Thank you for the lecture. I would love a video on bar bending schedule. Explain the concepts and explaining more on bar shapes

Great training

Thank you for the video❤, however, how do we estimate for overlap

Kindly elaborate more on main bars and distribution bars as if there's a contradiction

Thanks for your content. I have plot size 30*60 and from the front I have left open space of 6' 3" how much steel I need could you please help.

How to read drawing of slab where extra bar also present

How do you calculate for bar spacing and diameter

Super TQ very nice 👍👍👍

Slab making steel is remaining beam to joint?

Thank you

Thank You

Shouldn't we calculate for the cranked as well as the development length, and extra for bends of the bar, as well as subtracting the covers?

@chigozieobinegbo841

Жыл бұрын

The development length, extra bends and crank lengths should be put in consideration including subtracting for Concrete cover

Sir double jaal k lye??

main bar should be placed in short distance or long distance ?

@mesafinttseganeh-oz2mz

5 ай бұрын

main bar can be placed in shorted diraction and distributed bar can be placed in long diraction!

12x12... How Did U Get That? Did U Use A 12mm Steel Bar As Ur Example?

@hamidawan6313

7 ай бұрын

yess

What if diameter of main bar and distribution bar are different. How we can calculate?

@jeelanpasha246

Ай бұрын

Consider the respective diameters of the bar in the formula to get the weightage of the bar in kgs Just divide by 1000 to order in tonns the different dia of steel (dia wise)

In Pakistan, we have readings in feet, bar size in #3, #4 etc, please try to make a video in these units for better understanding.

@samuelmuturi297

Жыл бұрын

Just do conversions

@hamidawan6313

7 ай бұрын

Its 3 and 4 sotarr

D²/162 ?? Where do we get this?

@khamisibro2106

11 ай бұрын

That was my question too

Dear sir where is the Anchor length...Ld

HIGh level of Major bridge slabs BBS make a video

Ok then let's tell we have to keep the bar to bar lapping so we have to add lapping length bar weight also know then how?

Ulata krke rakha hai.. M.B length 2.8 hai.... To dives 6.5/0.15 kiya hai

Salam mualaikum ya jamil muhandis

This is not correct. The length of bars should include splicing.

I think you made a mistake when you calculate main bar & distribution bar i.e 6.5/0.15+1 = 44.33, 2.8/0.15+1 = 19.66, 2.8*19.66 = 55.05, 6.5*44.33 = 288.2 total = 343.25

Sir double jaal k lye??

Sir double jaal k lye??