for the helpful tips.

  • @tcooker67
    @tcooker674 жыл бұрын

    Wow, great video! You're a good speaker, a good teacher, and a good caulker! Well done.

  • @bmwflyfisher
    @bmwflyfisher5 жыл бұрын

    VC! Great video. My house was definitely built on Mon to Weds. I removed the quarter-round to redo the wood floors. Your video was OUTSTANDING after reinstalling the round! It took one 10' stretch with 2 corners, and then I was putting caulk down like a pro: Fast, and done! Thanks for your video, and the tips and tricks to this!

  • @joenalaska
    @joenalaska5 жыл бұрын

    Well I feel dumb. Came here all ready to make fun of you for a 14 minute video on caulking trim (how much time did you waste?!), but after watching it you were right on. It wasn't full of filler, it was just very detailed. It's amazing how much you forget you are doing after a couple decades, how many details are just automatic "how I do it" but to someone new to caulking are not at all self evident and greatly effect the final result and frustration during. Great video!

  • @vancouvercarpenter

    @vancouvercarpenter

    5 жыл бұрын

    Thank you! It seems pretty intuitive I agree but if it were really so easy there wouldn't be so many brutal caulking jobs.

  • @rickduque5799

    @rickduque5799

    5 жыл бұрын

    So important to keep an open mind and willing to improve on things that "you've always done". You never know what you'll learn !

  • @jimbates3837

    @jimbates3837

    4 жыл бұрын

    ... but that's the way dad always did it. Oh that's right, Dad was a hack

  • @MP-yz6sb
    @MP-yz6sb4 жыл бұрын

    This was a great video. Caulking has always been one of my nemesis.

  • @seriouslyreally5413
    @seriouslyreally54135 жыл бұрын

    Your videos are so helpful! Thanks! I can see what I'm doing wrong in covering screws, filling wider gaps and the pressure and angle changes in toweling on mud to feather with the least amount of blistering and follow up sanding. I just have a small repairs from time to time and mudding is the skill you pay a professional for; yet small repairs are the calls you'll least likely get a guy to come out to do so I'm glad to learn it.

  • @chaplainand1
    @chaplainand13 жыл бұрын

    Spludge. What a great word. Says so much with so little need for explanation. Folks in the trades have an entire vernacular separate from the rest of the world. I like that. Something you might try sometime. I was working in a new house. The carpet guy came. I said Hey and asked, How ya doin? His response, John, was I am not on fire and no one is shooting at me. I think I'm ok. Perspective. It's helpful to have, otherwise, life is just one spludge after another. And, I appreciate your sense of humor. I found that doing remodel work, if you have no sense of humor or acceptance for things the way they are, work can really suck. Sometimes, when I discover I have really made a mess of things or a costly mistake (to me), I just laugh, shake my head, and do what needs to be done to make it right. Thanks for the smiles and for making videos that I like and from which I have learned a lot already.

  • @ronmortimer252
    @ronmortimer2525 жыл бұрын

    When cabinet makers assemble all their pre-cut pieces into a project it's called a glue up. When builders/carpenters/handymen try preparing rooms for painting it's usually just a caulk up. 👦

  • @harrisb43
    @harrisb434 жыл бұрын

    I did a 16 x 16 ceiling last year, only after figuring out the feathering techniques you had described in a few of your videos. There's a butt joint between two sheets just four feet in from a window; not a suggestion of a shadow even with daylight only. Real proud. Thanks very much. Comment on caulking technique: some tubes used to have instructions recommending "pushing" the tube along the joint rather than "pulling". I find this does two things: when you have the speed and feed coordinated, it pushes the caulk into the joint and the trailing edge of the plastic nozzle forms the bead neatly. May still need to be tooled but minimally. I use a putty knife too, but also have a double-ended tool having a square putty-type blade at one end, and a rounded point at the other. Works great on inside crown joints. Thanks again for great videos.

  • @amyjeanbelk7561

    @amyjeanbelk7561

    6 ай бұрын

    Pushing explanation is helpful

  • @motodrang4287
    @motodrang42875 жыл бұрын

    You have some of the best drywall/trim videos buddy! Just did my inside corner taping and mudding and it worked first go after watching your stuff.

  • @patriciahoffman808
    @patriciahoffman808 Жыл бұрын

    Thank you for sharing your expertise and craftsmanship. You are a natural teacher!

