How to build a Flight Bow - #3

Horn and wood are successfully glued together: This part is all about shaping. I let my files run hot for this. Here again are the exact measurements for height and width - measured from the center of the handle in 5 cm steps up to the tips:
0cm: 22 mm width / 30 mm height minus 4 mm for sinew layer
5cm: 20 mm width / 21 mm height minus 4 mm for sinew layer
10cm: 23.5 mm width / 17.5 mm height minus 4 mm for sinew layer
15cm: 22.5 mm width / 14 mm height minus 4 mm for sinew layer
20cm: 22 mm width / 12.5 mm height minus 4 mm for sinew layer
25cm: 20 mm width / 12 mm height minus 4 mm for sinew layer
30cm: 19.5 mm width / 10 mm height minus 2 mm for sinew layer
35cm: 18 mm width / 12.5 mm height minus 2 mm for sinew layer
40cm: 17 mm width / 12.5 mm height minus 2 mm for sinew layer
45cm: 15.5 mm width / 12.5 mm height
50cm: 9 mm width / 14 mm height
If you have any questions, just ask them in the comments. And as always: leave me a like, subscribe to my channel and share what you like. See you next time.
#bow #bowbuilding #bowmaking #archery #ottoman #woodworking #handycraft #selfmade
Artist: ZakaMusic
Track: Neon Light
Artist: Violet Vibe
Track: Memories
Artist: ZakaMusic
Track: Mirage

Пікірлер: 24

  • @cardistry_et_magie
    @cardistry_et_magie28 күн бұрын

    👍

  • @mehmeterengun368
    @mehmeterengun36810 күн бұрын

    👍👌

  • @m.bitious

    @m.bitious

    10 күн бұрын

    @@mehmeterengun368 ☺️

  • @jackobmazurkewicz
    @jackobmazurkewicz29 күн бұрын

    awesome job, I recently finished my first turkish flight composite bow

  • @m.bitious

    @m.bitious

    28 күн бұрын

    Thanks a lot, that's very kind 🙂 What's the draw weight of your flight bow? Cheers, my friend

  • @jackobmazurkewicz

    @jackobmazurkewicz

    28 күн бұрын

    @@m.bitious about 45 pounds by 28 inches, but I didn't measure. 108cm ntn. I have a Facebook page where I post posts with bows, I can't post a link, YT doesn't allow it, but it's called "Traditional bows kuba mazurkiewicz-traditional handmade bows"

  • @m.bitious

    @m.bitious

    28 күн бұрын

    @@jackobmazurkewicz thanks a lot, I will check it out

  • @m.bitious

    @m.bitious

    28 күн бұрын

    @@jackobmazurkewicz oh wow, I see you're totally into ottoman bows. That looks great. Maybe I should work on more than one at the same time, too 😀. How do you plan on coating the sinew? Cheers, my friend

  • @jackobmazurkewicz

    @jackobmazurkewicz

    28 күн бұрын

    @@m.bitious for now, I will do one at a time, i.e. I will glue the horn and place the tendons one at a time. When I gain experience, I will glue 3 at a time, this Turkish horn bow of mine is made of muflon horn bamboo and deer sinew with hide glue. the core is made of bamboo, mulberry and acacia

  • @toufikbayet2805
    @toufikbayet280529 күн бұрын

    Great Job! .My question is what are the last angels of bow?? and what are the angels of the bendding jig?? Thank you .

  • @m.bitious

    @m.bitious

    29 күн бұрын

    Hey, so far the angle at the handle is 15°, at the kasan eye 35° and between kasan and tip it is 45° - so over all slightly more than 90° - but I will increase the angles when applying the sinew. The bedding jig itself has two angles. The first one is around 40° (but a little bit more rounded), the second one is roughly 50°. I hope that helps. Cheers

  • @Couponuser16
    @Couponuser1629 күн бұрын

    How does it feel in your hands? Because wow, that has a pretty shape already. Great work, glad to see you were able to get this posted!

  • @m.bitious

    @m.bitious

    29 күн бұрын

    Hey mate, it feels surprisingly light so far. But it's it has a good balance. But compared to my first ottoman it feels really elegant (don't wanna say tiny 😀). Cheers

  • @Couponuser16

    @Couponuser16

    28 күн бұрын

    @@m.bitious I believe it! When you were scraping at 7:35 I couldn't help but think how comfortable that handle looks. And you are right, "elegant" is the right word. The lines you have on this bow where the horn + wood meet as well as the v-joint handle you showed at the very end look incredible. Just excellent & elegant work yet again! Hope your business trip went well!

  • @m.bitious

    @m.bitious

    28 күн бұрын

    @@Couponuser16 thanks a lot, my friend. And it really vibrates great. If you hold the grip and knock on a limb it vibrates just perfect. Feels like beeing pretty close to final dimensions. Even without sinew. Yeah my trip was all right. In the end we had to fly because all trains were grounded due to heavy rainfall. That sucked a bit from an ecological perspective. But anyways, I'm happy to be back home again 😊. Cheers, my friend

  • @Couponuser16

    @Couponuser16

    28 күн бұрын

    ​@@m.bitious I hear you about the frustrations, but I am glad to hear you are back home and comfortable. Hope you are having an otherwise pleasant Spring and that your Summer is sunny!

  • @m.bitious

    @m.bitious

    28 күн бұрын

    @@Couponuser16 you're totally right. Who needs good weather 😉 - family and health are way more important. Nevertheless I whish you plenty of sun and blue skies, too 🙃

  • @jacksparow25
    @jacksparow2528 күн бұрын

    See you soon❎️ See you in next life✅️

  • @m.bitious

    @m.bitious

    28 күн бұрын

    Aye, aye, captain 😉