Spacers allow you to not push the bearings out of the racings....but the nut should never be cranked down that tight....i think the nut or axle would strip first...

@rickyglaser

11 ай бұрын

im confused

@joshN3230

11 ай бұрын

​@@rickyglaser...the actual ball bearings inside sit in grooves that they rotate in....pop off the shields and u can kinda see this....when ever you tighten up the axle nut it applies force to the center racing/housing of the overall bearing....the outer racing/housing is what makes makes contact with the wheel...if you where 2 keep tightening without the spacers you could theoretically push the center racing/housing through the bearing n obviously ruining it in the process but like i said idk if the nut or axle could take that kinda force..... hope that helps

@Just_SK8

11 ай бұрын

If you have the correct spacers you should be able to tighten the nut fully without it stopping the wheels from spinning. Without spacers there is huge pressure on the bearing casing. Long boarders know all about this because bearings matter much more when you're hill bombing at 70kmph

@rickyglaser

11 ай бұрын

@@Just_SK8 wow u have blown my mind! thank you!

@Just_SK8

11 ай бұрын

@@rickyglaser no worries it was all news to me until recently. In P Rods new set-up vid he says he doesn't put them in cause they just wiggle around 😄 but some guys explain the mechanics of it and it's very interesting kzread.info/dash/bejne/mYSKpLScZJDUhLQ.html

You are a good teacher Ricky. You have a very easy going style of explaining things and you explain things well. I appreciate all you do for the skating world!

@rickyglaser

11 ай бұрын

thanks!

Awesome video and setup. Very well articulated explanations and great points. I appreciate you taking your time and energy make this video for us Ricky.

@rickyglaser

11 ай бұрын

thank you for being here

I'm still on my first skateboard and can't grind yet but i will keep this in mind for the future, love your videos

Love you two! Great content Ricky!

I love krux. Used to be all I skated, but none of my local shops carry them anymore... Tensor mag-lights are my current go to

Those trucks are dope!

You can also use variable numbers of speed washers to space your wheel on the trucks.

@rickyglaser

11 ай бұрын

yeah i did know that, but i always thought that was a secondary function

😂 just commented my fav part about a board and mentioned my krux trucks than came across this. Best trucks I've had. Yew!

Ricky set up new completes exactly the same as I always do. Except my griptape cut is never as clean as that lol ❤

Love the colour scheme

i’m happy to see ricky back ❤

Went from standard team thunders to hollow light thunders, but I went back to 8.5 I'm a fan

I think skate them loose at first so bushings break in easier. Then tighten them so you dont get wheelbite etc.

The spacer is to help the bearings stay in place and roll smoothly

I use the belt sander to put artificial grooves into my trucks. Not too big of a groove just just right. you need to do the right spot or doesn’t work though.

@rickyglaser

11 ай бұрын

wow interesting

@oliverthecubesk8455

11 ай бұрын

@@rickyglaser it works good if you need groves fast I’ve mostly outgrown that I don’t do it much anymore

As a new skater that's just about to hit 1 year of skating and almost being able to ollie (😅) I did a lot of research trying to find out what spacers were for and the conclusion I found, was as well as keeping contact between the bearings so they can spin as one object to help prevent wear, it also gives more structure to the wheels to help them not implode on impact from hitting a crack or landing a jump, etc. :)

@rickyglaser

11 ай бұрын

Haha yeah, thats the theory at least , the point i tried to make in the vid is ive tried many different bearings and wheel combos with and without spacers, never have i ever noticed any differences in performance or durability 😅

@aronk3688

11 ай бұрын

@@rickyglaser Fair fair, gotta trust your expert opinion afterall :P The spacers in my wheels aren't big enough to make contact between the bearings anyway, so xD

Trick question, they never break In

I have a set of the dragons with the bronson g3 bearings, no spacers (because i had no idea what they were) and i have no issues or complaints. Ive heard to use them, not use them, heard it doesnt matter....i have no idea haha

Look up a video on spacers. They are very important. But if you change your bearings every week it probably won't matter as much. Spacers support bearings

Great video

The design on the Krux remind me of Rockos Modern Life

@rickyglaser

11 ай бұрын

Haha yesss

Bro i cannot belive you just tossed the same trucks on the exact same board as me. I feel very cool to have almost the same setup

@garrettgessell4785

11 ай бұрын

Bro and you also skate rictas? Daaaamn I feel cool. Our biggest differences is bearings. I'm skating bronson for the first time but usually reds

i hate getting new trucks! got some tensors for the first time and they are so damn loose!! always had ventures and everybody said get tensors if you want more technical trucks... the tip with the old bushings is good! might do that! thanks

Well the spacer in my light up wheels keep them lighting up but other than that I don’t know either 😂

5:55 how to break in new trucks starts here

@rickyglaser

11 ай бұрын

Thx

Spacers provide internal support so your bearings stay in place especially when they receive pressure from the side like in a powerslide. Your powerslide will also be less chattery because of reduced slop. So they should blow out less often and take less wear and tear damage with the spacers. Of course, the spacers won't save your bearings 100% of the time and they can still blow out.

new vidi, Lets goooo.

New deck day!

Man the question to whether to spacer or not is hard. I’ve been riding with spacers for ages with ceramic bones bearings. Then comes along ben debros making a video that you should ride without spacers and how much of a difference it makes like getting that revert sound which I normally seem to lack with spacers in, but when I took them off it doesn’t seem to have made much of a difference 🤔

I never touch my trucks when I get new ones. I broke so many bushings when I did fiddle with it. So I usually just don’t bother to touch them and suck it up till they tighten on there own.

