How to build a diy english wheel tutorial - Roma Custom Bike
Автокөліктер мен көлік құралдары
Custom Cez builds an home made english wheel DIY.
In this 3 parts episode Custom Cez calls on Janusz "Polsky Rage" Wilczek for help, along with a special guest, a fan of the show that offered his services for the show's noble cause, Sergio from the FB group Rat Bike Italia.
This english build is divided in 3 parts, the construction of the frame, the manufacturing of the anvil supports and, last but not list, the construction of the lift mechanism.
CHAPTERS:
00:00 - English wheel plans animation
00:29 - Welding of the frame
01:31 - Transfer of the blue print to the stock
01:37 - Cutting of the stock
01:45 - Perforation
02:25 - Assembly and welding of the pieces
03:55 - Creation of the spacers
04:16 - Carving of the bottom support pin
05:00 - creating the wheel support
07:33 - creating the lift mechanism and working the piston and cylinder on the lathe
08:23 - CNCed a pocket on the steel tube
09:05 - Welded the tube to the main structure
10:00 - finalized the build
11:10 - tested the english wheel with a piece of aluminum sheet
Original episodes:
Part 1:
• How to build a DIY eng...
Part 2:
• How to build an englis...
Part 3:
www.youtube.com/watch?v=qmHcq...
PART ONE - BUILDING THE FRAME
Janusz brought us a bunch of tubing left over from a construction site to use to build the frame of the english wheel.
While working on the project Janusz has taken the opportunity to teach us a couple of tricks on how to weld for strength and penetration, which resulted in an actual welding competition among us.
The frame is assembled and strengthen while checking alignment and tolerances to produce a nice final result.
What did we do:
Tube cutting
Welding of the frame
Tolerances check
PART TWO - THE ANVIL SUPPORTS
In the second episode we make the support brackets that will hold the top and bottom anvils. The bottom one is designed for quick change of the wheel depending on the needed radius.
We start by cutting the necessary pieces to assemble the top bracket, three pieces made out of 5mm stock plate. We make the two holes on the side panels using a press drill with a step bit.
Then we tackle the bottom wheel support, spacers and the center pin.
What did we do:
- Transfer of the blue print to the stock
- Cutting of the stock
- Perforation
- Assembly and welding of the pieces
- Creation of the spacers
- Carving of the bottom support pin
PART THREE - THE LIFT MECHANISM
In this 3rd and final part we make the lifting mechanism for the bottom anvil.
We went to see my neighbor, Mr. Pietro, to use his lathe so we could make the piston and cylinder for the system.
Them we CNCed a pocket on the tube to fit a pin on the piston so it would travel straight up and down and finalized the build of the English wheel.
What did we do:
- worked the piston and cylinder on the lathe
- CNCed a pocket on the steel tube
- Welded the tube to the main structure
- finalized the build
- tested the english wheel with a piece of aluminum sheet
An RMPnet.com production, music by FAS.
Visit the show homepage www.romacustombike.com/
or the episode page: www.romacustombike.com/web-ser...
Check out our social platforms:
/ romacustombikeeng
/ customcezusa
/ romacustombike
/ customcez
Download the official soundrtack:
iTunes: goo.gl/WTDraf
Spotify: goo.gl/NgwgjV
Deezer: goo.gl/HGihfX
Tidal: goo.gl/4x1iyo
Google play Music: goo.gl/HuHRLB
______________________
Пікірлер: 148
A fine thread 6000 lb. trailer jack worked well for my anvil adjustment. Nice job !!
best tool ever invented speed square used one for years , as being a roofer you can also use it as a level, English wheel is also a great tool
Awesome. Thank you.
VERY NICE JOB. THANKS
Thanks bro 👍👌..i Will try this at home
Complimenti! Sei davvero forte!!! Un Mito!!!
Excellent! 👍
@CustomCez
6 жыл бұрын
Thank you Konstantin 😊
Super job
Very good creation this video
Nice video! Keep it up!
@CustomCez
7 жыл бұрын
Thanks man! Sure will try :D
Excelente 👍 gracias por compartir tus conocimientos saludos cordiales desde Cali Colombia 🇦🇲, deberían de dar medidas
GRACIAS POR COMPARTIR Y CON ESAS ROLAS MAS SE MOTIVA UNO AAAAAuuuuuu
mantap sangat berguna & manfaat👍
Nunca mas me quejare del poco espacio q tengo en mi taller!
