That is frickin awesome dudes. I liked how simple it was and you guys work smart.

Excellent! Just what I was looking for. Picking up my barrels this week I hope!

@craftedworkshop

7 жыл бұрын

+Dave Crabill awesome, have fun!

Nice! I hope to get my hands on a barrel like this some day.

@craftedworkshop

8 жыл бұрын

+Awesome Wood Things I saw one the other day at a local antique mall for $45. They can certainly be found relatively easily!

Best barrel video nice and simple 👌

Some nice techniques here. Can't say that I love the fact that you can see the shelf brackets though

nice work gents

Very inspired thank you 😊

@craftedworkshop

5 жыл бұрын

Thanks!

Would be cool to have your nice bottles and maybe a decanter on top of the barrel and the then glassware/ additional bottles / other bar sh*t inside. A hinged door or double door would also be tight.

Should've made a hinged door with the cut out staves!

Do you think you could have used zinc or is galvanized steel the way to go?

Best video on how to do this so far. Thank you. It seems like the people that make these for a living keep all their secrets to themselves. Question, if you wanted to make a door from the leftover staves, what changes in your measurements would to make to accommodate a hinge of some type - like maybe a piano hinge?

@craftedworkshop

7 жыл бұрын

+Paul Amador thanks! The door would be tricky for sure. A piano hinge wouldn't work since it would have to curve along the side of the barrel, and that would keep the hinge from operating correctly. I think a more standard surface mount fence-style hinge would work best.

@olekholub

4 жыл бұрын

That’s exactly what I had used for my barrel liquor cabinet. Fence hinges. You just need to bend them before installing on the barrel

@olekholub

4 жыл бұрын

That’s a link to a video to get an idea how to bend hinges kzread.info/dash/bejne/c3mHlNRtY6eZnZM.html

Nice work. the many uses of a wooden barrel are limited by one's imagination.

@craftedworkshop

7 жыл бұрын

+Blake Jon thanks!

que clase de madera se utiliza para hacer un barril.

Where'd u get shelf and whats the size of shelf? Thank u!

When you cut the door, how do you get it to maintain the bend?

@craftedworkshop

6 жыл бұрын

We didn’t add the door back, so we didn’t need to worry about it.

DO you think the bottom of the barrel would support the weight of the barrel if you put casters on to make it easier to move around? Obviously it wouldn't be sitting on the rim edge anymore.

@craftedworkshop

5 жыл бұрын

Hmm, not sure really. That’d be a lot of weight with bottles added.

How did you go about cleaning the barrel? I am going to be sanding the inside, then torching it to try and kill as much bacteria, reconstructing the barrel, and soaking in water and baking soda to hopefully remove any odor. I’m curious to know what you did though.

@Vicky-bn7jt

4 жыл бұрын

Same, ours smell really bad. But already been burnt so it’s black inside but heck you can still smell it. What did you do and did it work?

Well I guess I'm done looking for liquor cabinets. I know a guy that can supply barrels, I have a drill, and I have a saw. Looks like I have a weekend project now too.

@craftedworkshop

4 жыл бұрын

Have fun on the build!

Could you make the shelf a little bigger in diameter then use the staves that you cut out as supports so there are no metal brackets showing?

@craftedworkshop

6 жыл бұрын

The limiting factor for the shelf size is the door opening. It has to fit through the door, if that makes sense. That’s why we did what we did. Honestly, once you’ve got it loaded with bottles, the brackets are barely noticeable. You could paint them black to make them disappear even more.

@757homes

3 жыл бұрын

@@craftedworkshop where do i buy shelf? thanks

Did you do anything to the inside wood that is charred and has remnants of bourbon?

@craftedworkshop

7 жыл бұрын

+Andrew Janke nope, just vacuumed it out. This barrel had been sitting around for awhile and was totally dry.

Do I have to worry about the short staves, below and above the opening coming loose?

@craftedworkshop

6 жыл бұрын

Not as long as you tighten down the rings!

What size screws did you use for the brackets

@craftedworkshop

7 жыл бұрын

+John Coonradt jr.5 can't recall the exact length, probably around 1".

