I've never felt this anxious for a youtube video series in all of my life!

It is the most educational video I have ever watched over the last five years. I am so beyond impressed!

DUDE!! BEST VIDEO ON KZread! I HAVE ALWAYS WANTED TO DO THIS! GONNA WATCH THE REST OF THE SERIES AND THEN MOVE TO THE ESCS!!!

Excited for this series. Really hope you dig into the datasheets for eveyrthing in the future videos, would be really nice to see the WHY for every capacitor/resistor/etc.

@TerryDavisMedia

Жыл бұрын

@@arloblaze9844 yup, been stroking the chicken myself since birth :)

One of the best Playlist I've came across in a while. Definitely will be doing this design. Thanks man!

Amazing project dronemesh! Like the idea of making a kit because many people don't have all the spare components that go on the pcb. Can't wait for the next videos of this series! I learn a lot, thank you

Just putting this out there - the D+ and D- on the USB are not TX and RX. They are differential pair signaling, where instead of sending a HIGH or LOW on one trace to indicate a 1 or a 0, you send opposite signals on the D+ and D-, and the microcontroller uses the transitions to determine if a 1 or 0 was received. This practice is done because it is much less susceptible to noise and enables high speed communication.

It is very cool to learn what each of these components control and how they work together😊👍🏻

This is really great! I have been quite longing to bulid my very own flight controller and you just jumped right in. Will dive deep into your vids. Thanks!

Stumbled upon this video looking for some answers and you knocked it out of the park. Awesome video man!

This is great stuff. This project provides an opportunity to create a design superior in every way (performance & components) to anything on the market because salability and profit are not part of the equation. I hope that's how the project evolves into the "ultimate" design. I'm learning more about electronics than ever before. Keep up the great work!

Really excited to watch all the parts of this series!

your channel is awesome! making builders into designers and creators!

Really great video. I actually want to build one myself. Given that i have minimal background in electronics this video is really supportive.

Fantastic start for the playlist, dude! Thanks a lot for all the explanations! 😃

I've been thinking about doing this for a while now. I think this is my push to open up easy eda, and see what I can come up with lol.

LEDs are suicidal is what made me subscribe. I know totally nothing about electronics, you made me want to learn more. I wish I had a teacher like you about 20 years ago when Internet was still crawling.

What a eye opening video!! I never knew i could start knowing how this all works.... But I do now! thanks a lot bro I'm getting smarter each day

A DIY F4 and F7 kit would be a great idea. I would buy!

@WildCaptures

5 жыл бұрын

Bruno GP I second that✌️

@MrMarcosyMrsLaura

5 жыл бұрын

Me too👆🏼

Just became a patron! Just might have to up my electronics game... Thanks for the inspiration!

Once in a while you stumble on a jewel of a video. This is one of those video gems I used many MCU's and wanted to try the stm32 ones. ordered a nucleo develepment board etc. this would be a sweet first project with stm32 mcu's thank god I googled AT7456e (osd overlay IC) and this video showed up. Subscribed an will watch the other videos, thank you my friend!

This is just something I wanted. It's impressive how knowledgeable you are helping out the community helping out hobbyist like me to get deeper into hobby. I'm truly thankful for that. I just had few questions about the software which is used to sketch these circuit. What are these programs called?

Knowing this is worth gold. Keep it up !

Brilliant video. Just what I was looking for. Many thanks 🙏

This is what I was looking for dope content sir

very interesting and informative, the best video i have ever seen related to drones.

Absolutely great series! Thanks!

awesome bro, this stuff will help me a lot w my learning curve in engineering. thanks!!

Your teachings are so great 🔥🔥

What a fantastic video! Thanks so much for putting this together!

Im sure i will never build a flight controler but nonetheless this is still very interesting and super easy to follow, Thanks drone mesh !

Wow this was such an amazing video im so excited to watch the next one Learned so much through this video thanks man

Nice work ! I was making my own FC and I came on your video. I will make my based on your work but the layout will be different ! Keep up the good work !

@atnosfpv9749

5 жыл бұрын

Tiens tu est là toi :D

great video, maybe you can design a receiver (from a chip) and teach us how to do that. I think a flysky 2.4ghz with telemetry and diversty would be great, there isnt flysky reciver with this specification.

diy kits would be great. think you are doing to teach are great too.

The 0.1µF and 1µF caps on the VDD pin of the gyro should be in parallel to gulp up different frequencys of noise/ripple having them in series will give you a higher voltage rating but less capacitance overall. But still a great video :D

thanks for providing basic knowledge about the flight controller

Excellent video...so good ....really useful...thanks so much!

Nice!the last week i saw a video about this.I cant remember if is in your channel but thanks a lot to upload this.🙌🤙

I love where this is going!

Fantastic. Perfect for my level of expertise.

very interesting, the best series i have ever seen in. keep it up

Awesome, Lot to learn on this topic, started following your channel ! could you please share what schematics drawing and PCB design software is being used in this project work ?

Thanks for uploading this

Dude you rock! I would love to get a diy kit.

Great video! I'd like to know about if the flight controllers on the market can be loaded with diy firmware? And where should I learn more about it? I made my own arduino FC multirotor with all codes and algorithms started from scratch. If I can use those FCs it'd be nice.

Wow, this video is awesome!