Whooo ! Ça a l'air cool ici, gardez ce mood rock in DIY +1abo✅
I could point out a couple of things my metalwork teacher would chop my hands off for doing, but i won't. Excellent video guys.
@CustomCez
5 жыл бұрын
Hahah, i’m pretty sure I know what they are 😉 thank you very much man!
@resinductelec
4 жыл бұрын
Please do tell. This is a trade/ art/ task that is done by a dying breed. We who are trying to learn and keep it alive need all the info we can get. Even if it is just trivial or minimal this info needs to be repeated.
Good job From indonesia
PARABÉNS meus amigos... gostei muito... vcs mandam muito bem👊🇧🇷👊🇧🇷👏👏👏👏🙌🤝 viu fazer uma obrigado 🙏
@andereis2
4 жыл бұрын
Boa tarde amigo. Conseguiu fazer sua roda inglesa?
Health and safety !!!
Awesome
show galera estão de parabéns.
@CustomCez
6 жыл бұрын
+Juniele Cardozo Muito obrigado meu amigo 😊
Buongiorno :-) La Vostra passione trasuda da tutti pori ;-) Complimenti! Domanda: che software hai usato per disegnare il 3D del pezzo? Grazie mille :-) p.s. - Che marca e modello è la tua pistola/sistema di verniciatura a polvere? Thanks! ;-)
Great work you guys - and a great video! Where did you get the wheels?
@CustomCez
6 жыл бұрын
Thanks Scott :) I bought them on ebay in the United States, used for 60$
Wo bekommt man den Anreißwinkel den ihr benutzt?
Salvajada cuando tienes todas esas herramientas 🛠
muito bom vou copiar de vcs e fazer uma igual aqui no BRAZIL ok
hebat sekali,( amazing) . I am Indonesia
podpowiedzcie proszę jakie są wymiary i długości ramy ?
Nice work and good explanation thanks. I wonder which electrodes did you use; rutile or CaF2?
@CustomCez
5 жыл бұрын
Thank you very much :) I don't know about the electrodes cause by now the box has run out. I had my buddy pick them up
@wemissuamy
5 жыл бұрын
Thank you for reply. :)
muy bueno
Çok güzel
Would love to know where you sourced the anvil and rolls from?
@resinductelec
4 жыл бұрын
You can get them on ebay also harbor freight. I used an axle bearing from a 9" ford rear end and a radius self center bearing I got from tractor supply.
Great video guys, please make more DIY PS: who's the woman in the poster at the back lmao
nice music great work thank you
Where do you get the steel wheels from?
ciao, ti volevo chiedere che colore hai usato per i cerchi della tua moto. è davvero bellissimo e lo vorrei rifare sulla mia monster 600
@CustomCez
7 жыл бұрын
Ciao Giovanni, io ho usato il rosso trasparente in polvere su una base cromata. Se vuoi il rosso e' questo: verniceapolvere.it/prodotti/polveri/colori-trasparenti/rosso-trasparente-detail
@giovannirossi9923
7 жыл бұрын
+Custom Cez Fai Da Te , ci tenevo a dirti che i vostri video sono bellissimi. e mi avete fatto appassionare al mondo del custom. grazie ancora e continuate cosi👍👍👍
I built one of these about 5 years ago. I used a Ford axle bearing and a self centering bearing. I works great for small things.
where to get the wheel at?
@robertfranks3934
5 жыл бұрын
did he ever say where he got the wheels
Qual é o tamanho das peças que usam na roda inglesa.
Las medidas exactas ? Calibres, etc. ?
Bel progetto ma la ruota sotto dove si compra??
@CustomCez
6 жыл бұрын
Io l’ho prese sull’ebay americano. In italia non si trovano
Buen dia, saben en Mexico donde se pueden conseguir los rodillos o si se pueden mandar a hacer?
@CustomCez
6 жыл бұрын
Hola, Isaías, los compré en ebay.com en los Estados Unidos y los mandé a Italia, tal como soy. Es posible que desee intentar lo mismo.
@schmutzigx
6 жыл бұрын
en tun torno te los fabrican .
