How To Bind DJI FPV Controller 3 to DJI Avata 2 and Set Manual Mode
Тәжірибелік нұсқаулар және стиль
In this video we are taking a look at how to bind the optional DJI FPV Remote Controller 3 to the DJI Avata 2 and how to enable manual mode for the Avata 2 in the settings.
DJI Avata 2 (DJI Store) bit.ly/4cVnPCH
DJI Avata 2 (USA) amzn.to/4cNCTCm
DJI Avata 2 (CAN) amzn.to/3TZ2lMv
DJI FPV Controller 3 (USA) amzn.to/43VIJNU
DJI FPV Controller 3 (CAN) amzn.to/3TZYC1g
Links may contain Amazon Associate or other affiliate IDs. As a result, we may receive a small portion of the sale.
Become an "Air Crew" member for behind-the-scenes and bonus perks:
/ @airphotography
Пікірлер: 80
Thank you - really useful
Thank you very much, all the questions I had were answered
Thank you, very helpful.
Thanks for video!
Thanks for sharing!
very helpful
Well done my friend !
@AirPhotography
2 ай бұрын
Many thanks!!
Thank you 🙏🏽 ❤
Solid! Saved a lot of time for me. 😂
@AtortAerials
2 ай бұрын
It’s amazing how barely anyone even touches on this as if it’s assumed to just be known.
@dylancleveland
Ай бұрын
@@AtortAerials You're supposed to actually watch the tutorial videos that DJI gives you for each product. You shouldn't rely on KZreadrs to show you what they learned from those videos lol he's just remaking the exact same content, which no hate to him, I respect the hustle, but just watch DJI's videos. They're super clear.
Thanks
Nice Video Sean
@AirPhotography
2 ай бұрын
Thanks 👍
Hi can you do a video on how to fly with controller and use manual mode thanks from Scotland
obrigado :)
Great post! I ordered and just got the controller 3 to go with my Motion Controller. You mentions using taking the tension out of the left stick to do all the manual flying. What about if you don’t? (Leave the tension on the left stick.) Not totally convinced on using Manual Mode, still a bit spoiled now using the motion controller!
in the manual, it says that the connection is done from the remote to the Googles, then the Googles to the aircraft, so there are two connecting steps
There are 2 hex nuts around back of the controller grip. For me tightening the one Labelled F2 is what loosened up the Y axis behind the left stick gimbal. F1 is resistance, how hard you need to push the stick to move it. Tighten for more tension. Loosen for less
@Ferrous_Bueller
2 ай бұрын
Thanks for this comment. I was having a hell of a time until I saw your comment
@azad-11
22 күн бұрын
Thank, this is super helpful. 👍👍
Was wondering if I had to use the App to switch the pairing, turns out we don't. THanks !
it come with ELSR?
Anyone know if using mode 3 can you invert right stick please? So push forward descends and pull back ascends.
Do another DJI mini 3 pro with more features and details
hello, i set manual mode as in your tutorial but when im trying to switch between modes and set it to manual i got notification in googles "manual mode not available", why is that?
how can I check if the rc has the latest firmware?
Hey is it possible to do a distance test on the A2 The reason I sold my A1 was the distance sucked.
@silverfox74
Ай бұрын
I've seen flyers in the US reach nearly 3 miles with no signal loss and only turned back due to battery limitations.
Ive just got this controller is it best to learn the sport mode first for a good few hours before trying the M mode ?
@Ferrous_Bueller
2 ай бұрын
Nope, as long as you yell “Leroyyyyyy Jennnnnnkinns!” before taking off you’ll be just fine starting in Manual mode
@brandon9689
Ай бұрын
Sport mode does not prepare you for manual mode in any way. It is very different from flying a normal drone. I really recommend a simulator. There are plenty of training wheels on the Avata 2, But even with those you could end up wrecking your drone/ wasting DJI cares. Just use a simulator TrypFPV and DRL sim both work with this controller I use them both with it
@dylancleveland
Ай бұрын
Just fly acro in a simulator first. The only crashes I've had with my avata 2 after 4 hours in the sim have been from me testing the limits of how this drone handles turns and such.
From what I understand, I can use my RC2 with the Avata 2. Does this mean that I can use both controllers (RC2 and Motion 3) simultaneously with my both my Mini 4 Pro and an Avata 2?
@dylancleveland
Ай бұрын
You cannot do that. RC2 will not work with the Avata 2
I have the Avata 1, but the fpv controller 2 isnt in stock since forever, in a future firmware update, will the FPV controller 3 be able to connect with the avata 1
@silverfox74
Ай бұрын
The controller communicates with the goggles using bluetooth 5.0 and the the goggles communicate with the drone over O4. You can use it with an O4 system like the Air 3 and Mini 4 Pro but older drones using O3+ or lower is doubtful.
Motors wont arm for some reason with controller 3. Works fine with motion controller. Tried updating, outside in open. Any idea?
