Having trouble to install a snap button? Follow along with me and lets learn together. Check out link below for Snap Fasteners tool kit www.amazon.com/gp/product/B07...
Жүктеу.....
Пікірлер: 118
@mackette542 жыл бұрын
OMG TWO MONTHS ..... i couldn't do it until i found you...... God bless + thank you
@MissAnnDesigns
2 жыл бұрын
I'm glad I was able to help, thank you so much for watching.
@jessortiz36122 жыл бұрын
I bought same from Amazon and instructions are nonexistent… this was very helpful. Thank you.
@MissAnnDesigns
2 жыл бұрын
Ohh, I'm glad I can help. It means a lot. Thank you for your feedback
@mary-anneburt6411 Жыл бұрын
I have tried and tried to do this but did it straightaway thank you so much
@baikontey86 Жыл бұрын
This helped me a lot. Thank you.
@rainbowsarelife58562 жыл бұрын
This is the most helpful video I’ve seen, thankyou x
@MissAnnDesigns
2 жыл бұрын
Glad you find it helpful. Thank you so much
@archaicbro Жыл бұрын
Thank you so much for the tutorial!!
@indiantinamorals579110 ай бұрын
Thank you Ann, finally you taught me how to use this, thanks Ann, love from Ireland
@MissAnnDesigns
10 ай бұрын
Hi, thank you for your feedback. I'm glad I was able to help.
@duchessjm Жыл бұрын
Thank you for this video !!! Finally I was able to use my snap fasteners 😎
@Rye_Smile Жыл бұрын
Thank you so much for this tutorial! I was very confused how this product worked but now I understand and can finally put the snaps on my piece. 💚🌟
@MissAnnDesigns
Жыл бұрын
You are very welcome. I'm glad I was able to help. Thank you for watching ❤️💕
@efinhel29072 жыл бұрын
Thank you so much for showing how to use this kit. I have tried a few time, all without success, until now that I have seen your video. Many thanks
@MissAnnDesigns
2 жыл бұрын
Aww thank you. I'm glad you find it helpful ❤️
@sandramedina84 Жыл бұрын
Thank you so much Your tutorial helped me tremendously!
@MissAnnDesigns
Жыл бұрын
I'm glad you find my video helpful. Thank you so much for watching I really appreciate your comment.
@btsarmyfangirl96712 жыл бұрын
Thank you for this video ❤️🥰
@courtneyebbeskotte19575 ай бұрын
Thank you thank you !!! This is the same one I have and I couldn’t figure out how to use it! I appreciate your demonstration! ❤
@MissAnnDesigns
5 ай бұрын
Glad I was able to help., Thanks for watching my video..
@nadiakhan42032 жыл бұрын
Same here just understood ....thank u so much
@ritusaini2040 Жыл бұрын
Thanks for tutorial, it works.
@anndollie2370 Жыл бұрын
Awesome bought set had no idea how to use! No directions! Thanks for making video!
@MissAnnDesigns
Жыл бұрын
Hi thank you so much for taking time to watch my video. You're very much appreciated..
@habeebamuhammad2604 Жыл бұрын
Thank you for this!
@user-kr4hb5np3m Жыл бұрын
Thank you so much this was so helpful
@MissAnnDesigns
Жыл бұрын
You're so welcome!
@miamilifeorlando51112 жыл бұрын
Thank you very helpful
@an8822 жыл бұрын
How do you get the pronged part to stay in? I'm pushing but it doesn't stay in but when I use the plier that part works but the female side does not go into the fabric. I'm ready to throw it out of the window.
@MissAnnDesigns
2 жыл бұрын
Hhmm, I honestly don't know what to say but if the same kit like mine, it should work fine with lightweight fabrics. I'm sorry you're having trouble with it..
@tabithahiggins5075
2 жыл бұрын
I know for a while I was convinced it couldn't possibly be the other way around but it wasn't working - try flipping the female side around?
@NinjaFalllow
Жыл бұрын
I just ordered it and I'm having the same issue. It's only needing to go through layers of fat quarter cotton fabric.