  • @heatherhumphrey4600
    @heatherhumphrey46004 жыл бұрын

    Thank you so much for this video. We just bought a brand new house, and when it came time for our walk through I was asking about this non stop because it was so messy and the paint overtop was horrible. They were supposed to fix it, but of course they half assed it yet again. So, atleast I know how to do it now, so I can do it myself. Thanks again

  • @Faustustopheles
    @Faustustopheles5 жыл бұрын

    Once again, thank you very much. I'm getting ready to finish a room and this helps a ton. I've got the trim in but I still need to caulk.

  • @chrisp.nugs1643

    @chrisp.nugs1643

    4 жыл бұрын

    I have a ton of CAULK

  • @jenjones6284
    @jenjones62843 жыл бұрын

    Not even 60 seconds in and you already made me smile. Love your videos. :)

  • @bethcrispin2185
    @bethcrispin218510 ай бұрын

    Thank you for your helpful and concise videos. I appreciate all the little tips like using an old paintbrush to clean out corners (brilliant). I also really appreciate that you remind us that everyone makes mistakes. Your videos are my go to for any DIY!

  • @GarlandLym
    @GarlandLym4 жыл бұрын

    Another Fantastic Video. I can't state it enough how grateful I am that you take the time to explain the 'why' and 'what to use' and 'why you chose that tool or material'. Thank you for imparting your knowledge via youtube

  • @macoeur1122
    @macoeur11224 жыл бұрын

    Thank you, thank you, thank you! Just knowing there are still people who care about doing a good job is enough for all of those thank yous....And three more for the tips in the video!

  • @miken389
    @miken3895 жыл бұрын

    Hadn't done any DIY plastering for 20 yrs, so I needed some reminders to warm up. There are some good KZread teachers and some really iffy ones. Love your work, clearly explained detail, a bit basic at times but I can skip ahead if I need to and sometimes I do need a reminder about the basics. Just finished my practice 'line-the-garage" job in prep for ceiling installs in my gutted apartment. Really happy with the (almost) finished job that relied on your tips and advice, so thankyou. Have a great Christmas.

  • @ljones98391
    @ljones983914 жыл бұрын

    Very helpful. The close up shots help along with the detailed explanations and instructions. Thank you.

  • @jimjim2822
    @jimjim28222 жыл бұрын

    Awesome tutorial - thank you. I’m guilty of cutting too much off the tip of the tube then wondering why I’ve got way too much caulk coming out 🤪. I learned lots from you👍

  • @jms4406
    @jms44065 жыл бұрын

    Round the caulking tube tip and Damp wash cloth over the finger can help you too. I was a high end house and commercial painter for 10 years.

  • @SansAziza

    @SansAziza

    5 жыл бұрын

    I just ran out and bought some caulk after reading this comment. The wet towel over the finger pushes the caulk into the cracks, smooths it out AND cleans up behind itself in a single stroke. Well played, sir.

  • @mansardmanor3869

    @mansardmanor3869

    4 жыл бұрын

    That's how I do it too, I change paper towels for damp rag. Wash of and reuse all day.

  • @brian.7966

    @brian.7966

    4 жыл бұрын

    high-end painter mmmm does that mean you worked off a ladder.

  • @lautzemain8907

    @lautzemain8907

    4 жыл бұрын

    @@brian.7966 enough with the jokes already

  • @blairhunt1424

    @blairhunt1424

    4 жыл бұрын

    What's a high end painter?? You're either a painter or you're not!

  • @jrbpit1
    @jrbpit14 жыл бұрын

    Great video. Watched it and because of your excellent teaching style and tips, made my trim work turn out much, much better. Great job and thanks for doing the video!!!

  • @wesrobinson7366
    @wesrobinson73664 жыл бұрын

    This is awesome. I have struggled with caulking as never knew how to do it right . This gives me a lot more confidence and is so well explained. At least the crappy caulk I did so far is in the garage.

  • @funkydankspliff
    @funkydankspliff5 жыл бұрын

    Woah I just came looking for how to caulk a baseboard and you’re the dude who also does the skate vids, nice!! Just bought my first house and doing some maintainance so this is really helpful bro

  • @peterhunter1990
    @peterhunter19905 жыл бұрын

    This was perfect as I have some Friday mouldings waiting for me. Damn you Monday’s..... but on a lighter note I’ve managed to avoid any caulk jokes in my reply. Yeah me! Awesome video as always!

  • @TaraFinlay
    @TaraFinlay5 ай бұрын

    I watched this video a few weeks ago and followed your tips. Finally, I caulked every single seam in the house I just bought, properly and with no stress. Painting now and it looks great. Thank you so much!

