HOW TO BUILD A WINDOW SCREEN
There are many ways to screen a window screen. This is how I build a window screen in the shop. I hope maybe some of these tips can help so of those DIY at home repairing screens as well. This video will be mainly for training new employees. I hope you enjoy any feedback would be great.
Пікірлер: 145
Best of all I've seen... thx!
@JoshuaTheWindowCleaner
9 ай бұрын
Thank you for the encouragement 🤗
Thank you, Finally someone that knows how to teach and had detail!!
@JoshuaTheWindowCleaner
Күн бұрын
@@bobcyrus thank you for the encouragement! 🫡
Thank you for that tip about a little slack. I have failed with many frames twisting after mesh installation. That spline really pulls a lot of screen in.
@JoshuaTheWindowCleaner
8 ай бұрын
Yes it does! Something I learned over time. Thank you for the encouragement🤗
I do screens a couple of times a year. Watch your video to refresh my memory. Excellent job, Nice to see somebody who cares about the quality of screens as much as I do.
@JoshuaTheWindowCleaner
Жыл бұрын
Thank you for your encouragement Peter! 🫡🤙
Top quality and a really comprehensive training video. Thank you.
@JoshuaTheWindowCleaner
11 ай бұрын
Thank you for your encouragement and kind words 🤗
Nice! Thinking about doing something like window cleaning and screen repair to stay busy after retirement! Great video Joshua appreciate this 👌👏
@JoshuaTheWindowCleaner
3 ай бұрын
No problem happy to help.
You are awesome at explaining things, it really helps us!!!
@JoshuaTheWindowCleaner
Жыл бұрын
Thanks for your feedback! So happy to help!! 🤗
thanks for sharing the knowledge!
@JoshuaTheWindowCleaner
9 ай бұрын
Thank you for the encouragement!
Thank you 🙏 really best video I’ve seen extremely thorough explanation and lots of good tips/advice
@JoshuaTheWindowCleaner
9 ай бұрын
Thank you!
Definitely going to help my window washing business. Thank you :)
@JoshuaTheWindowCleaner
Жыл бұрын
No problem! I am glad this helps you! 🤙
Great video! Thank you for sharing good, detailed information.
@JoshuaTheWindowCleaner
3 ай бұрын
Thanks for watching!
Excellent tutorial. I like your setup.
@JoshuaTheWindowCleaner
9 ай бұрын
Thank you! 🤗
In my area, one side of the screen tool is convex and used for setting the screen material in the groove prior to spline installation.
Best video on screen replacement on all of screwtube... I redid my screen four times, saw this video, and it came out amazing on the fifith... The manipulation of the spine with pressure on the screen was the cock fordollie and made it perfect... Thank you!
@JoshuaTheWindowCleaner
8 ай бұрын
So glad it helped you!! Thank you for the encouragement!
Excellent explanation! Your attention to detail in the screens & in your video really helps me and I’m sure many others. It’s not often that someone has the practice, “feel” & ability to express that knowledge are in the same video. Thank you!
@JoshuaTheWindowCleaner
Жыл бұрын
Thank you for your encouragement my friend. 🫡
Excellent video instruction ❤ !
@JoshuaTheWindowCleaner
5 ай бұрын
Thank you!!
Thanks for sharing !!!
@JoshuaTheWindowCleaner
3 ай бұрын
Thank you!
🌻🤗🌟Joshua….. YOU give an EXCELLENT demonstration of making the window screen. I made one screen prior to watching your demonstration video with EXPLANATION. My mistake was made causing the screen to bow in. You showed throughly in this video how to avoid that mistake. LoVe your video.💛
@JoshuaTheWindowCleaner
Жыл бұрын
Thank you so much for the encouragement!! 🤗❤️
For a beginner I think you have done well!
Thnx for the tutorial .
@JoshuaTheWindowCleaner
5 ай бұрын
No problem!!
Perfect, tutorial video.
@JoshuaTheWindowCleaner
Жыл бұрын
Thank you! 🤗
Thanks
Good video
@JoshuaTheWindowCleaner
2 жыл бұрын
Thank you bro! 🤗
Great video! Just a few questions on material. Where do you get the 12ft frames? also where is that spline tool from?
@JoshuaTheWindowCleaner
Жыл бұрын
Hey Oscar! You can actually purchase them from us as we are now a dealer for screen materials and tools. I have the spline tool for sale as well. We ship all over the country. If you need anything just email me at JoshuaTheWindowCleaner@gmail.com.
Hey, really nice job with the bow factor. I really failed miserably at my last effort. I had 4 sides bow in so bad it was sad. After seeing this video I’ll try again this weekend with new materials. Do you feel that the kits with plastic corner inserts can work fine as well?
