Thank you for the inspiration ❤

Always without viewing give you like because I know you are good woodworker ✌️

@WoodshopDiaries

10 ай бұрын

You’re so kind. I appreciate the support! 🙌

'Clean, simple, and practical".........three woodworking words that never get "old!" DD

@WoodshopDiaries

10 ай бұрын

So glad you enjoy these projects! I appreciate you watching!

Love it...nice work!

looks great!

Made a similar version with red base and mahogany seat. If you don't have them yet, look into 1-2-3 blocks. About $20 for a set of two but they make measuring 1"-6" so much easier.

So beautiful work well done 😊😊😊

@WoodshopDiaries

10 ай бұрын

Thank you so much! I appreciate you watching!

Very nice.

As you say .... not your biggest and difficult builds, but ..... still interesting and nice to see .... thanks again .... nice weekend.

@WoodshopDiaries

10 ай бұрын

So glad you enjoyed watching it! Thanks so much and have a wonderful week!

Great video

Hi Shara...I appreciate you...

@WoodshopDiaries

10 ай бұрын

Hi! I appreciate you as well! Thanks so much for watching!

Dang great job ❤

Nice looking bench. Even being simple, it still looks great and can be used in a lot of different areas. Have a great weekend Shara. Steve

@WoodshopDiaries

10 ай бұрын

Thanks so much! I’m glad you enjoyed it and hope you had a wonderful weekend (I’m late this week to responding 🙈)

Love the build. I'm glad I founf your channel. You have great ideas and easy to follow instructions.

The Perfect project that has function, Thanks for sharing Shara.

@WoodshopDiaries

10 ай бұрын

Thanks so much! I appreciate you watching!

Looks great, I really love the colour combination.

@WoodshopDiaries

10 ай бұрын

Thank you! I’m definitely going to have to use this paint color on another project 😍

The bench looks great I like the Gray and stained finish on the bench. Thanks for sharing this.

@WoodshopDiaries

10 ай бұрын

Thanks so much! I am glad you liked the color combo here. It might be a new favorite of mine! Have a wonderful week and thanks again for watching!

Very nicely done!

@WoodshopDiaries

10 ай бұрын

Thank you so much! I hope you have a great weekend!

It is a very practical project. And your video explains the process very nicely. Thank you for sharing.

@WoodshopDiaries

10 ай бұрын

Thanks so much for watching! So glad you enjoyed it!

Shara!! Clean, simple, practical and very cool! Thanks for sharing🤙🏾💯

@WoodshopDiaries

10 ай бұрын

Thank you so much! That was exactly what I was hoping for 😊 I hope you have a wonderful week and thanks so much for watching!

@lovejones7545

10 ай бұрын

@@WoodshopDiaries Most definitely! You have a wonderful week too!

This is on my list. Perfect size and design

@WoodshopDiaries

10 ай бұрын

Thanks so much! So glad to hear you loved the project. Happy building!

Simple, sleek, clean, functional 💯✨

@WoodshopDiaries

10 ай бұрын

Exactly what I was going for! So glad you enjoyed it!

Super idea. Love how it looks with the angles on the legs.

@WoodshopDiaries

10 ай бұрын

Thanks so much! I think the angles really add some interest. I appreciate you watching!

Gorgeous as usual!! LOVE IT!!! You are the best! 😍😍🤩🤩 Your fan Candy

@WoodshopDiaries

10 ай бұрын

Thank you so much! I really appreciate you watching and following along! I hope you have a wonderful week 😊

Like this bench very much. Very nicely designed and completed.

@WoodshopDiaries

10 ай бұрын

Thank you so much!

Shara, I don't know how you knew I had a couple of 2 x 4's laying around my shop taking up space and with no particular use in mind....until now! Also, as I've mentioned before I love it when you throw in those angles. I can see where the purchase of your plans for this project will be a definite plus. The weather here has been absolutely gorges so building this with all the doors flung wide open will be great! I have to tell you that you look cute sitting on top of your bench with your legs crossed. Hugs and kisses for your critters. Thanks for Sharing! 🙃🙂

@WoodshopDiaries

10 ай бұрын

I’m glad I could help you find a good use for those spare 2x4s 😁 haha! I’m glad you liked the angled legs-I debated back and forth on doing an angle at all and how much. I have no idea what I’m doing most of the time…so I’m glad this actually turned out nicely. Enjoy that nice fall weather! I hope you were able to make some sawdust this weekend. Have a great week!