@juanobregon4261
2 ай бұрын
i have the same problem, i was with dji service on chat trying a lot of things nothing worked. they say they are going to contact me with a solution.
@daemn42
21 күн бұрын
In case anyone else runs into this.. Two things.. 1. In N and S mode on RC3 you bring both sticks down and in toward each other to start/stop the motors (same as all other DJI drones with traditional controller). Yes it's odd that MC3 and RC3 work very differently but they always have. 2. For M mode, first need to enable it in the settings as the "Custom Mode" (defaults to Sport), make sure to relieve spring tension (F2 screw) and set stickiness (F1 screw) on the throttle axis, and then you can arm/disarm using double press of start/stop. Random note.. Dunno abut others but my Avata 2 hates landing in M mode. It just spazzes out as soon as it touches the ground, so either get close to the ground and disarm to drop, or switch to N or S mode and it'll immediately start a soft landing with the throttle stick down.
If you’re flying in manual mode with that attitude, limit disabled, and you get out of control if you hit the pause button, will it save you?
@dylancleveland
Ай бұрын
yes, it swaps back to attitude and altitude/position hold
is it backword compataible with Avata 1 and google 2?
@dylancleveland
Ай бұрын
no
Shouldn't you bind the RC and goggles first before the firmware update? How do they communicate during the FW update without being bound?
@dylancleveland
Ай бұрын
You plug into a PC and use the desktop app to update.
Stick mode 4 var mi?
what fpv simulator works with Dji remote control 3?
@dylancleveland
Ай бұрын
I use Velocidrone with mine. FPV Skyline is free and also works I just didnt like it as much.
Can any one advise me ? I have a DJI drone with old control you have to insert your phone into. Can I upgrade my controller so I can get the newer controller with the screen built in ?
@AirPhotography
2 ай бұрын
Which drone do you have?
@ownyourworld
2 ай бұрын
@@AirPhotography mavic air
@silverfox74
Ай бұрын
@@ownyourworld No - totally different transmission system.
@ownyourworld
Ай бұрын
@@silverfox74 thanks
This confirmes thay the new remote controller 3 communicates with the drone VIA the goggles and not directly with the drone
@silverfox74
Ай бұрын
The RC and MC use bluetooth 5.0 to communicate with the goggles. The goggles uses O4 to communicate with the drone. The Goggles are the main transmitter in the whole system. It's all in the user manual.
@iulseyer
Ай бұрын
Is it possible to use the RC only without the goggles to fly the drone like flying in LOS?
@RC.Aviators
Ай бұрын
Not possible
@brandon9689
Ай бұрын
Hopefully the FPV3 and goggles 3 will work with other bind and fly drones once they get unlocked. The FPV2 and goggles 2 generation can already do this. It would feel like a huge downgrade if they don't eventually get this capability.
@dylancleveland
Ай бұрын
@@brandon9689 the FPV 3 has no TX of its own, so you'll have to use the goggles 3 with it most likely.
Hi How to get out of begginer mode on my avata2?
@silverfox74
Ай бұрын
In the settings menu
My RC won't go into pair mode. I power it on and then press and hold the power button and nothing happens. No beeps. Green lights just keep flashing. Any ideas?
@AirPhotography
2 ай бұрын
I’m really not sure. Tell you the truth. I would contact DJI support and see what they suggest.
@kevinbright1
2 ай бұрын
@AirPhotography thanks. It was a bad controller. Got a replacement and it works fine.
Thanks for the excellent video. Did the FPV RC 3 require updates?
@dylancleveland
Ай бұрын
it does
Didn't work for me. You didn't show how to link the remote to the drone. Do I have to press something on the Avata2 drone?
@joshuabenson6464
27 күн бұрын
Didn’t work for me either.
@willworthoberg6818
Күн бұрын
The remote does not link to the drone, it links to the goggles. Read through all these posts, and make sure your equipment is updated. Good luck.
You jumped past updating controller
@dylancleveland
Ай бұрын
he said it in the video.
Do the goggles have to be used?
@AirPhotography
2 ай бұрын
Yes, they do. You could hover the drone around well not wearing goggles, but you won’t be able to see where you’re going. it’s not compatible with remotes with a screen
@silverfox74
Ай бұрын
The goggles have to be used as the goggles communicate with the RC over bluetooth 5.0 and the drone via O4. However, you can place your goggles on your forehead and connect them to your phone via a cable or even wireless and hold your phone in your hand as the FOV which will show you exactly what the goggles see whilst holding the motion controller in the other and fly the Avata 2 in VLOS with a screen in hand. Handy when flying FPV may get you into trouble i.e. without a spotter
@rogerbivins9144
Ай бұрын
As long as the goggles are turned on, you can certainly fly the A2 line of sight without wearing them, just as with other aircraft. It is generally not as fun, and not what fpv equipment is intended for.
Can you update the RC 3 via the headset?
total bs.
@dylancleveland
Ай бұрын
how so?