I also watched your finch nest box was terrific. Like your easy going commentary.

It's a PVA glue which is non-toxic.

beautiful nest box

This is as good as going to find someone at a Shed Place. Many times they are closed or not available! I expected better and tried to join twice now I do learn from You and do so much better in my time. Richard

@BirdSpyAustralia

7 жыл бұрын

Is the Shed Place like a "men's shed"? KZread is a great place to learn new things, last night I some how ended up watching some dance lessons for a dance that I had never heard of before and I don't dance anyway. I'm happy to hear when my videos are helping people gain knowledge as that is what most of them are made for. Thanks for watching.

@Tryinglittleleg

7 жыл бұрын

Bird Spy Australia yea its like a men's shed in Straya

@robertoduarte8768

5 жыл бұрын

566557890432100

Awesome job!👍

I'm planning on remaking this video with more information. If you have any questions please leave them as a reply to this comment and I will try and answer them in the updated videos. Thanks for watching.

@DeepakEapenKoothoor

9 жыл бұрын

I have heard that the nest box must have a cavity in the center to stop the eggs from rolling around in the cage. Is that really needed?

@ravynwolfe

9 жыл бұрын

Deepak Eapen I believe you can find inserts already made in some pet stores for that. Or you can make the floor a bit thicker and carve out an indentation. I think it is good to have a cavity to keep the baby birds from having splayed legs as well as keep the eggs from rolling.

@jromero1377

4 жыл бұрын

Dffdsee😈😈😈😈😈😈😈😈😈

I make sure the rough side of the timber is on the inside of the box and then put saw dust in all the boxes to help the chicks with grip. I have only had splayed leg on a very small number of chicks.

This design is the best I have ever seen as it keeps the young in the nest until they are ready to leave and the chicks and eggs don't roll out when the nest is inspected. What design do you think people should use?

@romeoturkiye8928

8 жыл бұрын

بس ما كان

@filupinonearts4537

7 жыл бұрын

Bird Spy Australia what glue did you used?

@robertoduarte8768

5 жыл бұрын

PELotuda

The nails are there to hold the timber in place until the glue sets, with out the glue the box would come apart. I don’t have any problems with the boxes over heating and there is a gap between the back of the box and the lid and the heat can also escape at the entrance hole. These boxes are also not designed to be used in the open so there is no need for drain holes.

I have seen many types but this one is the tops ! cheers from thailand.

you have made a nice nest of birds

please teach me to do cocktail berrding box and its measurements

Awesome ❤

Very good!!!

what type of wood and what dimensions and glue

Very interesting.

Very nice!

@BirdSpyAustralia

10 жыл бұрын

Thank you.

How you did holes brother ??

whats that white thing you re applying ?

The Box nest that i have are smaller than the one in this video I just wanna know if the size matters or not because my budgies haven't laid any eggs??

super job

thx dude my parakeets love the nest you thought me so much without any words

@SanjeevKumar-xh8lt

8 жыл бұрын

Did your budgie speak

@duanewilliams3556

8 жыл бұрын

very nice nest box.

Very very nice

Thanku

The size I use allows me to get the most out of a sheet of plywood with very little waste.

what are the dimensions on this nestbox ?

Ficou muito bom.

good job

Job well Done!

@puran.gurjarppuran.gurjar3388

4 жыл бұрын

Nice. Ji

Please share the sizes of wood peices. Appreciate

If you want me to be able to remove the ads from my videos then please click here: goo.gl/8hu8ND and Thanks for watching.

Saludos desde México

How did you make the hole of the door

easyest nesting box i ever saw on you tube cool.

why cant o buy them off ebay, it goes to the website then ebay link then no flat packs to buy

good job :)

qual a diferencia do macho pra a femia

good job. Thank you !

I want to know the measurements, length, sleeve, centimeter, width and depth

@aidansbirdvideos4355

4 жыл бұрын

Emad Rozhbayani it’s on his website

Awesome

very nice

Nice bro

Great job

excellent

Cool 😎

Thank you so much

Wouldn't the glue be toxic to the birds ? what kind of glue did u use thanks

The measurements are on the website and the link is in the Doobly Doo.

thanks a lot

What type of wood is the best to use it for nest box? sorry for bad english

@BirdSpyAustralia

10 жыл бұрын

I use plywood but any non toxic timber should be fine.

Do you have the plans for the breeding box, when you click on the www. it comes up error love the video .

@BirdSpyAustralia

4 жыл бұрын

Thanks, I've updated the link to this one www.birdspyaustralia.com/make-a-budgie-box.html

Size of the box

galing gawa mo...

can you please advice, what's the best size for cockatail boxes...

@BirdSpyAustralia

8 жыл бұрын

+Ajoy M I hope to make some more box videos soon and the cockatiel box will be one of them but a box of about 250x250x500mm should be fine.