@JoshuaTheWindowCleaner
Ай бұрын
From my experience the plastic corners only last about a year in the sun but they can be a temporary fix.
For your miter saw blade, how many teeth does it have? Any recommendations on brands? Thanks!
Hey Josh thanks for the video, question what kind of ruler should I get for a 45’ cut?
@JoshuaTheWindowCleaner
Жыл бұрын
Thank you for your encouragement! I would recommend getting a saw that can cut at 45 degrees. Hope that helps my friend 🤙
Very good. What kind of corners did you use
@JoshuaTheWindowCleaner
9 ай бұрын
Aluminum corners
Great video What king of measuring jig is that does it have a name or any idea where I can buy one
@JoshuaTheWindowCleaner
23 күн бұрын
I don’t think they make them exactly like this one anymore.
Hi i really love the value you put out. Can i donate to your page somehow ?
@JoshuaTheWindowCleaner
10 ай бұрын
Yes! You can send it through Venmo @Joshua-Birdsell-1
Thank you for the video. I was wondering, when you "cutoff the little bit" why not do it at a 45 so you only need to do 1 more cut after that?
@JoshuaTheWindowCleaner
4 ай бұрын
That’s actually what I started doing a few weeks after I made this video. I actually flip the frame over cut that piece off then flip it over again and slide it to the end and make the cut and that way I don’t have to even move the angle of the saw. 🫡
Hey Joshua thank you for the great video! I did have a question on where you got those corners from? And I just want to say this was the video I was looking for👍
@JoshuaTheWindowCleaner
Жыл бұрын
I have a manufacturing company here in Southern California that I get everything from. But I am a local supplier.
how do you measure the windows for insect screens? great video on how to screen
@JoshuaTheWindowCleaner
Жыл бұрын
I’ll have to make a video because it’s hard to explain and depends on the window frame itself.
@Professional_ProCraftinator
5 ай бұрын
Did you make that video about measuring windows to make screens yet?
I have watched other videos where they say to pull slight tension on screen as you roll the final 2 sides. So are you saing not only to not pull tension but also to leave slack? Is this correct? I will be putting solar screens on 3/4 frames soon. Trying to figure out the best method.
@JoshuaTheWindowCleaner
10 күн бұрын
@@kevinwinkle8091 I do not pull tension. I let the screen pull itself
Also are your measurements always on point when you install the new screen back ?
@JoshuaTheWindowCleaner
9 ай бұрын
Yes
Have you ever built one on an angle? I'm trying to add panels for the gable of a screen porch but I can't find any connectors that are not 90 degrees.
@JoshuaTheWindowCleaner
3 ай бұрын
Yes you will need adjustable corners. I have them if you need some email me. You will need 7/16 frame for them. JoshuaTheWindowCleaner@gmail.com
As I am looking into adding this into my business, where do you get your supplies?
@JoshuaTheWindowCleaner
10 ай бұрын
I get everything local here.
Where can I buy the pull tabs at the bottom of the frame?
@JoshuaTheWindowCleaner
2 ай бұрын
We sell them if you need them email me. JoshuaTheWindowCleaner@gmail.com
Also do you like doing it this way better than the plastic corners ??
@JoshuaTheWindowCleaner
Жыл бұрын
Absolutely because the plastic corners do not last very long. This way is much better quality
I was doing them today - but my always get bent in the middle- I don’t even pull the screen it’s even saggy in places but the frame bends in the middle
@JoshuaTheWindowCleaner
3 ай бұрын
You want to bow the screen frame out so when you tighten the screen it will be straight.
What do I need to make an order? Just get count and measurements?
@JoshuaTheWindowCleaner
2 жыл бұрын
Are you local? You can call and order with your screen sizes. We can also take payment over the phone and then your order will be started. 🤗 We ship anywhere in the USA.
Hey Josh, I’m getting into the screen business full time, and I do need bulk of materials. You said you we’re a supplier of screen materials ??
@JoshuaTheWindowCleaner
Жыл бұрын
Yes I am email me your order and I’ll give you a price. My email is JoshuaTheWindowCleaner@gmail.com also email me your address so I can check price on shipping
where can I get that jig?! I can make one, but it won't be as efficient as that.
@JoshuaTheWindowCleaner
10 ай бұрын
Not sure it was already in the screen shop when I purchased it 😬
Should the spline be facing the outside of the window after installation or should the spline be facing towards the inside of the house?
