really useful. can't believe some of the dumb questions below. if you don't want it at the size shown then adjust accordingly...obviously. it is really clear what to do...love it and will save a fortune on buying one ready made. thank you to people who make the effort to put videos like this together.

I thought this was Minecraft 😂 2020 anyone

@milkhugs4676

4 жыл бұрын

Naaaa

@claytonn8326

4 жыл бұрын

Dilly yessir

@ar1eea.

4 жыл бұрын

Even I thought that this is Minecraft

@user-ns4tm1ts6t

3 жыл бұрын

Me to

You can use wooden pallets for the base. It’s cheaper

That intro was so refreshing

thank you for putting all the measurements and the amount of stuff you need

we made this in 2 days..

ive finally made mine after 3 weeks :D

@QuandaleDingle_Gaming

4 жыл бұрын

Post about it

If each piece of plywood is a bout $30, each 2x4 is $3 and the rest is Cost: 17 Sheets of Plywood = $510 47 2x4 = $141 Rails = $30 Alot of Screws = $40 Total = $721 Maybe I'll write a letter to the city so they will build one...

@tylerd.1

3 жыл бұрын

When I turn 14 next month, I’ll get a job and work non stop for a month and get 1000 dollars for this.

@cobrak1ngs

3 жыл бұрын

XT_Games who's gonna build it bro

@tylerd.1

3 жыл бұрын

Dominick Hextall me

@robertoarriola-bustamante9169

3 жыл бұрын

I just built one 1/4 pipe 6' wide 3 high and I did it Whit one 1/2 'x 4x8' and 22.00 Two 1/4 "x 4'x8' 60.00 One 3/4" x 4'x8' 30 8 - 2"x4"x 8' 5,25 each 45. 2- . 2 "x 6" x 8' 8.00 2" Screw one small box 5.00 One small 3 1/2 Box of screws 7.00 Glue 10.00 Silicone 6.00 One Metal pipe 10.00 All materials are more expensive after this PLANdemic It was abuat 210.00 materials sold it for 500.00

@bunchoboys

3 жыл бұрын

@@tylerd.1 I built one for less than 190 if you want I could tell you the materials

he makes it look so easy

really good tutorial !

Very nice, you'd be surprised how hard it is to find a nice write up like this on the 'tube. Thanks

Was it 47 or 67 pieces of wood the guy says 67 but the screen says 47 ?

@EthanHeffernan

9 жыл бұрын

idk...

@wesleyfreeman3278

9 жыл бұрын

Douglas Ward 67 i counted

thanks for helping me make a halfpipe

good video helped me alot 2 plan my halfpipe

Ouch, just the thought of splinters going into my skin from watching this.

Awesome. Thank you.

it aculy works if now have a halrf pipe thnxs so much i subscribed

@1:34, the top 2x4 facing the curve needs to be supported by another 2x4. The supporting 2x4 sits behind the top 2x4 and should be turned sideways like the other 2x4's . If you do not do do this the ramp will bow in the center.

Thank you very much!

Wouldn't it be cool to make a little bunker under the deck of a half pipe? Sweetest hangout ever

Great!

Depends on were you get your materials from

Nice presintation :)

i might do that in my backyard!!!

thankyou! :D

6' x 8' and 8' x 12' sheets of plywood. Never heard of plywood in these dimension. Where do you buy 6' and 8' Wide plywood?

@jacewroe1937

4 жыл бұрын

he means 6 feet and 8 feet dimentions you gotta convert it to inches or mm depending on where you live

Nails will back out overtime and become a hazard not only to most park skaters using tech wheels, but if you fall and slide on the surface. With screws you can counter sink them and putty over them so you have a smooth surface, and they won't back out as much over time.

will this last outside of will i have to buy a varnish or something to protect it from the weather

@Chaoskye

4 жыл бұрын

You'll have to treat the plywood as you build it with clear liquid latex paint or spray, paying special attention to all the edges of the plywood. Don't use varnish, it'll make the ramp too slippery and dangerous

@0nly1ej6

4 жыл бұрын

If you can afford the cost upfront, "epoxy garage coating" works great and looks killer. Super Durable and it adds a smooth finish that is better than Masonite in the long run, with no splinters from varnished plywood. It will make your ramp last much longer. If you don't plan to take the sections apart, it also makes the plywood transitions really smooth.