Beautiful. And the shoe bench is very nice too😉

@WoodshopDiaries

10 ай бұрын

haha! Thank you so much! I really appreciate you watching!

Awesome! Thank you for the details! Keep at it queen!

Very nice build Shara it looks great too. Take Care and Stay Safe, Barry (UK)👍

@WoodshopDiaries

10 ай бұрын

Thank you so much! I hope you had a wonderful weekend and have a great week!

That turned out very well.

@WoodshopDiaries

10 ай бұрын

Thanks so much! 💕

Adding this to my fall project list!

@WoodshopDiaries

10 ай бұрын

Awesome! Happy building! 🙌

Love it Shara! Looks great!

@WoodshopDiaries

10 ай бұрын

Thanks so much! I appreciate you watching!

love the simplicity and color this may have to be my first project for shoe storage

Supernice, I like the clean simple look and the colours of the bench. Nice workshop as well and the video is so well done in the same simple easy way with explanations and very inspirational! Subscribed👍👍👍

A simple and beautiful design. Nice work!

@WoodshopDiaries

10 ай бұрын

Thanks so much! I appreciate you watching and hope you have a wonderful week!

Love this bench. I’d love to make a tv stand like this!

@WoodshopDiaries

10 ай бұрын

This would be awesome as a larger console--I may have to add that idea to the project list!

Love the thumbnail picture of you on the bench! Also love the fact that you are making lots of shorts!

Great looking bench, Shara. I have several friends who take off their shoes just inside the front door. They always wear slippers in the house. This bench would be great for them.

@WoodshopDiaries

10 ай бұрын

Thank you! I wish I was that disciplined--I also have a friend who is adamant about no shoes in the house. That's definitely not me, though 🙈 I appreciate you watching and I hope you have a wonderful week (I'm too late to wish you a great weekend, but I hope it was a good one!)

@pteddie6965

10 ай бұрын

Have a blessed week!😀@@WoodshopDiaries

I’d love to make this, maybe one day!

@WoodshopDiaries

10 ай бұрын

You can do it! Happy building!

Nice job. I just got into woodworking at 46 years of age. Making 3 counter height bar stools myself. Fairly similar on the build to your bench really. Thank God for pocket holes. Keep up the good work.

Beautiful shoe bench! The color combination really is nice! Your instructions are always very helpful and are easy to follow. Thanks for another great project! Have a great weekend Shara and keep on building!!!

@WoodshopDiaries

10 ай бұрын

Thanks so much! I appreciate you watching and hope you have a great week!

@WillysPerformanceCycleCtr

10 ай бұрын

@@WoodshopDiaries ….. I think I know what you were doing this weekend! My wife said that over on Instagram, you were cutting designs on a CNC! Hope you share that over here! You’re the best! Keep on building!

That would be such a useful bench to have. I love how it turned out! Great narration/instructions as always. Missed seeing your shop mascots but imagine they were nearby. 😊

@WoodshopDiaries

10 ай бұрын

Thank you! Yes, this would definitely be useful in many places around the home. So glad to hear you enjoyed watching! The shop animals were around, but our weather has been AMAZING this week, so they've been just outside the door enjoying the sunshine and the breeze. Bubs makes an appearance in the next video, though, so you'll see them soon! 😊 Have a wonderful week!

Great work on the bench it looks amazing ur a talented lady love the bench

What a beautiful bench!

I love it. Simple but really nice. Awesome video 😊

@WoodshopDiaries

10 ай бұрын

Thank you so much! So happy to hear you enjoyed it. Thanks for watching!

Great design and explained very well😊

@WoodshopDiaries

10 ай бұрын

Thanks so much! I appreciate you watching!

Love the bench idea and will build one to be use outdoors near our backdoor as this is our entry and exit point. That being said due to the weather in Montreal I will change the glue I use to allow for the freezing and heat. Thank you for another easy, but practial project

Stunning shoebench, Shara! Amazing work! 😃 Stay safe there with your family! 🖖😊

@WoodshopDiaries

10 ай бұрын

Thanks so much! I so appreciate you following along. Have a wonderful week!

I really needed a small bench like this! Perfect - thanks Shara!

I like how it looks similar to an industrial workbench. I am actually repainting mine now and it has the same gray bottom with natural wooden top.

@WoodshopDiaries

10 ай бұрын

I love this color-it looks a little different depending on the lighting it’s in. I’ll definitely have to use it again 😁 thanks so much for watching!

New suscriber!!

@WoodshopDiaries

10 ай бұрын

Hi & welcome! Thanks so much for following along!