@JoshuaTheWindowCleaner
Ай бұрын
Spline should always face the outside
@FernandoRodriguez-ds5ri
Ай бұрын
I personally prefer the spline to face the inside of the house, it’s more of a cleaner look & the spline will Not get brittle with the sun beaming down on it. My .02
@JoshuaTheWindowCleaner
Ай бұрын
@@FernandoRodriguez-ds5ri that is fine as far as preference but the design of the window screen is made to face out and pull tabs are on the inside to pull in from the inside of the window. When you get a new window from the factory that’s the way it comes but there is no wrong way that’s just how it is designed. 🫡
👍🏻👈🏻
How do you normally charge to make a screen labor only
@JoshuaTheWindowCleaner
Ай бұрын
For you I would say depending on how long it takes you should be making $150 per hour but this is just my preference. Everyone is different on this and it depends on overhead and location.
If you can say it. How much do you charge per screen? Thank you!
@JoshuaTheWindowCleaner
2 жыл бұрын
This screen would be about $60 after taxes if you was to come in our shop and ordered one. 🤗
Where did you get the metal corner pieces? All I can find are plastic and they brake ever year due to the weather.
@JoshuaTheWindowCleaner
Жыл бұрын
We are a supply shop here in Southern California. You would need to build the screens with a 45 degree cut for the metal ones to work. I can ship some if you need any. 🤗
@Professional_ProCraftinator
5 ай бұрын
@@JoshuaTheWindowCleanerDo you know what frame cut the plastic ones work with? I replaced all the plastic corners in one window screen, but it didn't seem to fit like I expected them to. And I had the bowing issue also. Now after watching your video, I am certain I can fix the bowing problem. But I couldn't fit the screen back into place, so I wonder what my problem was. The plastic corners seemed to match my old one exactly. 🤷♀️
@JoshuaTheWindowCleaner
5 ай бұрын
@@Professional_ProCraftinator thank you for your email also! I hope the email helped answer your questions! 🤗
What blade do you recommend for the miter saw?
@JoshuaTheWindowCleaner
Жыл бұрын
10” Saw Blade - 200 Tooth - Hi Speed 5/8 Bore
@JoshuaTheWindowCleaner
Жыл бұрын
This is the best from what I’ve tried.
Why not switch from right 45 to left 45 on beginning of each cut ? Just curious if you know something i dont
@JoshuaTheWindowCleaner
Жыл бұрын
For me it’s faster to flip the stick.
Bonsoir Mes felicitations Est ce que je peux apprendre à frabriquer avec toi ce metier?
@JoshuaTheWindowCleaner
2 ай бұрын
Thank you!
Where did you get that jig?
@JoshuaTheWindowCleaner
Жыл бұрын
I got the jig from a place in LA
@LoopSwoopNPull
6 ай бұрын
I’m in Bakersfield, Ca. Not too far from LA. Can you share with me the name of the place you got the jig from?
where do you get those corners?
@JoshuaTheWindowCleaner
4 ай бұрын
I am a supplier so I get them from my vendor.
@redsresearch
4 ай бұрын
@@JoshuaTheWindowCleaner where can I get them?
@JoshuaTheWindowCleaner
4 ай бұрын
@@redsresearch I’m not sure in your location but I can ship some to you. How many do you need?
Hello Joshua, thank you for your great content. Have you ever had the spline shrink in the spline channnel after you cut it? I’ve tried 2 different brands of spline and they both have shrunk about 1 inch at both ends. Do you have any tips to resolve this? - Clarissa
@JoshuaTheWindowCleaner
Жыл бұрын
Yes I have seen this before. You need to use bigger spline for the channel. What’s happening is your stretching it when you put it in the channel and as time goes by it goes back to its normal size because there is too much room in the spline channel. Try going up .10 maybe even .20 in size see if that helps. Keep me posted. Also weather can play a factor as well if your in a cold environment try doing it in a warmer environment. If that doesn’t fix it let me know what size your using and maybe I can send some your way we have plenty of spline and it wouldn’t cost much to ship it to you. The quality of our spline is top notch.
