How To Balance DJI Ronin SC With Canon M50 & Small Cameras
Тәжірибелік нұсқаулар және стиль
Ronin SC (DJI Store) bit.ly/2GldimT
Ronin SC (Amazon) amzn.to/2LJYm5X
In this video tutorial, I show you how to balance your Canon EOS M50 in the DJI Ronin SC. In this video, I am using the 15-45 mm kit lens. If this is your first time balancing a Ronin SC gimbal I offer up some tips to help you balance your camera quickly and easily. If you are balancing other smaller cameras or lenses such as the Sony a7 III or Sony a6400 you can still follow along as the technics are the same.
Canon EOS M50 (USA) amzn.to/2SyGyvi
Canon EOS M50 (CAN) amzn.to/2SGhwu4
Small Rig Tool (USA) amzn.to/2SOy0Ag
Small Rig Tool (CAN) amzn.to/30ZrbyX
Social Media
Website: www.airphotography.ca/
Facebook: / airphotographyblog
Instagram: / skygearphotography
#RoninSC #CanonM50 #Balancing
Пікірлер: 226
This is by far the best SC balancing video. I have balanced 3 lenses using this vid and this last 1, 11-22mm canon EF-M, just took me 2 minutes and was perfectly balanced 1st try. THANK YOU
No other video, including the one from DJI, makes any mention of the riser plate for smaller, lighter cameras. I was about to pull all my hair out... wait, I'm friggin bald... but you get me. Thank you a lot.
@PhilippDoukakis
Жыл бұрын
What would happen if you don´t use the riser and put the camera directly on the quick-release plate?
Just bought the Ronin SC. I’ve scoured KZread for video after video before I came to your video. Your video my friend is the best one I’ve seen. Thanks for the in depth yet simple instructions!
@AirPhotography
3 жыл бұрын
Thank you I’m glad you enjoyed it
Been trying to balance for the first time my DJI Ronin SC for hours now and I haven't figured it out till I watched your vid. You saved my life! HAHA! Thank you! :)
I got this gimbal today and 6 hours later I couldn’t figure it out lol and thanks to you I am ready to go out and film .. THANKS ALOT !! Keep up the good work
u really saved my life!! i have been figured like 2hours until saw your video! thanks! so the tips is adjust the 1st axis as face up, n bottom axis face front, then can balanced the position
Thank you so much for putting this one together so quick! Just ordered my SC and now It'll be a breeze to get it set. Much appreciated and glad to have a fellow Canuck providing such great content! Joe
@AirPhotography
5 жыл бұрын
Thank you always nice to see Canadian viewers watching my videos 🇨🇦👍
Spot on video exactly showing how to balance the Canon m50 with the Ronin SC. Thanks for putting this step by step video together it was extremely helpful.
i wanted to thank you for the video. this is my first gimbal and have never set one up. as soon as i followed your steps my gimbal sprung into life. im using a 50mm so i had to adjust slightly. thank you again.
you have the best video on this process hands down. the difference is how you explain the tilt balance. Thank you
Massive respect to you, it's taken hours to stabilise the ronin sc gimbal with my M50 and after watching this, i got 1st time!! Thank you sir
@AirPhotography
4 жыл бұрын
That’s great I’m glad you found it helpful
BEST TUTORIAL FOR GIMBAL !!!!!!!!! balancing the gimbal when you first get it can be very overwhelming, but this video definitely helps !
Thank you so much. I was not very happy with this procedure with the silent videos in the APP. Yours was awesome and worked first time!
best tutorial i’ve seen. thank you so much
Absolutely excellent. Nailed it first try with my m50. Thank you.
thank you for this very helpful video, everyone else is super hard to follow! Great Video
Best explanation of the balance! Thank you !
Thank you very much! This helped me better than other instruction videos and the DJI manual. Keep up the good work!
@AirPhotography
4 жыл бұрын
Thank you very much I’m glad you found it helpful
I love m50. So this is an awesome chance to figure out what to do with it. Thank you!
Thank you very much for this, really needed that riser plate to help it balance even though it doesn't look like you'll need it!
Best roninsc video by far
this was amazingly helpful
Very helpful, thanks!!!
Thank u so much!!! I learned how to use it without connecting my camera to the gimbal since Im using an EOS M6 :)
I was going to return my Ronin-SC because I thought it didn't work with my camera until I stumbled upon your video. You were very helpful, and your instructions were very clear. Thank you so much!
@AirPhotography
Жыл бұрын
Glad I could help!
Thanks for the video brother, I appreciate it! I can't wait to get some neat shots now, thanks for the great video!