@indyindy3792
Жыл бұрын
Same here, just got mine yesterday. One side holds perfect, the opposite (female) isn’t connecting however hard I push
@pamelafay7448
Жыл бұрын
😊😊
@designwithkeisha20732 жыл бұрын
Great video! Very easy to follow along. Thanks!
@MissAnnDesigns
2 жыл бұрын
Glad it was helpful! Thank you for watching❤
@laurends8238 ай бұрын
Helpful video! Thank you for going through the steps slowly and showing the pieces up close
@MissAnnDesigns
8 ай бұрын
Thank you for showing appreciation to my video.😊 Happy to help
@afreenmomin9291 Жыл бұрын
Very helpful for me
@echo5delta Жыл бұрын
Thank you!
@kashclipzz7878 Жыл бұрын
Thank I was struggling
@gurpals.573 Жыл бұрын
Very nice thanks ❤
@minkeyenjoyer3 жыл бұрын
wow i bought the same kit from amazon! thanks this was very helpful! 👍
@MissAnnDesigns
3 жыл бұрын
Happy to help😊
@ginnulittleworld245
Жыл бұрын
Abhi kaisi chal rhi h
@Jay-ej5iv Жыл бұрын
This was truly so helpful!!!
@MissAnnDesigns
Жыл бұрын
Glad it was helpful!
@felicitadsouza670 Жыл бұрын
Thank you
@noorzunaira Жыл бұрын
Thanx for sharing
@dashiajames18822 жыл бұрын
Why it seems so difficult..?? And I totally followed the directions. This was so helpful.
@MissAnnDesigns
2 жыл бұрын
Glad you find this video helpful... It's not difficult at all. If you have questions feel free to ask. I will try yo help the best I can
@arm79153 ай бұрын
Thank u
@Riyah7632 ай бұрын
Thanks🙏🙇
@annsworld55824 жыл бұрын
nice video very helpful thanks for sharing, new friend here full support,hopefully I see you soon
@MissAnnDesigns
4 жыл бұрын
Hey Ann, thank you for your support. Stay connected.
@lizzyeapen7021 Жыл бұрын
hi thank you for the tutorial. I do have a problem. the male and the female snaps does not stay in place they just come off. So I have not been able to attach any snap button so far. Any advice?
@MissAnnDesigns
Жыл бұрын
What kind of fabric are you using? If you use this particular button it only works with lightweight non stretchy fabric. I find it a hard way when I tried to used this in satin fabric anything silky it does hold very well.
@molgybaby19762 жыл бұрын
Good presentation
@MissAnnDesigns
2 жыл бұрын
Thank You
@eileenlewis3032 жыл бұрын
Brilliant! Thank you!
@MissAnnDesigns
2 жыл бұрын
Thank you for watching
@eileenlewis303
2 жыл бұрын
@@MissAnnDesigns It was a great video, I learnt a lot from it Ann, many thanks again! 👌
@MissAnnDesigns
2 жыл бұрын
@@eileenlewis303 Aww, I'm glad I was able to help. I really appreciate you gor supporting me.
@eileenlewis303
2 жыл бұрын
@@MissAnnDesigns You're welcome Ann! 😊
@KINGTHEYORKIE3 жыл бұрын
THAnk YOU!
@MissAnnDesigns
3 жыл бұрын
No problem, thank you for watching😊
@janemorris5762 Жыл бұрын
Do I need to stabilise jersey knit fabrics under where the press studs go?
@MissAnnDesigns
Жыл бұрын
Hello Jane, I haven't tried to use this in knit fabrics so I don't really know but I think you should.
@Chancep19 Жыл бұрын
Do you think these could be used to create tear away pants? All videos I see involve sewing but I wanted to just use the pliers
@MissAnnDesigns
Жыл бұрын
You can use it but the fabric needs to be thinner. This is not for heavy duty material also I find out that this doesn't work very well with stretchy fabrics
@OmanKhaled Жыл бұрын
Thank you so much, I bought it yesterday, but was confused how the inside part is being install.. So much thank you
@MissAnnDesigns
Жыл бұрын
Happy to help. Thank you for watching
@familyman7057 Жыл бұрын
Does the tool automatically make the holes in the fabric for you as you install the buttons?
