FC & ESC: bit.ly/3xEs15d iFlight Frame: bit.ly/2FtWexy VTX: bit.ly/32ULxgd Antennas: bit.ly/2Sk5d6D Motor Wrap: bit.ly/3chFGUf Nylon Stands: bit.ly/3iHDsk6 FPV camera: bit.ly/3uaOJzU Motors: amaxshop.com/index.php?route=product/product&path=68_69&product_id=488 Budget Motors: bit.ly/3vzSwXO Budget VTX: bit.ly/2QKX3b4 Budget FPV Camera: bit.ly/2QDK7Uw Tools: Hex Drivers: bit.ly/33EGTDN Hemostat: bit.ly/3nxCXg4 Solder Iron Recommended: bit.ly/34B2FYd Silicon Pad: bit.ly/36JrTGv

@BIgoorrr

3 жыл бұрын

Hello, I send you an email, can you please answer for it

@Tazanthro

3 жыл бұрын

That link for the hex tool is not what is in your video...

@grawlix4419

3 жыл бұрын

Links don’t work 😔

@iamthetinkerman

3 жыл бұрын

Deliberately wrong hex tool link, why?

@ulfahgabriels7532

2 жыл бұрын

Pet 8 Pp Kio9i

i love watching things i cant buy edit: 900 likes damn

@rodneybrown9429

2 жыл бұрын

@Dogwillhunt orrr… it could be a kid 😕

@gebongstoner7595

2 жыл бұрын

Or maybe mom's little boy..

@Yuri-gs4ns

2 жыл бұрын

@Dogwillhunt or they're a kid bro

@justsomenamelesssoul8097

2 жыл бұрын

@Dogwillhunt or I'm not from US and minimum monthly salary here is 220$

@bofab521

2 жыл бұрын

@Dogwillhunt dognutt....... ocean is salty you need to rinse off after sooooo no i live 2 blocks from ocean no swimming bums that i can see but tons of bums peeing and pooping on the beach yay

Quick note on soldering: The solder wicks towards the heat (towards the tip of your iron). If you have a big pad to do, try applying heat to one side of pad, then move around wire to the other side and apply solder to the heated side you just left. If it is hot enough to melt properly it should flow across pad and wire towards the iron. This should give you more consistent coverage without trying to wipe with the iron like a paintbrush. Thanks for making this video; it is fun to watch!

@lonewolftech

3 ай бұрын

Or just buy a desoldering gun or a solder sucker… solder wick sucks ass and you’re likely to just dead the thing with it more than actually removing the solder.

I really like how your explain stuff for beginners. Every single video out there they expect us to know everything and throw all of those terms out there without explanation. Thank you

Multiple things: 1) using a PCB holder/bracket to do the soldering is IMMENSLY helpful 2) fluxing the pads prior to tinning makes the heating and tinning process quicker thus reducing the amount of heat dropped in to the board 3) cleaning and tinning your soldering iron prior to actually doing the work makes the work easier while maximizing heatflow in to the solder which reducing the likelihood of creating cold joints 4) when using lead solder, ABSOLUTELY use some means of ventilation. Lead SOOOO bad for you.

@sethenewman4309

Жыл бұрын

This build isn’t even worth it now, damn economy

@lonewolftech

3 ай бұрын

@@sethenewman4309yes it is 😂 broke ass go find a better paying job!

Yooo no way for the past week I have been searching for tutorials and build guides and i saw your older videos and was hoping for an update perfect timing.

Using some flux and brushing your solder tip will help a lot. I know this is an older video but anybody watching it trying to do this for the first time you can get these tiny little needle bottle tip packages of flux, even when you’re using Sauter with flux core, it’s always a good idea to brush and put a tiny bit of flex on your soldering iron to before every connection is soldered

Me: "Budget, ooh I'll watch that" Also Me: Clicks first link, ESC $170+..."yep nope"

@lonewolftech

3 ай бұрын

That is budget… if you can’t afford that you need a career change immediately!

@thefirstbushman

3 ай бұрын

@@lonewolftechyeah...piss off with that mindset! there are so many cheaper second hand options on ebay and if a lower quality board means someone getting into the hobby then it's a net positive!