I"ve watched several balancing videos and so far yours is the only one that is straight forward, simple and complete. Thank you. A big question I have is how parallax affects panos done with the Ronin. Is there a way to balance and also have most of the parallax adjusted out? Thanks again.
The best Ronin Sc video I've seen.. and have watched a lot of them.
Very useful, thank you a lot!
Thank you for the video, the explanation is easy and clear accept the pan balancing you need to focus more on it.
Awesome video! We have one on the way for our m50!
You’re freakin awesome man👏 I was about to tear my hair out I got it first try with your video! Definitely subbing
I love it... I want that ronin sc to balance the m50 for my upcoming KZread channel
Excellent video! Thank you so much :)
thanks it was great help to do the balance
Its very effective !! Tks for the tutorial !!
Great video! I have the Ronin S but this still really helped
Great, thank you very much! Make my adjustments with you and it works great!
Thanks for making this video =) now all i need is a ronin sc ;)
I watched 3 video your video was very detailed and easier to balance much appreciated
@AirPhotography
Жыл бұрын
Thank you
Thanks. Very good video. You save my time... Thank you!
great video man. big fan of your content!!
@AirPhotography
4 жыл бұрын
Thank you very much
This helped a bunch! Thank you. New subscriber.
Thanks so much for create this video because it's helpful 💪💪🤙🤙
Nice job. Thank's
Congratulations on 100K!💐🍹
@AirPhotography
5 жыл бұрын
Thank you 🙂
I got my ronin sc , and il be testing it out soon, thank you so much for the tutorial!
@FITBASTIAN
3 жыл бұрын
i have a question is it possibleto connect ith with bluetooth im tryin now, and im lost, or is it only via cable?
Thanks for this, much easier to follow than Ronins own video.
@AirPhotography
4 жыл бұрын
Thank you I’m glad you found it helpful
Very useful. Thumbs up and a thank you!
@AirPhotography
3 жыл бұрын
Thank you and thanks for watching
good guy. tnx
Great video !!! Thanks for sharing !!!!
@AirPhotography
3 жыл бұрын
Thank you
Just Perfect!
Fantastic video this helped a lot many thanks
@AirPhotography
3 жыл бұрын
Thank you I’m glad you enjoyed it
great video! Thank you very much!
@AirPhotography
3 жыл бұрын
Thank you
best tutorial
So good 😌
great tutorial
@AirPhotography
4 жыл бұрын
Thank you
I just bought a Ronin SC and it arrived yesterday. Today it completely stopped working. The app cant find it, the motors do nothing with the joystick. Totally shut out. Anyone have this issue. DJI's customer service is not responding and there is no live chat support for the Ronin, and Amazon is not taking responsibility saying it was purchased from a third party. Any help, anyone???
Very good instructional balancing video great job
@AirPhotography
5 жыл бұрын
Thank you very much
Excellent Video
@AirPhotography
3 жыл бұрын
Thank you
A6400 cheatsheet for users with standard 16-50 Power Zoom lens it ships with. These are the settings after finally working it out! The camera is borderline too light for this gimble so using the spacer is necessary to achieve true balance. The lens cap must be off, the camera must be powered on with lens extended as it would be in real world usage. TILT: 3.3 ROLL: 3.8 PAN: 1.2 You're welcome 😊
Great film showing how to balance the m50, hope you dont mind i shared a link on my channel as you explain it far better
does the lens moving in and out for different zoom levels affect balance enough to cause problems? or do you need to set the mm to whatever you want first, then balance, then shoot every time?
Which do you recommend for a sony a6100 with sigma 16mm 1.4 lens? Ronin SC or Zhiyun Crane v2?
Super useful....👊🏼👊🏼👊🏼👊🏼👊🏼👊🏼
balancing without the cable... good tutorial :D
Thanks a lot sir
Thank you mate
feels good
Nice! Can you do a comparison video for DJI Ronin SC vs Zhiyun Crane M2? Thanks!
I find that I can't seem to balance my a6400 with the 18-105mm lens. However if I only use one of the screws, I can move the camera back enough to get it balanced. Is this safe to use only one screw? Thanks!
Great vid. Quick question, any in camara setting for stable video ? THANKS
Perfectly balanced -- as all things should be.
Can you help me by telling me which lens I can use with ronin sc with mount adptor
all features and function such as slowmo time lapse also parallax shot work well on m50 + ronin ?