@MissAnnDesigns
Жыл бұрын
Yes, the prongs will penetrate to the fabric as you press the flier harder.
@munazahadnan9838 Жыл бұрын
Pretty cool 😎 Can I use it on Felt fabric? From where can I buy it? A stationery shop or a hardwsre shop? Please guide me
@MissAnnDesigns
Жыл бұрын
Yes you can use it in a felt fabric as long as it's not super thick. I bought this set on Amazon. Just search snap kit with flier
@appeldijk24402 жыл бұрын
Thaaaaaaaanks ❤
@tutudriod37352 жыл бұрын
If the snap fastener is all used how can I get some to buy And also can the machine be used for all Pressterd
@MissAnnDesigns
2 жыл бұрын
You can buy just the snaps itself without the pliers and it can only be use with lightweight materials
@timothypage548212 күн бұрын
I bought that same tool and snaps and couldn't get the pieces to merge when I squeezed the tool. I did it exactly as you did, but the snaps didn't close. I wonder what I am doing wrong. I feel like there's something wrong and am on the verge of returning the tool and set. When you do it, it looks so simple and easy. I will try again and report back.
@MissAnnDesigns
12 күн бұрын
Did you make sure that you install the female part in the right side. Sometimes it's kinda hard to tell if which side is right. If you installed it in a wrong way that would explain why they don't merge together. Try flipping the female side the other way.
@timothypage5482
11 күн бұрын
Followup. It looks like I was putting the pieces in backwards. I finally got it to work. Thanks, Miss Ann, for your video and suggestions.
@MissAnnDesigns
11 күн бұрын
That's good to know, thank you and you are very welcome..
@user-rr1pn6vn2p3 ай бұрын
Tq
@ToxicDeath-rh3rt24 күн бұрын
Is their a qay to do it without the pliers?
@MissAnnDesigns
24 күн бұрын
Hi, you could probably do it without the pliers but it would be really hard.
@rakeshrampally8200 Жыл бұрын
I have purchased, but it's not working
@MissAnnDesigns
Жыл бұрын
Ohh, Sorry to hear that. I wonder why?
@timothypage5482
12 күн бұрын
@@MissAnnDesigns I can't get it to work either. Sad face here.
@bertoldojhomar67972 жыл бұрын
is this good for plastic snap button?
@MissAnnDesigns
2 жыл бұрын
This is good for lightweight fabrics but I don't its good for plastic.
@anitanoecker25692 жыл бұрын
So how do you get the pronged piece to stay in? Ugh!
@MissAnnDesigns
2 жыл бұрын
If you're using the same pliers I have try one pair without any fabric see if it will stay. If not, make sure that you put the snap in the the right side where the pronged goes. You can tell by feeling it in your finger, the correct side is the one that sticks out a little bit. So just make sure that its facing up to the spikes. Hope that helps.
@AmnaAftab....81411 ай бұрын
What is the use of this iron rod...?
@MissAnnDesigns
8 ай бұрын
Hi Amna, I don't usually use it but the iron rod is intended to tighten the snap even more to the garment. If you notice the other end it has a slope that matches both female and male side. You can press them using this rod and you also need a hammer to do it.
@timothypage5482
12 күн бұрын
@@MissAnnDesigns I'm not understanding how this works. Can you explain with more detail? I just can't seem to get the tool to work even though I am doing it just as you show in the vid.
@YusufAnsari-fv8bh Жыл бұрын
Kimat kitni hai bolo
@MAHABUBALOM1502 жыл бұрын
আমি কিভাবে পাবো দাম কত
@marcelinojr.etcuban6595 Жыл бұрын
How much?
@MissAnnDesigns
Жыл бұрын
I think its less than $10
@btsarmyfangirl96712 жыл бұрын
Press button Michaine name please And price please
@MissAnnDesigns
2 жыл бұрын
Hi, I got this on Amazon, its $15 dollars for a set. If you want to check it out here's the link amzn.to/3eXu6B7, this is the exact kit I used.