Really nice. Thank you.

@WoodshopDiaries

10 ай бұрын

Thanks so much! I appreciate you watching!

That's awesome!

Very impressive.

@WoodshopDiaries

10 ай бұрын

I appreciate you watching! Thanks so much for following along!

That was excellent.

@WoodshopDiaries

10 ай бұрын

Thank you so much! I hope you have a wonderful week!

Look like I'm making a shoe bench now 😂

@WoodshopDiaries

10 ай бұрын

😆 happy building! 😉

Home Depot carry untreated 4x4 around here. I've done the gluded 4x4s for large, heavy-duty work benches. The nicest part is that they are actually 4x4.

nice🎉

@WoodshopDiaries

10 ай бұрын

Thanks so much!

Beautiful work

I'm going to build that. Thank you.

So cool. love it!

@WoodshopDiaries

10 ай бұрын

Thanks so much! I appreciate you watching!

Plugging after screws is a great way to make sure they don’t back out over time.

@WoodshopDiaries

10 ай бұрын

That's a great point!

Impressive!

@WoodshopDiaries

10 ай бұрын

Thank you so much for watching! Have a wonderful week!

Very cool project 😍😍

@WoodshopDiaries

10 ай бұрын

Thanks so much! I appreciate you watching!

Great video. Short and to the point with an awesome finished product. Just subscribed.

great project as always.

@WoodshopDiaries

10 ай бұрын

Thank you so much! I really appreciate you following along and hope you have a wonderful week!

Great build, as always! Question: Since the bench top will expand/contract across the grain, shouldn't the figure-eight fasteners have been attached to the ends of the frame so they can pivot in and out in that cross-grain direction? 🤔 Like you said, at the end of the day, this bench won't be ruined by a little cracking, and it's probably too small to even have that happen, but this seems like something that's worth calling out on a video where folks might be using it as a model for their own builds. Thanks for everything you do!

@WoodshopDiaries

10 ай бұрын

Hi! The figure 8 fasteners still allow for movement in this orientation as long as they’re not installed “straight out.” If they’re attached so they’re swiveled slightly already (but not all the way), they’ll allow for movement as there’s room for it to swivel back in and back out as needed.

Love it !👍🏻

Well done, looks like I'm going to be making some benches, my sister sent your video to me.

Hi Shara! First, First, I'd like to say how much I appreciate your videos. You explain things in such clear, easy to follow terms and the fact that you supplement them with helpful articles makes so many projects feel attainable for everyone! I have noticed that you have a handful of different shoe/storage benches under your belt. And I was wondering if you have considered building anything like the tip-out shoe benches/boxes that are more practical for people living in small spaces. Because eI would love to see you make something like that!

good job 👍👍👍

@WoodshopDiaries

10 ай бұрын

Thanks so much! I appreciate you watching!

You shoulda seen me jump as you're screwing something together and I think the orange cat jumped down. For half a sec, I was afraid something was falling on you! Anyway, super cute little bench and you did a good job explaining :D

Love this. Would love to see you do an alcove cabinet 🙏

I know you hate to paint but you make really good color choices. Nice job!

@WoodshopDiaries

10 ай бұрын

Haha thank you! It's not my usual color choice (I usually go with charcoal or black), but I'm definitely going to have to use this color again because it turned out really nice! I appreciate the compliment and I appreciate you watching!

Very nice Shara :)

@WoodshopDiaries

10 ай бұрын

Thank you! I appreciate you watching and hope you have a great weekend!

So easy and yet unique If your up for a challenge can you do a sewing machine desk with machine lift. I been trying to buy one but it cost HUNDREDS. I rather build one with my own bells and whistles 😊

@WoodshopDiaries

10 ай бұрын

That sounds like a really fun project. I may have to add that to my project list!

❤ it!!!!

Nice looking solid bench. Regarding your second thoughts on using contrasting dowels instead of hidden screws, I think it looks better with hidden screws and paint.

In a hurry, because you don’t like painting???? LOL. Great t-shirt. And great project. I have a 2 foot bench (seat) I need to make for my closet, not sure what to do for it. I think staining the top was a good decision. With the dark base, a top that was too light would not have looked as good as the stain.

@WoodshopDiaries

10 ай бұрын

Exactly--in a hurry because I hate painting haha. That and I have a million deadlines to meet--but mostly the painting part 😉 Thanks so much for watching--you are 100% right about the stain. I'm glad I gave it some color. I hope you come up with something neat to do with your closet bench! Happy building!