I have 2 questions if you don't mind. I've been looking around for an affordable one, and the other mirrorless ones seem to have problems with the M50. 1. How much clearance is there between the top of the camera and the motor that is normally behind it? Sorry, I don't know the technical names, but the when you hold it straight out in front of you, similar to how you might hold a bat pointing at the outfield, there's the motor that rotates vertically from under behind the camera, to above it. The "mirrorless camera gimbals", like the Zhiyun Crane M2, the top of the M50 it too tall to fit under that motor, thus you can't do shots that require that. Like say, a panning shot up or down, because the motor hits the camera and can't continue to rotate. So I was wondering how much clearance there is there. 2. This kind of goes along with the first question, but I wanted to see about putting a quick release plate on it. If you think that's outright a bad idea, then ignore this question completely. But this also has to do with the clearance. I see this one has 2 plates, the longer sliding plate, and one that connects the camera to the sliding plate. I assume that smaller connection plate would attach no differently than a quick release plate would. So, granted it be a good idea to add one, would it be possible to add a quick release plate on it rather than the small plate that connects the camera to the sliding plate? For reference, the quick release plates I use add 3/4 of an inch onto the bottom of the camera. Thank you.
Great advice. Thank you so much. Just got mine delivered. If there's a chance for a video showing all auto mobile phone setup /function that would be amazing.
@AirPhotography
5 жыл бұрын
I have a few other videos featuring the Ronin SC in the works 🙂
I was thinking about buying this but do you have to balance it everytime you use it? My setup in terms of camera and microphone wont change.
Will it work with sony a 6000 and sigma 16mm. Considering there is no oss in the lens is it capable for good video in a6000?
Hi! How about balancing a zoom lens? How do i balance if i want to use different focal lengths in one lens? Thanks!
Hello. I need help. does Active Track work in dji ronin sc and canon m50? do i need a cable
Great tutorial I would have dozen headaches if it wasn’t for this video. Thanks a lot
hello, i have canon 4000d can i use this gibal without conect with dlsr? thanks you
Can we use canon 90d 18-135mm lens with this item ? Please help us
Do you think the M50 and Canon 16-35mm f/4 would balance well on Ronin SC?
Hi, Can you please help. I try to balance my Ronin SC with Canon M50 + Sigma 16mm and Rode videomicro. Less than 2kg. Everything is OK except for Roll balance. Camera always rotates (a bit) from left to the right and from right to the left. Impossible to balance it perfectly. The application on my phone shows Excellent for everything however I see that ROLL balance is not that perfect like Tilt balance. Should I return the Gimbal do DJI ? or just leave it like that ? Thank you for your help !
Congrats for 100k 💐💐
@AirPhotography
5 жыл бұрын
Thank you
Best video
A question that it may decide me buying this gimbal: Can you balance more than one camera/lens and store the setup in the gimbal as a profile 1, profile 2, etc? It will be a pain if you have to doing this balancing act everytime you change a camara or you change a lens in the camera. Thank you for your videos. They are very informative.
What if my combination are M50+SmallRig Cage+Rode Shotgun Mic+Powerbank and with 18-35 sigma 1.8.. Is the Ronin SC still capable? And is it still front heavy? I've been searching for this set up but cannot find.. since im here, can you give me the answer please... im just wondering and im super curious to know.. Thank you.. sorry to disturb
I love it... I want that ronin sc for my upcoming KZread channel
@AirPhotography
5 жыл бұрын
It is a nice unit
does your ronin make sounds? Not loud but does it make some?
I just bought the Ronin SC... Thank you... I will receive it on Friday! I will use this video a 100 times :)
what is the best camera to buy to use with the ronin-sc
Can I use the Gimbal with my Olympus OMD 5 Markii?
Hi, do you probably know why rotation motor isn't working? I've updated firmware and reseted in app.
Which gimbal would u recommend for m50 users like me who likes to start with short film making and music vids. Also lenses, can dji ronin support m50 with long and heavy lenses?
Thank you! I got mine last week and I’m using the m50. I was so frustrated. This helped me so much! Will you be getting the pro kit? Would love a vid on how to use it with the m50.
@AirPhotography
5 жыл бұрын
I ordered the essential kit originally, I have the focus wheel arriving today but waiting for the rest of the parts to become available.
@Ajonra
5 жыл бұрын
Awesome! I already broke the type c adapter to micro usb trying to connect the thing to the m50. I had to order a replacement. This is definitely a journey so I’m tuned in to learn all that I can.
How do you connect your M50 to DJI Ronin CS? I try using Micro USB on my M50 camera to USB type C to the gimble but it always says that the connection is lost or so. I tired different cable but the result is the same.
i just bought a Ronin SC and still can't balance it until i see your tutorial. thanks a lot.