@btsarmyfangirl9671
2 жыл бұрын
thanks ❤️🥰
@MissAnnDesigns
2 жыл бұрын
Your welcome
@btsarmyfangirl9671
2 жыл бұрын
🥰
@ml17123 жыл бұрын
VERY HELPFUL VIDEO BUT THE BUTTONS THAT CAME AS A PACKAGE WITH THE PRONG PLIERS ARE TOO SMALL AND DO NOT SNAP IN THE PRONG PLIERS TO HOLD IN PLACE TO INSTALL BUTTONS! MAYBE I SHOULD ASK FOR MY MONEY BACK! GOOD VIDEO THOUGH! THANK YOU!
@MissAnnDesigns
3 жыл бұрын
I'm sorry it didn't work for you, if it didn't fit then you should return them, maybe they sent you the wrong size. Mine otherwise works perfect.. Thank you for your feedback
@Mdsumon-jn1bz3 жыл бұрын
How many
@MissAnnDesigns
3 жыл бұрын
Hi, how are you doing? I'm not sure what is your question but if you ask how many snaps are in the box, its 200 pairs including the flier and the rubber ring.
@gaysy1st Жыл бұрын
Please get rid of the music, it makes it hard to hear you.
@MissAnnDesigns
Жыл бұрын
Hi! I'm sorry about that. I had been trying to get rid of that music without losing my voice over but it won't let me.
Пікірлер: 118
OMG TWO MONTHS ..... i couldn't do it until i found you...... God bless + thank you
@MissAnnDesigns
2 жыл бұрын
I'm glad I was able to help, thank you so much for watching.
I bought same from Amazon and instructions are nonexistent… this was very helpful. Thank you.
@MissAnnDesigns
2 жыл бұрын
Ohh, I'm glad I can help. It means a lot. Thank you for your feedback
I have tried and tried to do this but did it straightaway thank you so much
This helped me a lot. Thank you.
This is the most helpful video I’ve seen, thankyou x
@MissAnnDesigns
2 жыл бұрын
Glad you find it helpful. Thank you so much
Thank you so much for the tutorial!!
Thank you Ann, finally you taught me how to use this, thanks Ann, love from Ireland
@MissAnnDesigns
10 ай бұрын
Hi, thank you for your feedback. I'm glad I was able to help.
Thank you for this video !!! Finally I was able to use my snap fasteners 😎
Thank you so much for this tutorial! I was very confused how this product worked but now I understand and can finally put the snaps on my piece. 💚🌟
@MissAnnDesigns
Жыл бұрын
You are very welcome. I'm glad I was able to help. Thank you for watching ❤️💕
Thank you so much for showing how to use this kit. I have tried a few time, all without success, until now that I have seen your video. Many thanks
@MissAnnDesigns
2 жыл бұрын
Aww thank you. I'm glad you find it helpful ❤️
Thank you so much Your tutorial helped me tremendously!
@MissAnnDesigns
Жыл бұрын
I'm glad you find my video helpful. Thank you so much for watching I really appreciate your comment.
Thank you for this video ❤️🥰
Thank you thank you !!! This is the same one I have and I couldn’t figure out how to use it! I appreciate your demonstration! ❤
@MissAnnDesigns
5 ай бұрын
Glad I was able to help., Thanks for watching my video..
Same here just understood ....thank u so much
Thanks for tutorial, it works.
Awesome bought set had no idea how to use! No directions! Thanks for making video!
@MissAnnDesigns
Жыл бұрын
Hi thank you so much for taking time to watch my video. You're very much appreciated..
Thank you for this!
Thank you so much this was so helpful
@MissAnnDesigns
Жыл бұрын
You're so welcome!
Thank you very helpful
How do you get the pronged part to stay in? I'm pushing but it doesn't stay in but when I use the plier that part works but the female side does not go into the fabric. I'm ready to throw it out of the window.
@MissAnnDesigns
2 жыл бұрын
Hhmm, I honestly don't know what to say but if the same kit like mine, it should work fine with lightweight fabrics. I'm sorry you're having trouble with it..