Thanks recommended

You must have so hard on this, all your sweat and blood went into this

ITS A QUARTER PIPE GENIUS

A ramp that tall needs to be much wider than 8 feet

@Burgserz yes!

Cool

how much does this cost?

@rustinator620

4 жыл бұрын

Somewhere around 1000$ but I'm guessing you don't want to know anymore because you asked 8 years ago.

@yellow-r8683

3 жыл бұрын

Rustinator lmao

@TechTutor800

3 жыл бұрын

Rustinator 🤣🤣🤣

@penek6088

3 жыл бұрын

Rustinator bruh

If you have a look at Hyezmar’s design in his Woodworking Bible, you can get a great alternative design for this.

Pause is a great tool if you must!

nice

thank you soooooooooooo much u rule

what is the radio for this?? thanks

Thanks;)

This is the easy part... but see I'm trying to build a bowl and the part I think i'd have the most trouble on would be the corners... and the curves so if you could make a follow up that'd be great but i really appreciated this video especiall ysince it gave me a better idea on how to make the sheeting and attack copings, this video is sick as Fuck and right to the point i love it

do you need masonite or skatelite or anything like that? or is plywood ok?

Ok thank you

@intangiblecube would it be half of the stuff for a quater?

program ?

I really really want to know what software did you use in making this animation video.

the rest is good apart form you can modify the sizes!

how wide and long is it???

Do you use structural or hardwood ply?

@allysmellmyfart $500 to $2000 depending on height, width, surface and many other factors

how much did it cost for you?

Its 8ft wide. So try if u can ride on that, or just make it wider then.

in the video it shows 8x 0.25 inch ply wood at 8x12 feet but he says 6x12. Which one is right?

Then you would need a lot of those plywood sides to form a circle, i'd say about 20 or so atleast and lots of short (but changing size progessively as they go up) pieces of 2x2 or 2x4 and coat it with a good few layers of thin plywood so it warps rounded.

Is it good for bmx

the cost for a halfpipe of this size is going to cost you around 800 us or £613. this is a ruff estimate it all depends on prices on lumber where you live.

i want one so bad

Hold on is it 8 pieces of .25 inch ply wood at 8x12 or 6x12?????

daora!

do u need marine plywood?

yes, if u make the "middle piece" a little bit longer:)

Which program did you use?

were do you get all of this stuff

What program do you use to make this video?

@WWEISCMPUNK well what if there isnt a local skatepark??? or what if you are trying to build a skatepark, what if you want something to practice on in your backyard???

how much is it if you want really good wood and 5 foot tool and like 2000 cm wide

which is these program you use?

Now to make a ride-in section.

it says 67pieces of 2x4 at 8ft. but you wrote down 47. Which on is it?

@izzyr7803

4 жыл бұрын

67

I was just thinking as for the coping you could form/mould a lead pipe around your bowl (I'm not a skater, would lead work?) and fill it with concrete so you dont bash it in while landing on it ;p

how to do the ramps radio?, help me please!

thank you kevin hill! lol

how high and wide would this be?

Wood prices vary by season, store, and location. The only way to find out would be to take this list of materials to your store nearest you and find out.

What program?

watch the whole video... genius.

so how many 2x4 do i need 67 or 47?

this is the cheapest way to go. If building outside you should get weather treated wood and something like skatelite as the surface but thats more expensive.

Favourite it

the halfpipe is now done ... loool ty

@TJELiamEntertainmentOfficial

7 жыл бұрын

How long is it

never heard of or even seen 1 inch thick plywood let alone a 12 foot sheet

were do you get the supplies

How much did it cost

what software this is?

@intangiblecube HOW MUCH WOULD THIS COST

how much would that cost?

how tall and wide is this?

how long is this?

I think I'm gona do that

If any one wants the CORRECT measurements, pm me and i will email you a text document with the right measurements and instructions... NOTE* THIS IS FOR A QUARTER PIPE- so if you want measurements for a halfpipe just multiply the recources by 2, do the same instructions for both ramps, and use the same process for the middle platform but find your own measurments for how long u want the ramp

how wide and long is it

and how much would that cost in average?

How long is that???

Is it 67 or 47 2x4 at 8 feet

what is the measurments?

is this do able?

around how much would this cost?

have you ever bought plywood? 98% of the time it's 4x8 foot sheets.

would a bmx bike work on this