Any updates on this project? Dry out and wood separates if you dont drill holes through every single piece and place screws!

@craftedworkshop

3 жыл бұрын

This barrel was already pretty much dry, so it's held up really well. We had pushed the rings down tighter before adding the screws and everything is holding nicely.

I used a beer barrel it has been difficult getting rid of the smell of beer you have any suggestions.

@craftedworkshop

7 жыл бұрын

+John Coonradt jr.5 hmm, that's tough. I would probably seal the inside with some kind of shellac to block the smell.

@johncoonradtjr.5141

6 жыл бұрын

Crafted Workshop sorry my reply took so long , I took you suggestion Abe cover the inside with dark wood stain and that did the trick the beer smell went away quick. Thank you , John Coonradt jr.

@craftedworkshop

6 жыл бұрын

+John Coonradt jr.5 great!

@antonb9459

6 жыл бұрын

Why would you want to get rid of the beer´s smell? :D Also I think that would be nearly impossible

@DanLimbach

3 жыл бұрын

After you cut open the door and before you secure the shelf, spray vinegar all over the inside. Put a wide bowl of baking soda on the shelf and seal up the barrel opening for a couple days (you could use cling wrap). When you open it, the smell should be gone. If not, add several drops of essential oils (mint, peppermint, lemon, orange, or whatever you like) to the vinegar spray bottle, and spray the inside again, but don't use any baking soda.

البلوط برميل بار

How did you deal with the smell once opening it? My husband is mid project, looks amazing but smells so bad. Also did you seal the black on the inside with anything (where they burn the alcohol) ours is flaking...

@flyingmalkie4346

3 жыл бұрын

ive looked everywhere for the same answer, im mid project and there a few things everyone is missing out in these tutorials, its so annoying

@Vicky-bn7jt

3 жыл бұрын

Paddy Paterson my husband finished that one and it wasn’t to bad in the end (but did still smell) he’s bought another barrel and painted the inside with black, it looks amazing and stopped the smell. He bought loads of stuff to try and fix the smell on the old one but nothing worked. There isn’t a smell with this new barrel so maybe the black paint worked! Did you figure out how to stop the smell?

@bruceccorwin

3 жыл бұрын

The whiskey aroma is the best part! The inside of the barrel is charred with fire before the whiskey goes in. They don't burn the alcohol.

How did you get the first two bands off??

@craftedworkshop

7 жыл бұрын

+Josh Kitchen they just fell off since the barrel had shrunk.

Do you guys sell them?

@krisbredwell9310

5 жыл бұрын

i do, in KY

Really sweet video, thanks. Check out Woody Hyezmar’s book, the plans look really fun, google him if you want to see what I mean.

how does it smell?

@rossjones8332

4 жыл бұрын

Brian Gillick yeah this is my concern too! Did the barrel need drying out?

How many liters is this Barrell?

@bruceccorwin

3 жыл бұрын

52 gallons

Perhaps this is a dumb question, but how did you get the carriage bolts to be flush with the band? The square part of the bolt near the head won't fit in the round hole.

@gilgarcia46140

3 жыл бұрын

Good question, I am also trying to figure this out because I don't want gap between the band and underside of the bolt head.

@scottciszewski5885

3 жыл бұрын

Yes. Someone PLEASE answer this.

@gilgarcia46140

3 жыл бұрын

I ended up using a 7/16 size drill which allows a hole diameter large enough to allow the square detail to nest into. The carriage bolt head is flush against the band and I used a 5/16 washer and nut to secure the fastener on the inside.

@ryanboughton238

3 жыл бұрын

I never got a reply before I finished my project so I ended up grinding the square part round... It was time consuming and difficult so I recommend using Gil's solution.

@scottciszewski5885

3 жыл бұрын

I just did the 7/16th trick and it worked perfectly. Thanks Gil!

where do i get a barrel

@SisypheanSeas13

3 жыл бұрын

Erwin Farm & Antiques West Union, OH 45693

@SisypheanSeas13

3 жыл бұрын

Selling for $90

@p.r.6220

3 жыл бұрын

Well, im in TX