@tawfiqalfaifi1588

Ай бұрын

​@@lonewolftechcareer change!?😂 Calm down captain maverick I just want it for fun

Beautiful build, Sam! Nicely done! 😃 About screws, you can never have enough of them! It's like clamps for woodworkers. 😬 Anyway, stay safe there with your family! 🖖😊

FINALLY! A new 2021 drone build!

Awesome build bro, thanks for the easy steps of how to build your own quad . I will definitely be using this video to build my drone . I have few people to help me but their too busy, so I guess I got to doit by myself. Thanks again dude 😎👍

If you use the pinout diagrams and blueprints, I highly recommend laminating them (can buy easy sheets from Staples etc) and making a binder ring to hold them all and just leave them on your desk. It's nice having those references rather than always having it up on PC screen when doing 19 other things on PC. This is how I was doing it in my robotics degree.

I have been searching for something like this for a looooong time. Perfect video

Thank you Dronemesh!, my first drone was made using one of your guides. Direct to the point. Cheers!!

@MCsCreations

3 жыл бұрын

Keep building and flying, dude! 🖖😊

@eminent8633

2 жыл бұрын

hey bro how much did it cost you in total everything included?

@RealWorldMaverick

2 жыл бұрын

@@eminent8633 everything is in the description. Go check, click on the links and add it up.

Always love your build videos, please try make more of them

finally, we are waiting for the update

Awesome video! Looking to do my 1st build this fall and I will most DEFINITELY be referring to this video!

cool guide! one thing to mention.. get a bigger soldering tip for connections like the XT60 connector or the ESC pads :D And..sometimes soldering flux is just nice to have (even if the solder itself has some flux core inside) But that's some first-world-problems and not must-have.

This is so helpfull!!!! really apreciate this videos... thanks!!!

Thank you, I have a lot to learn but folks like you are so helpful and the real reason why I started to use KZread to begin with. Saving the video.

@user-hg1td3co1w

Жыл бұрын

CONGRATS YOU WERE RANDOMLY SELECTED FOR THE DRONE GIVEAWAY QUICKLY INBOX ABOVE👆TO CLAIM.

This is a really cool video as a complete novice to drones, would love an updated part list and possibly a small video going over them.

this channel is underrated :) thanks for vid

As of today, this is $388 but some of the components are on sale. Additionally it would be cheaper if you already bought some of these. For example, the link has you buy a whole set of nylon standoffs but you only need four for this build. The antennas come in a pack of two etc

@imsid2253

2 жыл бұрын

The chip shortage really bumped up and made economical parts premium :(

@steve00alt70

2 жыл бұрын

388 is not a budget build

Rather relaxing and cool to watch :) thanks for the inspiration for the next project

You can also buy soldering iron tips that are in different shapes and configurations like a U-shaped one or what have you. Thermal tape on the backside especially with those horseshoes for your power cables are pretty awesome. Ideas as well.

Nice! I’m building myself a beater quad with similar components 💪🏽

The connector for the Antenna at back of Quad is a SMA Jack, The MMCX connector is the one that connects the pigtail to back of VTX x

Thank you. Very nice job explaining the process.

My Mamba stack flies just as well as any of my F7 flight controllers. The 35a Mamba ESC in my 4 inch has been running for months with no problems at all.

this is a really good tutorial video. everything is nicely explained and you even did some mistakes. it shows that it doesn't have to be perfect. some people are afraid of doing things like this cause they don't want to mess up

@heatice77

2 жыл бұрын

Story of my life, I want it to be perfect and I doubt my ability for the quality needed in the details so I just don’t try…horrible outlook, trying to break that habit.

The holes in the pc board are there to put in a tinned piece of wire in to be soldiered correctly, not to fill up with a big blob of soldier and short out your board.

@England91

2 жыл бұрын

Maybe the wire couldn't go through so he did it as a SMD

@Okiijiida

2 жыл бұрын

it hrut me to watch too lol

@Okiijiida

2 жыл бұрын

But like still a great vid

@rehoboth_farm

2 жыл бұрын

I kept wondering why he was doing this. So bad. Just don't solder this way.

@DaveSieswerda

2 жыл бұрын

I just watched the video, and cringed. I doubt he used any static protection either.