@ismaeldiaz1541
Жыл бұрын
@@schmutzigx hola, sabes cual serian las medidas de los rodillos para fabricar al torno.
certo che come metodo di lavoro (sicurezza) siete degli animali :D
@CustomCez
7 жыл бұрын
hahahaha si alle volte ci lasciamo trasportare :)
What are the sizes of the rollers?
This was good but I couldn’t make out the measurements, Any one knows the measurements?
like
Like
👍👍👍👍👍
Ребята, а как делали верхний и нижний ролики?
Harbor freight English wheel 230 dollars,,,others selling same one for 600,,,love mine,,
did you buy the die wheels or make them?
@columbic308
6 жыл бұрын
Jay Greig those are pretty easy to do on a lathe
@jaygreig3586
6 жыл бұрын
Yes, now all I need is a lathe...
What was the overall cost of the project?
@CustomCez
6 жыл бұрын
about 70$ for the wheels bought used on ebay usa, 25 Euros of stock metal for the cylindrical raiser (the one we worked on the lathe, had to buy a full meter of it) and the rest of the metal was scrap from a construction site.
Hi pls tell me size of STEEL TUBING width and LENGTH ROUND PIPE size
Que puedes hacer con tu herramienta mi hno ?
What's the first songs name?
Well done yer saved $500
Tem como você passar as medidas
Why not you did the anvils,it 's the most difficult part to do !
From Pakistan 🇵🇰
Bad protection = dislike but great job, I liked the rest.
Coustom Cez give me title of music from 0 to 3.12 and who sing it?
@CustomCez
6 жыл бұрын
Hey Punznies :) i wrote, played most instruments and sang all the songs in the series. The one in particular you speak of is called "Sign" I'll hopefully be able to release the album soon
@puznies0
6 жыл бұрын
thanks for the message. I did not notice that you wrote about it. really good music. I can not wait to get it to listen to the car.
@CustomCez
6 жыл бұрын
puznies0 thank you very much man!!! I really appreciate it 😊
Backsound nya enak.. band ?
Hi Guys, good idea.....but it would be much better to spend a little bit extra money for a heavier and stronger frame. I ve seen a lot of commercial english wheels, they all heavier built .....for some good reason. Hope you understand my comment right, not as a negative statement. ; -) Best
onde emcontro uma roldana grande assim
Big Ef U to PPE.
That's actually easier then it looks if you buy the wheels instead of making them yourself
Я один боялся что руку порвёт когда пятиметровый метал без зажима сверлят?
La smerigliatrice va usata con la protezione!
A parte que gira.
Always wanted English wheel, but they're too expensive.
@CustomCez
7 жыл бұрын
John, just get a set of wheels from ebay and build your own frame :)
@wanderleyapparecidovieira2282
5 жыл бұрын
Not,if you do it "
No sé por qué; pero intuyo que a esos tres gringos les encanta la marihuana!
Typowy Janusz Harlejowiec .Biżuteria musi byc przy robocie.
masamant plz
great vid for those who allways wonderd how... but just dont have the tools you have at hand... :/
@CustomCez
6 жыл бұрын
you can still do it man!!! For the lathe you can have that piston done by a machine shop, i’m sure you can find one in your area, even those people that bore motorcycle cylinders. The stuff I did on the CNC you can do by hand with a drill and a file (and a lot of patience). Everything else is straight up welding and measuring. Look into it and you’ll see that is simpler than it looks 😊
Knew there had to be a catch. Mill, lathe, DRO, none of which I have in my garage.
@CustomCez
6 жыл бұрын
jockellis you can still do it man!!! For the lathe you can have that piston done by a machine shop, i’m sure you can find one in your area, even those people that bore motorcycle cylinders. The stuff I did on the CNC you can do by hand with a drill and a file (and a lot of patience). Everything else is straight up welding and measuring. Look into it and you’ll see that is simpler than it looks 😊
@jockellis
6 жыл бұрын
Custom Cez Fai Da Te Thanks. One question: round tube offers much greater twist stability than square tube - according to a mechanical engineer friend so why are these not made of the more twist resistant round tubes.
