The kids had been wanting a goal for a while now & I finally decided to build them one. I picked up a replacement net & some PVC pipe to accomplish this. I used 3" schedule 40 PVC for the main frame & 2" for the back part of the frame. Total build time took me about 3 hours or so.
Dimensions I used to make goal shown. (If I were to do this again I would add approx. 6” to the width of the frame & make the goal approx 3-4” taller.)
Front Frame:
All Piece were cut to 33.5” on outside of frame
The center frame section is 103.5”
Diagonal piece is 48”
Sides:
Diagonal is 74.25”
Bottom is 60”
Top Piece is 28”
Back of Frame:
10’ piece coupled to a 66”
Materials I used for this build:
(I sourced all the PVC materials from my local Menards. I’ll link what I can from Amazon though in case it’s more helpful for you.)
Anokey 16x7 Soccer Net amzn.to/3VzxIhG
PVC Cement & Primer amzn.to/4eznNkX
3” Sch. 40 Wye x4
3” Sch. 40 3x3x2 Sanitary Tee x2
3” Sch. 40 3x3x2 Elbow w/ Side Inlet x2
2” Sch. 40 90 degree elbows x2
2” Sch. 40 22-½ degree elbows x4
2” Sch. 40 Wye x2
2” Caps x2
2” Sch. 40 Coupler x1
2” Sch. 40 Tees x2
4” Zip Ties
Box of Self Tapping Sheet Metal Screws
3” Sch. 40 PVC Pipe (10’ long) x4
2” Sch. 40 PVC Pipe (10’ long) x5
Tools Used in this project:
Dewalt 60v Circular Saw amzn.to/3zlESP4
Dewalt 20v Impact amzn.to/3zplD77
Kid’s Favorite Soccer Ball amzn.to/3W1rbxQ
The above are my Amazon affiliate links - if you purchase anything using the links above, you're supporting this channel at no additional cost to you! Thank You for your support!