ALWAYS make sure the tips shiny ✨

I am IPC Certified and work for a major airline repairing avionic components Tips for soldering: #1 Tin your iron when your are done, this means add a little solder to the tip before you turn the iron off, this helps prevent oxidation on the tip and which makes heat transfer to the board a lot better. #2 when you are soldering in the wires try and make a loop and put them in the holes then add enough solder so that there is a small fillet from the lead of any joint to the pad the solder is sticking to, the shape should look similar to a cone but it is curved inward doing so will make the joints last longer and make it so you never have to solder anything back on. #3 Try and find 63/37 lead/tin solder, it heats well and cools better and faster which will keep your joints in place longer. #4 look for any stray solder beads and also look for cracked or cold solder joints. A simple google search can show you an example of such. #5 be careful with how much heat you are using, if you use too much heat you can delaminate the layers of the boards and that can destroy the boats. A good temperature is 600-700F favoring the lower number because it will make your soldering iron last longer. If you need any other advice or need help just DM me

I think you are the Bob Ross of FPV 🤣 🙌🏼🙌🏼🙌🏼

the best explanation so far

@abhilashagarwal7935

2 жыл бұрын

What stupid Name is that ☠️

@Mwtorres89

2 жыл бұрын

@@abhilashagarwal7935 I wouldnt talk if I were you

Right on brother . Outstanding you did this video perfectly 🤘🏻

This was a really well done video, Good Job!

when will second video about this build came out?

If you get any cold solder joints, try holding the iron on pad for a second or two longer before applying solder/wire. I saw some potential points of failure where the solder did not get fluid enough.

@fearlessflyersfpv420

2 жыл бұрын

Just use 63-37 and you can't get cold solder joints

@nefariumxxx

2 жыл бұрын

@@fearlessflyersfpv420 If you don't hold the iron on long enough to heat up the pad underneath fully - yes you can. Need to heat up both pretty well for a good strong bond. No use being in a hurry. Cold solder joints can show up months later as intermittent problems until the solder joint is found and refreshed. Can even be years later due to expansion/contraction from temp changes. I do use classic 60-40 rosin core.

@fearlessflyersfpv420

2 жыл бұрын

@@nefariumxxx 63-37 and 60-40 don't work the same, I am not sure if you are aware of the difference or not. For electronics 63-37 is superior, but I get what you are saying, There is a still an essential difference between 63-37 and 60-40. Maybe check it out to see what I mean (uetectic).

Super clean & budget build !!👌👌👌

Consider grabbing a TS-80P or TS-100 iron and some thinner gauge solder, it'll make working with those pads a lot easier

With this exact config, what kind of range and battery life could you expect?

I've watched several builds from different channels and I was wondering if anyone knew you can insert the wires into those holes and still solder them down. FYI, 20 years Navy Electronic Repair Technician now an Electrical Engineer, just in case someone wanted to comment that I was talking out my butt.

@merseyviking

2 жыл бұрын

I was thinking the same thing - it's going to be vibrating a lot, so you need all the mechanical strength you can get.

@xBaZZZZZx

Жыл бұрын

Yes, better make it through holes.

@tacticoolnukes849

Жыл бұрын

0 qualifications here so don't take me at my word, but I find if you put the wires through the holes and solder, the 90° bend with pre-stress the joint and make it more likely to break. Also, it's just much easier to solder to the pad horizontally for me.

@paulhopkins1905

Жыл бұрын

@@merseyviking strength isn't a problem, but using the through holes will give a way cleaner connection with less solder

@cHAOs9

Жыл бұрын

This was why i looked at the comments. Was confused why he wasnt using the holes. Ya know like every piece of electronics ive ever seen?

Basics of how you do that very helpeful. Thx for vid. Now Its more easy to craft own quad.

Most certifying video ever , Perfect explaination I have really learned something new from here today 100% thanks you so much.

Great video! I found that using vcc rather than the 9 volt pad on the vtx gave me alot better performance with the tank . from everything I have read they cant take all the voltage you can throw at them.

@AdrenalineAshRC

3 жыл бұрын

Hi Jim , So should I use the vcc pad instead of the 9v pad on the vtx? Would that be better ?