@tabithahiggins5075
2 жыл бұрын
I know for a while I was convinced it couldn't possibly be the other way around but it wasn't working - try flipping the female side around?
@NinjaFalllow
Жыл бұрын
I just ordered it and I'm having the same issue. It's only needing to go through layers of fat quarter cotton fabric.
@indyindy3792
Жыл бұрын
Same here, just got mine yesterday. One side holds perfect, the opposite (female) isn’t connecting however hard I push
@pamelafay7448
Жыл бұрын
😊😊
Great video! Very easy to follow along. Thanks!
@MissAnnDesigns
2 жыл бұрын
Glad it was helpful! Thank you for watching❤
Helpful video! Thank you for going through the steps slowly and showing the pieces up close
@MissAnnDesigns
8 ай бұрын
Thank you for showing appreciation to my video.😊 Happy to help
Very helpful for me
Thank you!
Thank I was struggling
Very nice thanks ❤
wow i bought the same kit from amazon! thanks this was very helpful! 👍
@MissAnnDesigns
3 жыл бұрын
Happy to help😊
@ginnulittleworld245
Жыл бұрын
Abhi kaisi chal rhi h
This was truly so helpful!!!
@MissAnnDesigns
Жыл бұрын
Glad it was helpful!
Thank you
Thanx for sharing
Why it seems so difficult..?? And I totally followed the directions. This was so helpful.
@MissAnnDesigns
2 жыл бұрын
Glad you find this video helpful... It's not difficult at all. If you have questions feel free to ask. I will try yo help the best I can
Thank u
Thanks🙏🙇
nice video very helpful thanks for sharing, new friend here full support,hopefully I see you soon
@MissAnnDesigns
4 жыл бұрын
Hey Ann, thank you for your support. Stay connected.
hi thank you for the tutorial. I do have a problem. the male and the female snaps does not stay in place they just come off. So I have not been able to attach any snap button so far. Any advice?
@MissAnnDesigns
Жыл бұрын
What kind of fabric are you using? If you use this particular button it only works with lightweight non stretchy fabric. I find it a hard way when I tried to used this in satin fabric anything silky it does hold very well.
Good presentation
@MissAnnDesigns
2 жыл бұрын
Thank You
Brilliant! Thank you!
@MissAnnDesigns
2 жыл бұрын
Thank you for watching
@eileenlewis303
2 жыл бұрын
@@MissAnnDesigns It was a great video, I learnt a lot from it Ann, many thanks again! 👌
@MissAnnDesigns
2 жыл бұрын
@@eileenlewis303 Aww, I'm glad I was able to help. I really appreciate you gor supporting me.
@eileenlewis303
2 жыл бұрын
@@MissAnnDesigns You're welcome Ann! 😊
THAnk YOU!
@MissAnnDesigns
3 жыл бұрын
No problem, thank you for watching😊
Do I need to stabilise jersey knit fabrics under where the press studs go?
@MissAnnDesigns
Жыл бұрын
Hello Jane, I haven't tried to use this in knit fabrics so I don't really know but I think you should.
Do you think these could be used to create tear away pants? All videos I see involve sewing but I wanted to just use the pliers
@MissAnnDesigns
Жыл бұрын
You can use it but the fabric needs to be thinner. This is not for heavy duty material also I find out that this doesn't work very well with stretchy fabrics
Thank you so much, I bought it yesterday, but was confused how the inside part is being install.. So much thank you
@MissAnnDesigns
Жыл бұрын
Happy to help. Thank you for watching
Does the tool automatically make the holes in the fabric for you as you install the buttons?
@MissAnnDesigns
Жыл бұрын
Yes, the prongs will penetrate to the fabric as you press the flier harder.
Pretty cool 😎 Can I use it on Felt fabric? From where can I buy it? A stationery shop or a hardwsre shop? Please guide me
@MissAnnDesigns
Жыл бұрын
Yes you can use it in a felt fabric as long as it's not super thick. I bought this set on Amazon. Just search snap kit with flier
Thaaaaaaaanks ❤
If the snap fastener is all used how can I get some to buy And also can the machine be used for all Pressterd
@MissAnnDesigns
2 жыл бұрын
You can buy just the snaps itself without the pliers and it can only be use with lightweight materials
I bought that same tool and snaps and couldn't get the pieces to merge when I squeezed the tool. I did it exactly as you did, but the snaps didn't close. I wonder what I am doing wrong. I feel like there's something wrong and am on the verge of returning the tool and set. When you do it, it looks so simple and easy. I will try again and report back.