@CustomCez
6 жыл бұрын
It’s very hard to work with round stock and it’s much harder to keep thinks square, the walls of this square tube is quite thick and plenty strong for this project.
nic
Ma le canzoni strafighe di sottofondo come si chiamano????ahahaha
Nothing says "I AM A TWAT!" more than cutting one handed with no eye protection while acting like a TOTAL TWAT for the camera than what we see at 1:41 Which by pure coincidence is where i switched off!
iam foram sri lanka 100 pasan tanku
Зачем крутым парням техника безопасности? Подумаешь, лишний шрам на черепе от болгарочного диска.... Это же круто!? Может всеже с защитой работать?
that music makes my head hurt.....
bel video ma ci sono degli errori (per evitare di farsi male) 1)manca la protezione hai flessibili per evitare che le particelle incandescenti ti finiscono in faccia o peggio negli occhi (anche se metti gli occhiali anti scheggia) 2)quando usi il trapano a colonna il pezzo sempre assicurato alla morsa ancorata sul piano per evitare che la punta si impianta e di conseguenza ferierti alle mani( se usi barre lunghe abbinato ad un sostegno )ti puoi ferire alle costolese nel caso non puoi usare una morsa vanno bene anche le staffe avvite sul ripiano 3) per rifinire la scanalatura era meglio un disco con spessore 3 mm o in alternativa un disco abrasivo lamellare perchè quello da taglio che ha uno spessore da 1 mm se si rompe ti può finire in faccia e se ti và bene ti spacchi il naso (peggio i denti) sempre se ha la protezione superiore 4) hai sbagliato ad usare il calibro. Era più comodo se misuravi il bordo del pezzo fino all'inizio foro di tutti i due i lati (era inutile misurare il diametro foro perche tanto quella misura ti interessa poco o niente) 5) per segnare le righe sulle piaste o pezzi usa una punta di metallo duto come un vecchio maschio appuntito sulla mola 6) quando usi la tela cerca di usarla per tutta la larghezza per 2 motivi principali. il primo perche la sfutti al 100% il secondo se ti si rompe non ti ferisci 7) per saldare usa guanti in crosta(e una pelle dura)che li puoi anche utilizzare anche per levigare con la levigatrice a nasto perche quelli neri che usi sono sono usati per il montaggio 8) strano che su una fresa a cnc venga usata della semplice acqua e non del refrigerante 9) il maschio era meglio se era per fori ciechi (il tuo era per fori passanti)
@CustomCez
7 жыл бұрын
si hai ragione, noi alle volte ci lasciamo andare un po :)
You're short haired home boy is zero fcuks given! 1:35 Don't give a fcuk about mah eyes 3:04 Don't give a fcuk about mah arms.
@CustomCez
6 жыл бұрын
+Bruno Bronosky that's right! Polsky Rage = zero fucks!!! 🤣🤣🤣
7:20
The video is great but then you had to go and spoil it with krap music
@CustomCez
6 жыл бұрын
I wrote and performed all the music for the show and the general consensus is that is good. Sorry you didn’t like it
@MrDirtysteve75
5 жыл бұрын
The comments were going good till the music bitch showed up. There is one in every thread.
@upyours1256
5 жыл бұрын
Diy Motorhous let me guess , you want poofter music ?
Good video but we could have used real naration and not the music
wouldn't this be....an ITALIAN wheel ? huh ? huh ? ...i'll let myself out now
@CustomCez
7 жыл бұрын
hahahaha, no ma stay and have a cold one with us :D
@ccswelding1599
7 жыл бұрын
Custom Cez Fai Da Te how'd you know i needed one. Lol
все искры от болгарки в лицо . я увидел это и дальше смотреть не стал . еще и без перчаток .
Only one guy cares about his eyes
@bertsbug
6 жыл бұрын
Yes I went there
@CustomCez
6 жыл бұрын
+Bertsbug hahahha, you are right 😊🤣🤣
Зря сапромат прогуливался
You guys don’t believe much in PPE’s do you?
no gloves ever!
nice build,but geez i cringed when you hand held the piece in the drill press. cant tell you enough to clamp your work down instead of doing that. idk how many times ive watched guys do that then the piece busts their fingers or rips flesh off. shop safety is real fellas.
Very dangerous workers....
What is with stupid music
@CustomCez
6 жыл бұрын
+Gonzalo Rios glad you like it!
only thing good here is the poster.lol.
Thanks for the demo... I'm gonna build one... but please tone down this insane and loud music or take it out entirely. It's such a put off! It ruined your video.
@notconcerningyou9487
Жыл бұрын
Then turn down your volume???
Gay music