@simplifyingthings9069
Жыл бұрын
@@JoshuaTheWindowCleaner Thank you for your response. From your videos, I’ve learned how to rescreen. When doing my own windows, I had no issues (after I got the hang of it) and the results were amazing. There is one business in town and one that is 15 miles away that rescreens. Both are hardware stores and from my experience they seem to not pay too much attention to detail (screen grid not aligned with frame, ripples in mesh, etc). Based on this, I saw an opportunity to provide quality workmanship to those in my area. I’ve started a rescreening business, which I’ve registered with my state and local municipality. This is my first client, and it’s a 21-3/4”x 24-7/8” removable window from an old Larson storm door. The client tried rescreening it herself using .125 spline and had the same issue with shrinkage. I have tried .125, .14 and .16 spline. The .16 spline was very difficult to roll into the channel and I snagged the screen several times attempting to insert it. Also, by the time I finally completed one side and turned the corner, even the .16 had shrunken in the channel. The channel itself is measuring 1/8 inch and I’m using the Phifer BetterVue screen mesh, which recommends .14 to .175 size spline. Having been stumped, I reluctantly took it to the local hardware store, which also used .14 spline. However, where they were satisfied with ripply mesh and a spline gap, chalking it up to “a thing that happens,” I know that I can do better. Regarding the weather, I’m in West Virginia and it’s been in the low to mid 30’s, but I’m working inside my heated basement. Are there special considerations for 4 season climates? Once the immediate shrinkage issue is solved, will changes in the weather cause more expansion/contraction of the spline? Another idea I had was to use a thicker mesh, but the client wants to maximize the light penetrance and visibility. Thankfully, my first client is a good friend. But she is very well connected in my town and I want to do a great job and get referrals.
@JoshuaTheWindowCleaner
Жыл бұрын
@@simplifyingthings9069 fantastic!! Thanks for your feedback! West Virginia is beautiful I have lived in Virginia and done work in West Virginia many years ago in the oil field so I understand the climate. My email is JoshuaTheWindowCleaner@gmail.com send me your address and I’ll ship some spline to you and you can tell me if it’s any different then what you are using currently. Good for you on wanting to be quality that’s what made me have the reputation I have in my community. If the spline quality is bad then it will expand and contract as the seasons change for sure but not enough to make a huge difference if you have the proper spline size for the frame. Send me pictures to my email of what your using now as far as spline and frame and let me see if I can diagnose the problem for you and see how I can help. Stay encouraged and I look forward to your email 🤙🇺🇸
@simplifyingthings9069
Жыл бұрын
@@JoshuaTheWindowCleaner Thanks Joshua. I just sent you the email.
Where do you get the 12ft frames ?
@JoshuaTheWindowCleaner
6 ай бұрын
I am a local supply shop so I get it from my vendor.
@edgarsanchez9017
6 ай бұрын
Where can I buy them ? I live in Texas
@JoshuaTheWindowCleaner
6 ай бұрын
@@edgarsanchez9017 I would try your local ace hardware store.
@edgarsanchez9017
6 ай бұрын
Y’all guys don’t sell them ?
@JoshuaTheWindowCleaner
6 ай бұрын
@@edgarsanchez9017 yes we do! Shipping would be very expensive for you but if you don’t mind paying it I don’t mind giving you a quote. Email me at JoshuaTheWindowCleaner@gmail.com and let me know what you need. 🫡
No crow’s foot when you mark a measurement?
@JoshuaTheWindowCleaner
Жыл бұрын
No I use a jig
How much for that screen???
@JoshuaTheWindowCleaner
7 ай бұрын
$75.00
oh come on If they dont understand 1/16th of an inch on a measuring tape they need to call someone to do the screens
@JoshuaTheWindowCleaner
Жыл бұрын
I also use this for a training video for my employees. Believe it or not there are still people who don’t know that. 👍🏼
@wulf67
5 ай бұрын
I disagree. I’m sure you could build window screens just fine measuring in eighths or even quarter-inch increments as long as you were accurate and consistent. You’re not building a piano.
Wouldn't it be a lot easier to just measure in metric? If you can count to ten then you're set
@JoshuaTheWindowCleaner
Жыл бұрын
Maybe for some but this is how I have always done it. 🤙
@wulf67
5 ай бұрын
Metric is fine for those who can only count to 10, but after the age of about four or five when you can get to 32 or 64 with little difficulty then you should step up to the Imperial system.
@jondennert
5 ай бұрын
@@wulf67 thats actually a step backwards
@wulf67
5 ай бұрын
@@jondennert It seems to work very well for the wealthiest and most scientifically, technologically, and militarily advanced country on earth. Metric is a third-world system of measurement.
@jondennert
5 ай бұрын
@@wulf67 you can't be describing America? Seriously?
Shows how to count the 1/16" marks on tape measure, but not where to get measurements on window frame which is kinda the only part people have trouble with lol
@JoshuaTheWindowCleaner
3 ай бұрын
Good idea! I’ll make a video explaining how to do that. This video is just how to build a window screen not how to measure to build a window screen. 👍🏼
@tomtrowbridge2616
2 ай бұрын
@@JoshuaTheWindowCleaner Yes! How to measure the windows for replacement screens. There are several vidoes out there but I find them a bit vague.
@JoshuaTheWindowCleaner
2 ай бұрын
@@tomtrowbridge2616 I am working on one now but there is many different windows the one I’m making now is standard in my area. I’ll be posting it tonight so stay tuned. Let me know your thoughts.