@ajoym4213

8 жыл бұрын

+BirdSpy Aus Thank you. Also please mention the standard size of hole to be put for entry & exit. Also I am wondering whether we should keep something inside the box for the bird to climb till the hole...

size LxWxH?

um one question bro. Talking about the normal mutation budgerigar which are small in size. They do not need nesting materials to lay eggs. Now, there is a chance that the eggs will not roll properly if the base is plain right? so won't there be any problem if the base is not concave?

@BirdSpyAustralia

10 жыл бұрын

I use wood shavings or saw dust in the bottom of the boxes and the budgies will remove what they don't need. The Shavings that are left in the box by the hen stop the eggs from rolling into the corners which is what the concave is also for.

@mackielover2107

5 жыл бұрын

Farhan Muhi

What are the measurements?

@bobbondarul7448

2 жыл бұрын

Hi there Did you find out the dimensions? Thank you

Muy bueno lo que ponen

What wood do you use and isn't plywood toxic to birds because of the birds

@BirdSpyAustralia

6 жыл бұрын

+J.A.D VLOGS, I use plywood and it's safe.

@jaydondevaux9892

6 жыл бұрын

Bird Spy Australia thanks so much

Good

Спасибо !l

More box videos are on there way.

investing in a cheap compressor with a finishing nail gun will make your work a lot more easier and faster. Other then that is a nice box

Plz share box size

Dimensions of the cage??

sir if wood may get wasted soon if rain water fall over the nest house

@BirdSpyAustralia

8 жыл бұрын

+Raju Agri This box is designed to be used under cover so don't put it anywhere that water can get to it.

I loveeeeeee

Pro you need the ova glue?

@BirdSpyAustralia

9 жыл бұрын

aaron dinh Yes, you do need the PVA glue.

nice,

great work . but don't you show the the wood sizes .

@BirdSpyAustralia

6 жыл бұрын

The plans are on the website.

Is the wood to toxic? Is the glue toxic for the birds?

@BirdSpyAustralia

9 жыл бұрын

BlueberryAnd Friends No the wood and the glue is not toxic.

@emersonrivas6114

9 жыл бұрын

Ok! Just checking because I might make my own!

@nise5340

6 жыл бұрын

Emerson Rivas hiii

@robertoduarte8768

5 жыл бұрын

Pelotuda

@robertoduarte8768

5 жыл бұрын

Pelotuda i pelotudo

sir birds need houses in our house or nature house ..they must be kept in trees right

@BirdSpyAustralia

8 жыл бұрын

+Raju Agri This box is for breeding birds in an aviary. If you want a to make a box for wild bird you will first need to find out which bird are in your area and build a box that suits them.

i think it will become dirty soon, there should be some way to open it up and clean after every two three months.

size mention plz

what kind of wood did you use?

@BirdSpyAustralia

5 жыл бұрын

The information to make the box is on the website.

ela

I have have question that mother budgie can feed her children or I have to feed them

@BirdSpyAustralia

8 жыл бұрын

+Kapok Sagan, The mother will feed the young in most cases.

box mai ched ka se kare

Mejar men all sid plz

🤗🤗🤗🤗

Nice video #Bdhobbies

suuper

guzel

I would have never thought of using nails AND glue together, that's smart :3

👍👍👍👍👍

You need a small hole at the bottom (not going through the wood) so the chicks don't develop splayed feet

It's wood glue.

What is the name of this glue

@BirdSpyAustralia

7 жыл бұрын

PVA :)

one more question, my budgies aren't completely tame, does this effect their breeding

@guacamoletester4606

9 жыл бұрын

No not at all. However if you did tame you're birds and them breed them they would be less tame afterwards because of how much time they put into their chicks and not you

@spinospino100

9 жыл бұрын

Sandi Jennings This will help a lot, thank you for the info.

@AbelZachariah

8 жыл бұрын

can you show how can i make a concave pad for the eggs to be in one area.thanks. Send me you make or link on zacraj@hotmail.com

@BirdSpyAustralia

8 жыл бұрын

+Abel Zachariah Yes I can. kzread.info/dash/bejne/e4KCz6OSdJnWk6w.html :)

thank you very much for dis informative video...Bird Spy Australia... nice work... Query:NO Query…

good video.would be better if u said the measurements

10x5x5 wud be the best

If the box is to small then the budgies will not use it but you can make the boxes a little bit smaller then the one in the video. There are a lot of reasons why budgies will not breed but the main ones are they are not older enough, you may have only males are the female is infertile.

Nice vdio

🥰🥰🥰🥰🥰🥰

حلو

can I use carton???

@BirdSpyAustralia

8 жыл бұрын

+Olivia Dado, I would need more information about the carton before I can answer that question.

Is that Save?

@BirdSpyAustralia

7 жыл бұрын

Safe? Yes.

No dimensions? :(

likes