  • @kyleallen1858

    @kyleallen1858

    4 ай бұрын

    You’re welcome boo thang

  • @rebootukology1014
    @rebootukology10145 жыл бұрын

    Great instruction, wish I’d had that 25 years of over caulking! Good news I’m doing it again and will use this info. Thank you

  • @proverbs2life
    @proverbs2life5 жыл бұрын

    I have 90 yrs experience and you're doing great!

  • @Jonnynnoj

    @Jonnynnoj

    4 жыл бұрын

    Wow, how old are you?

  • @willie9397

    @willie9397

    4 жыл бұрын

    @@Jonnynnoj thats what i was thinking

  • @casenumber8799
    @casenumber87993 жыл бұрын

    It's like watching Michelangelo make a fresco Only a master can make it look easy Dude, please accept my appreciation

  • @charleslamfookon5460
    @charleslamfookon54603 жыл бұрын

    Great tips and advice! I’m a noob who had never done this before and the results look great. Thanks for being you!

  • @IppiopaidFEEDBACK
    @IppiopaidFEEDBACK5 жыл бұрын

    Another good video. You have the gift for explaining things. Plus your mechanical skills are in line with your explanation.

  • @craigspakowski7398
    @craigspakowski73985 жыл бұрын

    This was TOTALLY worth my subscription! Thank you!

  • @christophersibilia8880
    @christophersibilia88804 жыл бұрын

    Man i watched this video cause honestly i suck at caulking. Finished the bottom floor today and it looks great. First video i found on youtube that helped me. Keep it up your articulate explanation made the job easy. Thanks bro.

  • @micdrop-jh3pf
    @micdrop-jh3pf4 жыл бұрын

    That putty knife technique is extremely helpful. I've been painting and caulking a while now and there's always more to learn. Subscribed!

  • @333donutboy
    @333donutboy5 жыл бұрын

    Great video. The close ups really help. I wish I had put off my bedroom remodel until after you posted all your videos. 👍👍👍👍

  • @benmarkus3675
    @benmarkus36754 жыл бұрын

    FRIDAY TRIM! I love it.

  • @diybyanovice6845
    @diybyanovice68454 жыл бұрын

    I needed to see this, just starting to prep for painting and thought I was going to try and use some sort of plaster/filler product for the gaps but not anymore! This looks much easier.

  • @sallyyouhoo2710
    @sallyyouhoo27103 жыл бұрын

    This is the best video on this subject that I have listen to and explains caulking perfectly

  • @ooparamountoo
    @ooparamountoo4 жыл бұрын

    The real MVP. Clear and well explained. Thank you sir

  • @justmike57
    @justmike575 жыл бұрын

    So that's what my problem was. I cut the tube hole to big. Thanks for the tips.

  • @austinpatrick2682

    @austinpatrick2682

    5 жыл бұрын

    Would that be a tip tip? Lol...

  • @workhardism

    @workhardism

    5 жыл бұрын

    According to the video, if your a liberal it's pronounced cock tip! LoL. Thanks but no thanks, I'll stay conservative.

  • @austinpatrick2682

    @austinpatrick2682

    5 жыл бұрын

    @@workhardism I'm with you lol. It took me a while to learn to say caulk, I'm not going to unlearn it now anyway!

  • @attitudeadjusted9027

    @attitudeadjusted9027

    5 жыл бұрын

    Just the tip!

  • @HouseFairyDIY

    @HouseFairyDIY

    4 жыл бұрын

    I suppose the tube hole should correspond with the size of the gap.

  • @patrickcowan8701
    @patrickcowan87015 жыл бұрын

    Been in the business forty plus years everything from monuments to house boat's, commercial, residential and everything in between but I can still learn a trick or two and I have on your channel especially drywall getting good at it now but still hate it but the customers want a do it all, concrete, plumbing, framing, finish carpentry, elctrical are my favorites but a good lesson for us older folks not to ignore the young people.

  • @olaveti
    @olaveti3 жыл бұрын

    Great video bud. Caulking has been my nemesis for years. This explains what I've been doing wrong. Thank you!

  • @chrisweist8995
    @chrisweist89952 жыл бұрын

    Thank you for this video. I have never caulked before and this was very good for beginners. You explained everything so that it was understandable. You explained why you were doing what you did too. Thank you!!