I like to cut out the grip around my truck mounting holes. Dont like the way it squishes around the screw heads and makes the screws flesh with the tape.

I love and hate my Indies at the same time I love them because I’m just used to them and don’t want to change them but they are so heavy and take so much effort to pop. I really want to try thunders or maybe krux

@bassyey

6 ай бұрын

Forged hollows are light though.

@oliverthecubesk8455

2 ай бұрын

@@bassyeyI’ve gotten used to indies now and they really help my Ollie high

i'm gonna ditch spacers now, thanks Ricky!

@rickyglaser

11 ай бұрын

Proceed at own risk

@vorpalblades

11 ай бұрын

Don't.

I do the same thing when putting in hardware 😂😂

hey ricky what is your shoe size?

did you see Andy Anderson's new wheels? what do you think? will you be getting them when they come out?

@rickyglaser

11 ай бұрын

i should try them

Nice

I break mine in then hit the bushings with 303 Fiberglass, Rubber Restorer. Last a little longer.

@rickyglaser

11 ай бұрын

wow thats sounds crazy

See how far away people can hear your wheels squawk with and without spacers ? Maybe they help tune the acoustics so skateboarders can find each other from miles away.

love the scenery, somewhere in California?

@rickyglaser

11 ай бұрын

yeah its in mammoth lakes

Nothing feels worse than new shoes new board. I lose all my tricks for a good few days then it randomly clicks after all the grip chills out. I think the new shoes is what gets me to suck it’s too sticky and I can’t flick where I want

ima try it lol

@rickyglaser

11 ай бұрын

get it!

Those trucks look like the seats on Melbourne's trains

@rickyglaser

11 ай бұрын

Haha true!

I thought it was only the bushings you had to break in. What do bad trucks feel like? Besides heavy

@rickyglaser

11 ай бұрын

how trucks turn is actually an interesting science, "bad" kind of only means personal preference and how the small variables change

@4-Sight-Skating

11 ай бұрын

It's a matter of turning radius. A larger radius is usually easier for beginners, but you can't correct yourself as fast as if you have a tight turning radius... It's a give and take for stability and precision

I got brand new independent trucks and one of them is so obnoxiously squeaky idk what to do

@AdaptZehm

11 ай бұрын

I carve some wax off and put a little bit in the pivot cup, that usually solves it unless it’s the bushings

i think in theory the spacers provide rigidity and support the bearings under an axial load. in practice the difference is negligible. if bearings come with spacers i use them and if they dont then i dont lol. not much of a skater though so take that with a grain of salt

@vorpalblades

11 ай бұрын

Spacers are used to physically connect the bearings into one unit. The inner race of a bearing isn't supposed to spin.

Spacers are meant to make your bering last a little bit longer. So they're not rubbing against other hardware or the truck itself

@cgonz8

3 ай бұрын

Fuck I wish my parents had spacers; they died when I was 12

@ThatBoyDannyV.

3 ай бұрын

@@cgonz8 Typos And I'm sorry to hear about that.

Use spacers. There are 2 different sizes available.

How'd you know I got new trucks Ricky

Early to a Ricky Glaser video??

@rickyglaser

11 ай бұрын

lets goo!

Is the reason you don't skate your own custom tape that often is that you are easily distracted?

@rickyglaser

11 ай бұрын

Yeah lol

Can someone just explain do you need to countersink holes in the deck or not ?

@rickyglaser

2 ай бұрын

They are kinda pre sunk if u tighten it enough

@Shaunandshaun

2 ай бұрын

@@rickyglaser ah maybe with the next board I'll try lol

is it normal for my trucks to get stuck leaning to one side?

@rickyglaser

Ай бұрын

Yeah its normal, maybe tighten and losen them a little and lean a lot and try kinda break them in

"Christmas Complete"

Why do you skate an 8.0 with size 20 feet?

@rickyglaser

11 ай бұрын

for the vibes

@timothyquinn4919

11 ай бұрын

Out here is wild, we got mcnugget sized skaters on 9s with 60 mm all terrain wheels skating only street.

Have you seen the vid of a chick that was learning to skate and you were reacting to it? She replied back to it

@rickyglaser

11 ай бұрын

Sick! Im gonna react! Thanks for telling me

I have to admit I am slightly disappointed. I expected a video showing how to _break_ new trucks hahahah

@rickyglaser

11 ай бұрын

next time lol

i don't think i've ever seen a pair of krux in the wild. nothing against them, just never tried them. you rip obviously, jason park, nora v, ron whaley, they must be decent at least

🍕

That park kinda sucks.. like how you have to just ride off into the dirt after that rail. Kind of a bummer

@rickyglaser

11 ай бұрын

Lol yeah its kinda random, nice and peaceful tho

Why do u skate such a tiny board for your feet?

Im to late😢

@rickyglaser

11 ай бұрын

never

How to break in your new fingerboard trucks

@rickyglaser

11 ай бұрын

next vid

Dont listen to this guy. Dont tighten your trucks for a few days or so. Thats how you break them in. Maybe even just a day. Like he says bushings are weird at first. Dont tighten them down when you first get them. Wait a day.

Day 14 of asking you to do a collab with Johnny Ringer.

@rickyglaser

11 ай бұрын

Whos that?

Just microwave your trucks nothing bad will happen it breaks them in super easy

spacers are worthless

@rickyglaser

11 ай бұрын

right?

@SongJLikes

11 ай бұрын

Spacers affect wheel-roll way too much…

@vorpalblades

11 ай бұрын

Spacers are essential for the bearing to operate correctly.

@SongJLikes

11 ай бұрын

@@vorpalblades - one would think… alas.