It's a very nice work, congratulations. Are there any alternatives that can be used instead of mpu600?

Thank you for sharing this with us. What is the LED in Pin 14 of the MCU for ? there is no third LED on the schematic. I am not sure if you mentioned where to put the GPS? The pins can be either labels or ports , are the UARTs, the SBUS, SDA/SCL pads ports or net labels ?

Yipppee !! i always wanted to know how flight controllers are made and how do they run , what calculataions and software are they running.

I've always been interested in this kinda thing

He explained in detail what a gyroscope is despite everyone knows what it is and all he said about the resonator is that it's important

This is golden! Thank you!

awesome video. im going to watch the everything you got on this.. im a subscriber now so there!! lol thanks bro. oh ya i got my note book out writing all the good stuff you have given out i got 2 pages so far.. steve .H drone footage canada here

DIY kits sound like a good idea

amazing work)

I really admire the work you put into this. Just curious, what is the purpose of the voltage divider on PC5?

THANKS BRO , THIS MAKES MORE SENSE NOW

that's great tutorial! Nice work.

This is frakin awsome. Thanks for all the details. Need to lay off the caffeine to build this ;-) and I definately need those books of chips.

@DroneMesh

5 жыл бұрын

Caffeine is what made this project and every video you see XD lool.. I turn caffeine into projects.

@SOLARFPV

5 жыл бұрын

Drone Mesh - LOL. Man I want to learn to do what you do! Searching for a practice atm. Electronics technician = me in the near future hopefully.

Good Work...

Great project DroneMesh. I assume that you know that your website links are dead aside from the forum one ?

Ordered boards yesterday. Winter project!!!

@DroneMesh

5 жыл бұрын

Join my forum I will be there for the project and project updates and will release all info there also and if help is needed

This info is great, DM!

good job bro

Very interesting..keep uploading

Hi. Terrific video! Could you please tell me what that design program is that you're using?

Very good very nice video,, I have a question I have a xk x130 drone it use 1S lipo can I put 2s for more power but how can I know without fried all the system please help if you can tell me please thank you...!!!!

Great video, but why did you connect capacitors C13_G and C6_G in series, and not in parallel ? Doing so, they are equivalent to only 0.09 uF, and you do not have the benefit of filtering out more frequencies in power supply voltage (by using them in parallel).

most exciting video

This is gold man

Hi can you please tell me your recording equipment . its very clearly focused. i want to achieve that clarity while recording. please explain your setup. Thank you.

What is the resonator used for with the gyroscope? Is there somewhere I can read more about that interaction? I am having trouble finding out more about why I would need a resonator.

thank you so much.. this is brilliant

is there any document that specify the pin assignment of the Mikrocontroller for the beta flight software?

What did you study? I am interested in your flight controller project. Thank you and keep up the good work.

Hello love your videos..I have a question if you can help much appreciated...i am trying to connect kakute F7 FC with Dalrc 50a 4 in 1 esc using plug connector..The FC plug pin out says (M4~1) ( I ) (G) (R7) (B+) Im not sure what the R7 and I is for exactly..I thought i saw somewhere that ( I ) is NC?

Great video.

hey, can you answer me a question not related to this video? i want to know if it is possible to change the motor wire gauge. I have a motor with 20 AWG and wanted to change to 18 AWG, how can i do it?

i was looking at your schematic and was wondering if you had put motor drivers in your schematic. I couldn't find them anywhere

Can I use px4 qgroundcontrol coupled with my custom build hardware ?

Hello nice Video! Do you continue the Playist for this Controller?

good night just wanted to know what software you use to design the flight pcb am on a m1 Mac

where did you go to school for electronics? im in the states and always heard them called crystal oscillators never really resonators. also i have a 12v NCP1117 on one of my projects and all it does is drop the voltage by 1v. its setup as per datasheet with the 2x 10uf capacitors and im confused as to why it wont work correctly. it would be awesome to make my own FC boards once the chip shortage is over...

How do you know which pin to connect on the STM32F405? or we can do it as the way we want ?

Is there any other flight controller for bicopter and coaxial rotor heli? I am using kk.2.1.5.

If switching regulators can cause interference, can we enclose it with a piece of aluminum sheet and still make it more efficient?

QUESTION: Can we use STM32F405RGT6W MCU 32B ARM Cortex-M4 1Mb Flash 168MHz CPU ??? Didn't know if this would effect the installation.

How can we make a FC like pixhawk cube 2.1 for the commercial usage? they have license on each part what does that mean?

Can you make a video of how to build rudder pedals? It is much easier than the flight controller you did here. How to make a computer recognize the pedals' movement?

Thank you.

excellent!

Can it run ardupilot ? I'am design a flight controller for an autonomous drone and would like to use this project as reference.

i really liked it. You R great

One question please, is your controller programmed with Betaflight programs, inav... If not what solution?

hi, correct me if i'm wrong but is c16 and c17 voltage reg caps 10 nano farad not micro farad?

does source point of mosfet on flight controller is same ? on whole circuit

Thanks!

can you upload a schematic of a flight controller with f7 processor and osd? BTW i am really thankful to your video.

Hi Drone Mesh, have you ever asked them to make the assembly for you ? I don't have the material to do it and that will never be as well done that by their teams. Are PCBways team OK and not faking on differents components ? Thanks dude keep it up