  • @zeebs28
    @zeebs284 жыл бұрын

    Thanks for all the tips and details! Love this video as a first time home owner trying to do some simple diys around the house during quarantine!

  • @MikeSaner
    @MikeSaner5 жыл бұрын

    Good grief I've been cutting the tubes WAY too big.

  • @TheSeancassady

    @TheSeancassady

    5 жыл бұрын

    Me too, now hopefully I'll have less cleaning up to do and will get more out of each tube.

  • @handymanjourney

    @handymanjourney

    5 жыл бұрын

    Me too! I just realized this thanks to this video!

  • @HouseFairyDIY

    @HouseFairyDIY

    4 жыл бұрын

    Me too.

  • @dennishassler605

    @dennishassler605

    4 жыл бұрын

    Depends on the job you are doing - the floor trim doesn't need much product.

  • @thedude5295

    @thedude5295

    4 жыл бұрын

    @Jimmy Jazz I just celebrated my 25th rookie season.

  • @glenndespres5317
    @glenndespres53172 жыл бұрын

    This guy is the best. I always learn something new about things I’ve been doing for years.

  • @jimyeats
    @jimyeats3 жыл бұрын

    Most helpful video on caulking tips and tricks. Really appreciated.

  • @MustardMade
    @MustardMade5 жыл бұрын

    DO YOUR BEST, AND CAULK THE REST

  • @Brian-xu9di

    @Brian-xu9di

    4 жыл бұрын

    Hack.

  • @jonathan1613

    @jonathan1613

    4 жыл бұрын

    Yeet!

  • @chrisp.nugs1643

    @chrisp.nugs1643

    4 жыл бұрын

    Believe in the caulk

  • @HAL-dm1eh

    @HAL-dm1eh

    4 жыл бұрын

    As a painter, our saying was PUT SOME CAULKING IN IT. Baseboard is warped? PUT SOME CAULKING IN IT. Hole in the wall? PUT SOME CAULKING IN IT. Girlfriend got pregnant? PUT SOME CAULKING IN IT.

  • @chrisp.nugs1643

    @chrisp.nugs1643

    4 жыл бұрын

    @@HAL-dm1eh just give it a big tube of caulk

  • @paulsallee4889
    @paulsallee48895 жыл бұрын

    If I get a large glob of caulk, I start with my thumb because its larger, and work down through my fingers getting smaller in size. Works for me.

  • @aussie8114

    @aussie8114

    4 жыл бұрын

    That’s why we have 5 different size fingers

  • @eubanksstephen8027
    @eubanksstephen8027 Жыл бұрын

    Dude!, watch ur video 3 times, started caulking my baseboards, and it was friggin easy, KEEP hand wet! My wife said it was a pro job !! thank u

  • @Cosette336
    @Cosette3363 жыл бұрын

    Great tips. I’ve made a lot of the mistakes you showed. I think your techniques will really help me get perfectly caulked baseboards.

  • @robg6984
    @robg69843 жыл бұрын

    Been cutting my tunes too big, this actually makes me want to go caulk something

  • @alanlicht7633
    @alanlicht76335 жыл бұрын

    I have seen several videos on caulking yet like other topics you were once again able to show additional tips with good camera shots that others didn't provide. On the window casing, the left side appeared scribed and the angle cut moved further up to match the bottom piece. A video on your technique for that would be awesome. Oh, and it wouldn't be about drywall finishing!! Heh!

  • @goldbobak7416
    @goldbobak74164 жыл бұрын

    You are the best teacher. You are making great job. Respect. Greetings from Poland!

  • @literalsunset88
    @literalsunset883 жыл бұрын

    I feel like I have a much better chance of not messing up when I caulk my kitchen tomorrow. Thank you so much for making this video

  • @jkc224u
    @jkc224u3 жыл бұрын

    I have always cut the hole too big 🤦🏼‍♀️ glad I decided to watch this before caulking my baseboards

  • @luckyvet
    @luckyvet5 жыл бұрын

    I've applied miles and miles of caulking over the years and this method is perfect. Nothing cleans up a shoddy carpentry job better which is why I consider caulk the most important finishing detail. A good start for beginners is DAP hand-held squeezable tubes of waterbase gloss white. About 3 bucks at any local building store.

  • @Brian-xu9di

    @Brian-xu9di

    4 жыл бұрын

    Hack.