I love this chonky bench! I think I've used the phrase "elegant simplicity" before to describe your design vibe, but this one really exemplifies that. Love the subtle angles - especially how the end stretchers don't just follow the 10 degree slope of the legs, but they bring back a vertical element. Niiice. But I gotta cry "foul" in the painting segment - if you're "not a super-clean painter," how come you managed to paint that whole thing in a white Joe Cool bloodmobile shirt and the shirt looked just as good at the end??? If that was me, the shirt would be a camo by the time I was done... 😉😉😂😂

@WoodshopDiaries

10 ай бұрын

Thank you so much! I always love a little angle-adds some class to an otherwise boring project haha. You’re right-I’m not messy as in I get myself messy in the paint process, I’m messy in that I go back after a coat and see that I had drips and globs all over and have to sand them back down 🤣 I’d HATE to get paint on my blood drive T-shirt-I went to great lengths to give during the timeframe they were giving those away 😆

@brewster3987

10 ай бұрын

I also have a couple of favorite blood drive tee shirts, but I have neither the dexterity nor the intestinal fortitude to try to paint in them. 🤪

Nice and simple. The rounded edges might have made a nice groove pattern on the top😅

@WoodshopDiaries

10 ай бұрын

Thank you! For sure--you can certainly leave the rounded edges and make it a design element. But I always refer to grooves between boards as "crumb hoarding cracks" because they're always catching the crumbs and dust and are hard to keep clean 🙈 😂

Hi Shara! Nice, practical bench. I have a question about the "figure 8" fasteners, should they have gone on the end rails instead, or will they still allow for wood movement where you put them? I've never used them but want try them on my next project. Thanks and have a great weekend!

@WoodshopDiaries

10 ай бұрын

Hi! The figure 8 fasteners still allow for movement in this orientation as long as they’re not installed “straight out.” If they’re attached so they’re swiveled slightly already (but not all the way), they’ll allow for movement as there’s room for it to swivel back in and back out as needed.

Great job! I'm curious to know...did you also use glue when attaching pocket holed aprons or side pieces? Or, would the pocket hole screws alone be sufficient?

@WoodshopDiaries

10 ай бұрын

Hi! I didn’t use glue. I usually don’t. Glue won’t hurt if you wanted to add it, but in many cases, it really won’t help much either.

👍😊

I struggle with angles. When you started out in woodworking, did you practice angles by cutting out a piece of cardboard? Is there a better way to learn angle cutting?

@WoodshopDiaries

9 ай бұрын

I’ll be honest-I know this isn’t really much help. But I have a degree in math and I love geometry, so angles just (I guess) come kind of easy for me. So I don’t practice on anything before cutting. I just adjust the miter until I like the look and usually most of the rest of the angles will just be matched to the same degree

That looks like my saw

BTW, when I've drilled into the edge of boards, it's been very weak. How come it worked for you? Was it the angles?

@WoodshopDiaries

9 ай бұрын

Hi! I’m not sure-I drill into the edge of boards quite often without issue. I think it would depend on the type of screw, if it was predrilled, the type (and condition) of material, etc. Are your screws pulling the joints tight and is the wood splitting as you drive? These could potentially be the issue.

What state do you live in that has trouble getting 4 x 4's? Its available in Tennessee, but mostly in cedar.

What kind of sander do you use?

@WoodshopDiaries

10 ай бұрын

It’s a surfprep sander

ok how did you get your shoes to match your shirt?

I also hate painting. Don’t know if this helps, but, maybe you can paint all your your material first. Then build last

@WoodshopDiaries

10 ай бұрын

May be something to try in the future. My problem is I don't have the patience to let the paint dry as long as it should before trying to use it haha!

HELLO from France... de 8:10 à 8:12 est un vrai chien ou une statue ? Je suis fan, merci !

@WoodshopDiaries

10 ай бұрын

Hi! It’s a real dog 😊

Hi Shara i have a question when working with 2x4's do you need a special guid like the previous model that you need to put the HD guide and HD xl bit wich is thicker bit in order to drive those pocket holes? cus i dont see that guide for the 720pro can you help me with that please??

@WoodshopDiaries

10 ай бұрын

Hi! I use the normal 720 jig for 2x4s. I only use the XL jig for 4x4s. You set the bit for 1 1/2” material (which is the thickness of a 2x4). This post explains more: www.woodshopdiaries.com/how-to-use-pocket-hole-jig/

@diegomoreno2070

9 ай бұрын

@@WoodshopDiaries thanks Shara very helpful 👍🙏🏻

Alavyo