@AndyDreadFPV

3 жыл бұрын

@@AdrenalineAshRC use 9v if it works fine and u get the full power 800mw then leave it. If you don't then move it to vcc

@jimlibey4042

3 жыл бұрын

@@AdrenalineAshRC make sure the vtx you are using is rated for vcc. the tank he used in the video is.

@AdrenalineAshRC

3 жыл бұрын

@@jimlibey4042 thanks a lot bro 😎 really appreciate your help 🙏🏻

Adding a capacitor to a modern 4in1, even on 6s, is in my opinion so much overkill. (most of them run 2-4000 uF low ESR smd caps already built in) Plus - by using the throughhole package you always risk a short on your bat voltage ... frying everything - even if you shrinkwrap the little legs/clearcoat it. If you want smoothing for voltage spikes I would suggest buying a small PCB board which comes in many different uF - values instead of the big ones with exposed spiny metal legs. :D

@LeRainbow

Жыл бұрын

@Rosetta Stoned Love the name 😂👌

Excellent beginner tutorial!

You missed the most important thing: how much will it cost ?

Using blue tac would make your life so much easier. You can hold into place anything while soldering. It's super cheap and easy to use.

AWESOME Thank you apriciate video

Capacitor fitment is quite unfortunate. Legs of capacitor should be in thermo isolation. Cut out in frame and not isolated capacitor legs makes it perfect spot to be shortened by wet grass. Ideally + / - ESC pads should be painted with fluid isolation as they are prone to be shortened in same spot where the cut out is.

So what battery do you use on this? Thanks for making these videos

@franklindasilva7220

2 жыл бұрын

I would like to know too

i love your vids man very helpful in building .....cant wait to save for new frame cant fly for now :(

Your work made my science experiments easier

Instead or soldering right to left or left to right, wouldn't it be better to advise beginners to work on the soldering pads from the outside and not from the inside on the fc? That way there is less chance of dropping a solder blob on the components from the tip of the iron. I have had shorts because of this. Luckily my shortsaver gave me a heads up and I didn't directly plug in a LiPo. Also, changing the tip to a flatter and larger one will save a lot of effort when soldering the Xt60 and the motor wires! Also a lot less contact time between the soldering iron and the solder pads. I almost lifted a pad because of contact for too long with a small tip!

is this build better than sector 5 v3 or nazgul 5? Almost same price, whats the benefits of this custom build. Peace✌️

@madladdan

3 жыл бұрын

It's far more expensive

I like a 2 irons setup - one with a flat tip - one point. Wide is just to heat the wire and tab just enough to prime them with soldier. Then do the fine work and clean up with the point. That keeps me from, over heating the board. It also heats everything evenly faster, with less hot spots. Also, good soldier and flux matters. ESP. when you start out.

this man has steady hands damn

Pretty effing sick what you get for a “budget” build these days.

@maxortega8073

2 жыл бұрын

Fax I swear this is like $400

@steve00alt70

2 жыл бұрын

@@maxortega8073 budget is more like $40 or less for me. You can get a decent one on ebay for $40

@Wilhuff_T

2 жыл бұрын

@@steve00alt70 Link of the$40 drone pls.

for the price of that fc, you can almost build an entire quad

@sayhello2pedro

3 жыл бұрын

What quad would you build? Just getting in to the game and would love to know.

@Kai-ln5fq

3 жыл бұрын

you cannot build a 5" racing quad for $85....

@user-uu7og7sn7m

2 жыл бұрын

@@sayhello2pedro you can start with Mamba F405 Mk2 which is almost two times cheaper and you'll hardly notice any difference.

@sayhello2pedro

2 жыл бұрын

@@user-uu7og7sn7m thank you, I’ll look it up

Amazing sir, it's easy to understand and explained very well

Your show is relaxing!!! Also you make this look easy!!! Wish I knew what you were doing. I kinda followed it.

@user-hg1td3co1w

Жыл бұрын

Congrats 🎊 you won a DRONE PRIZE. I hope you like the prize and thanks so much for commenting. Quickly inbox above for it Good luck👍...

How much money is the total for this budget build?