  • @priayief
    @priayief5 жыл бұрын

    Love your videos and find them helpful. Thanks for that. I'm not very good at caulking although over the (many) years I've improved (as a DIY guy). I have a relatively small caulking project (trim on floor, around a window and a door). I liked your suggestions BUT ... I just tried cutting a small, 1/4 inch hole in the tip of some Alex Plus Latex Caulk (looks like the same stuff you're using as a demonstration0. As you indicated, the "piercer" on the gun was too think to pass through the hole. So, I put it in my caulking gun and squeezed the trigger. The caulking escaped through the rear of the caulking tube. I removed the tube from the gun, cleaned up the mess then found some small gauge wire that would fit through the smaller hole. That worked. Regardless of the initial messy problem, I found the smaller hole definitely makes caulking much easier. Thanks again.

  • @06katb
    @06katb Жыл бұрын

    You have some of the most helpful videos that I’ve come across. Thank you!!

  • @PNW_Sportbike_Life
    @PNW_Sportbike_Life4 жыл бұрын

    When I caulk I need 3 buckets of water and 50 rags.

  • @eddyhdz1

    @eddyhdz1

    3 жыл бұрын

    Same 🤣🤣

  • @matthewbeer2405

    @matthewbeer2405

    3 жыл бұрын

    I just run the hose on to my head the whole time im doing it.

  • @MellowMediaDesign
    @MellowMediaDesign3 жыл бұрын

    I'm not sure how you ended up in my feed but damnit, the Friday trim comment won me.

  • @CerealFork27
    @CerealFork27 Жыл бұрын

    I'm about 1 month into an apartment maintenance job, thank you so much for your great video. Definitely feel more confident about caulking

  • @rodterrell304
    @rodterrell3044 жыл бұрын

    I like the sound effects for the bad caulking job. Great job sir.

  • @porschadominguez8262
    @porschadominguez82625 жыл бұрын

    I learned something, thanks. but I just normally use a sponge. I know it can be messy sometimes but it seems to always balance or should I say level the caulking out to a smooth surface. I really enjoyed the video is easy to watch not a lot of crazy music in the background or a lot of Animation just straight to the point a normal speed for person who is wanting to learn a new approach just something they may think they have already mastered. Thank you

  • @workhardism

    @workhardism

    5 жыл бұрын

    Your cute :)

  • @davegordon6943

    @davegordon6943

    5 жыл бұрын

    Called feathering

  • @fakenews591
    @fakenews5915 жыл бұрын

    My finished leaves homeowner speechless I let my caulking do the talkin 😉.... Carpenters do their best and Painters caulk the rest....

  • @rochelleraven4923
    @rochelleraven49233 жыл бұрын

    Thank you for the tip about start by moving in the middle of a bead! I struggle with caulking. Really appreciate this video!

  • @jamieelliott2703
    @jamieelliott27032 жыл бұрын

    I watched half a dozen videos and kept getting a poor result until I watched this. Much better tips and instructions, especially on the tooling. Thank you very much!

  • @stargateproductions
    @stargateproductions5 жыл бұрын

    I like working with a sponge and a 5L bucket of water. As a Finisher/Painter by trade this is a pretty good video on caulking. A few points I like to add on to. First caulk isn't a very good filler, gaps larger than 1/8" need a backing material like wooden shims or spray foam. After years of cutting in, I find it best to not caulk the tops of the baseboard, I instead use a high quality washable paint-able kitchen and bath caulk on top after my last coat of wall paint has cured. I like quick dry Alex Plus that sets up in 20 mins or less, same life span as the one featured in your video. I think working methodically is important too. If you make a mistake, use your rag or sponge, wipe it down, its washable until it has cured.

  • @craigcode7103

    @craigcode7103

    5 жыл бұрын

    Do you not find that the unpainted caulk turns yellow over time?

  • @RyDoC21
    @RyDoC215 жыл бұрын

    I would recommend a tradesman of your caliber to always use the Shermax caulking you were using in the beginning. It is much more flexible, which is important especially in big gaps like you showed on the door casing. Also, it is the only caulking you should use on crown. There's a reason it costs more; it is significantly better, and the cost difference is only about $1-$2 per tube. It's worse the piece of mind to never have call backs from your caulk job failing.

  • @robbynv9900
    @robbynv99004 жыл бұрын

    Great informative video. I like how you explained the process and the diffrent types of caulk. Adding this to my saved repair jobs library.

  • @jbradleymeagher6426
    @jbradleymeagher64262 жыл бұрын

    Just redid all my floors and baseboard. This video was very helpful. Thanks for posting.