@MissAnnDesigns
12 күн бұрын
Did you make sure that you install the female part in the right side. Sometimes it's kinda hard to tell if which side is right. If you installed it in a wrong way that would explain why they don't merge together. Try flipping the female side the other way.
@timothypage5482
11 күн бұрын
Followup. It looks like I was putting the pieces in backwards. I finally got it to work. Thanks, Miss Ann, for your video and suggestions.
@MissAnnDesigns
11 күн бұрын
That's good to know, thank you and you are very welcome..
Tq
Is their a qay to do it without the pliers?
@MissAnnDesigns
24 күн бұрын
Hi, you could probably do it without the pliers but it would be really hard.
I have purchased, but it's not working
@MissAnnDesigns
Жыл бұрын
Ohh, Sorry to hear that. I wonder why?
@timothypage5482
12 күн бұрын
@@MissAnnDesigns I can't get it to work either. Sad face here.
is this good for plastic snap button?
@MissAnnDesigns
2 жыл бұрын
This is good for lightweight fabrics but I don't its good for plastic.
So how do you get the pronged piece to stay in? Ugh!
@MissAnnDesigns
2 жыл бұрын
If you're using the same pliers I have try one pair without any fabric see if it will stay. If not, make sure that you put the snap in the the right side where the pronged goes. You can tell by feeling it in your finger, the correct side is the one that sticks out a little bit. So just make sure that its facing up to the spikes. Hope that helps.
What is the use of this iron rod...?
@MissAnnDesigns
8 ай бұрын
Hi Amna, I don't usually use it but the iron rod is intended to tighten the snap even more to the garment. If you notice the other end it has a slope that matches both female and male side. You can press them using this rod and you also need a hammer to do it.
@timothypage5482
12 күн бұрын
@@MissAnnDesigns I'm not understanding how this works. Can you explain with more detail? I just can't seem to get the tool to work even though I am doing it just as you show in the vid.
Kimat kitni hai bolo
আমি কিভাবে পাবো দাম কত
How much?
@MissAnnDesigns
Жыл бұрын
I think its less than $10
Press button Michaine name please And price please
@MissAnnDesigns
2 жыл бұрын
Hi, I got this on Amazon, its $15 dollars for a set. If you want to check it out here's the link amzn.to/3eXu6B7, this is the exact kit I used.
@btsarmyfangirl9671
2 жыл бұрын
thanks ❤️🥰
@MissAnnDesigns
2 жыл бұрын
Your welcome
@btsarmyfangirl9671
2 жыл бұрын
🥰
VERY HELPFUL VIDEO BUT THE BUTTONS THAT CAME AS A PACKAGE WITH THE PRONG PLIERS ARE TOO SMALL AND DO NOT SNAP IN THE PRONG PLIERS TO HOLD IN PLACE TO INSTALL BUTTONS! MAYBE I SHOULD ASK FOR MY MONEY BACK! GOOD VIDEO THOUGH! THANK YOU!
@MissAnnDesigns
3 жыл бұрын
I'm sorry it didn't work for you, if it didn't fit then you should return them, maybe they sent you the wrong size. Mine otherwise works perfect.. Thank you for your feedback
How many
@MissAnnDesigns
3 жыл бұрын
Hi, how are you doing? I'm not sure what is your question but if you ask how many snaps are in the box, its 200 pairs including the flier and the rubber ring.
Please get rid of the music, it makes it hard to hear you.
@MissAnnDesigns
Жыл бұрын
Hi! I'm sorry about that. I had been trying to get rid of that music without losing my voice over but it won't let me.
Thank you!
@MissAnnDesigns
2 жыл бұрын
Your welcome and Thank you for watching😊