@alexanderwilmann6347

3 жыл бұрын

200 for the budget and 270 for the other version

@mattivirta

2 жыл бұрын

NOT have "budget" build. wery expensive near 400$ same can build less than 100$ select parts smart cheap

Geez, use some flux on those solder points, man! :) Especially in a high vibration environment, it will decrease the risk of having a bad or cold solder joint

Retired now so decided to learn about Drones. Loved your video. Very informative. (I would have placed a small strip of Sellotape on you diagram paper.) - :)

Great walk through. Love the comments "Hot as hell" haha! Good stuff sir.

It is just not a budget built at all.. Lets be honest :D

@sethinman7206

3 жыл бұрын

haha, if you think this is expensive... IT GETS A LOT WORSE

You neeeeed training desperately in soldering technique

@sappireflames0009

3 жыл бұрын

you should see my work I just did. one word to describe it; atrocious.

must be about 2yrs I did not came across or videos, helping as usual;)

@user-hg1td3co1w

Жыл бұрын

Congrats 🎊 you won a DRONE PRIZE. I hope you like the prize and thanks so much for commenting. Quickly inbox above for it Good luck👍.

great video thank you! your solder jobs will be way easier and better if you use flux!

great video thanks bro!

@user-hg1td3co1w

Жыл бұрын

CONGRATS YOU WERE RANDOMLY SELECTED FOR THE DRONE GIVEAWAY QUICKLY INBOX ABOVE👆TO CLAIM.

3:55 never too much soldering flux. Feel free to add (a lot), soldering flux. It helps to do the job perfectly (clean with isopropyl alcohol afterwards)

Love it. These vids are awesome.

i was allways tought to not hold the solder too long but this dude is taking his time15:58

Great job on making this video

I never use the conical tip. you dropped a solder blob on one of the motor wires just to let people know and watch out for that like you said. Awesome frame and might get that one to fit my ESC.

akk race ranger vtx has a heat sync too! for the win!

Nice love it, waiting for next video

Thank you so much!!!! God bless you!!!!!

nice touches

great video, next part please :)

I wish I can be your student. Very good in explaining things.

This is really enjoyable to watch. Please don't take this the wrong way but you need to do a soldering course, your soldering had the hairs on my neck standing up.

Helping hands is another good option for soldering wires onto boards like these.

@user-hg1td3co1w

Жыл бұрын

Congrats 🎊 you won a DRONE PRIZE. I hope you like the prize and thanks so much for commenting. Quickly inbox above for it Good luck👍 !!!

Atlast someone uses the xl5 frame

@sairams8879

2 жыл бұрын

Hey pls do an update for this

Do you have a video showing how to set it up on beta flight? Thanks for your videos. Very instructional.

I am a new follower of your channel Greetings from Sweden

thanks great build :)

beautiful

Very nice drone racing bro 😍 I like it

Awesome! Thanks :)

A lot of people don't know you get can other soldering tips. I recommend having a very fine tip, the regular tip in this video, and a chisel tip that's flat for wider surfaces. I use those the most.

@StraitD2

11 ай бұрын

The idea with soldering, for those who don't know, is transfer of heat. You need the copper plating to be hotter than the iron so the solder attracts to the copper pad and away from the soldering iron. If you don't heat the copper pad up enough and you pull the iron tip away, the solder will follow the tip. It helps to heat the copper pad up first momentarily, then add your solder and wire immediately after, so you don't have to hold it in place for so long, because the solder melts quickly but it steals a lot of the soldering iron heat so it doesn't transfer as fast to the copper plating on the PCB. Heat the copper up first.

I have made this exact build but have a few problems with it, would be great if you uploaded the configuration video for Betaflight

So great building views. Big like^^ . Take care & seeU. ^^

Hi Drone Mesh, thanks for the video. Hey, where's the link to that hex driver with the quick swappable bits? The link you have in the description all point to hex driver sets with 4 full drivers. I like the one you are using in your video with the easily swappable bits. Thanks for the help.

I watch your video every day your contain is very nice and it help me to build my own drone

@user-hg1td3co1w

Жыл бұрын

Congrats 🎊 you won a DRONE PRIZE. I hope you like the prize and thanks so much for commenting. Quickly inbox above for it Good luck👍 !!!

Great content as always. Quick question what is the cable sleeve diameter?

Get a finer point on your soldering iron it dramatically reduces bridges.

Looking at this one.. be my first build, when's the set up video out ?