THANK YOU!!!!! I bought a pair of these snap setting pliers with those same snaps off of TEMU and the bloody things did not come with a single bit of instructions!!!!! I was this close to throwing the bloody things into the bin! Now I can use them! Thank you so very very very much! My mental health has been restored! 😂😂😂😂😂😂

@AnitaBenko

Жыл бұрын

Awww 🤩😊❤️🙏🏼 Glad this video is useful 😊✨ Thank you so much for such a kind comment ❤️

@vickymcmahon8121

11 ай бұрын

Same..😂

@anitavisram8346

9 ай бұрын

I did exactly the same. It arrived all in pieces so no explanation on what goes where. Just about to the bin them when I decided to see if I could find any help on KZread. So thank you very much. 👍

@ZippedUpKitz

9 ай бұрын

@@AnitaBenko you are very welcome! I know you made this comment 4 months ago, but I just now saw it! Thank you again for making the video…

@AnitaBenko

9 ай бұрын

@@anitavisram8346 thank you. 😊🙏🏼🌸

Thank you so much for the tutorial, it's just what I needed. I'm going to watch it a million times because I keep forgetting which one goes where and facing up or down.

@AnitaBenko

10 ай бұрын

Awww- thank you so much. ❤️🙏🏼😊🌞🌸✨

After a disasterous attempt with hairclips and pins, someone suggested using poppers for a project instead, and, not knowing how to use them, I found this. Perfection!

@AnitaBenko

6 ай бұрын

Thank you so much. 😊🙏🏼✨

Thanks for this. Hubby just bought these from aliexpress. No instructions so this video will come in very handy.

@AnitaBenko

7 күн бұрын

Aww- glad it’s useful 🌞🙏🏼😊❤️✨ Good luck 😊👍🏼

Thank you Anita. I’ve literally just bought a press stud kit with the tool from off Amazon and thought I’d watch a KZread tutorial on how to do it. Your video has been very helpful. I need to stop my phone falling out of my work trouser pocket while I’m working. 😂😂😂 I’ll refer to it again once my kit comes. Thanks again lovely.

@AnitaBenko

7 ай бұрын

Aww- so glad it’s useful. 😊🙏🏼 Hope you can fix your trouser pockets for your phone. 😊👍🏼

@donnaleeah5075

2 күн бұрын

Why don't make our pockets longer? Aarrgghh! I need to make own pants to have usable pockets! I also got this tool/snaps to keep my phone in my pocket.

Thanks for this. I wasted an hour and a few studs. Its so simple now you explained.

@AnitaBenko

Ай бұрын

Thank you so much. Glad it’s useful. 😊🙏🏼🌞✨

Thank you for these step by step explained 'how to use ...' stud thingies, soooooo helpful!! Loved it, others aren't explaining it the way you did 🙂 Glad I found your channel, x

@AnitaBenko

10 ай бұрын

Awww ❤️ thank you so much. Glad it’s helpful. 🌞✨

Just bought one of these it arrived today and no instructions 😅 so straight to KZread I come 😂 thank you so much for this video you’ve saved me a lot of stress haha 🥰

@AnitaBenko

8 күн бұрын

Awww 🥰 glad it’s useful. 😊👍🏼🌞

@Orado5

8 күн бұрын

@@AnitaBenko thank you! 🥰🥰

Thank you. I opened the box and went 'urggh, now what?'🥺 It's much easier than I expected. Great demonstration. ❤

@AnitaBenko

Жыл бұрын

You are welcome hun. 😊👍🏼🙏🏼✨🌸

Finally understand the female side! Thank you

@AnitaBenko

Жыл бұрын

😊👍🏼

Thank you for the guide. I got the snap tool kit from a store yesterday and curious as to how to use it, I found your post and yes it was very detailed and helpful. Thank you ❤

@AnitaBenko

5 ай бұрын

Thank you so much. 😊🙏🏼 Glad it’s helpful 🌞✨😊

Anita ..... Thank you very for this excellent, clear demonstration!

@AnitaBenko

Жыл бұрын

Aww 🙏🏼❤️ You are welcome 🤗

Holy crap I am also so happy to have found this video. I'm saving it for later!

@AnitaBenko

10 ай бұрын

😊❤️🙏🏼🙏🏼🙏🏼👍🏼

Thank you sooo much! Your tutorial just made my day!!

@AnitaBenko

4 ай бұрын

Thank you ❤️🙏🏼 glad it’s useful 🌞✨

Thank u for the demo. The tools I bought through Takealot also had no instructions. I was so grateful to see your demo used the same tools that I have 😊.

@AnitaBenko

11 ай бұрын

Glad it was helpful. 😊🙏🏼❤️ thank you very much. 🌞

Great video... these have such a wide range of uses... not just garments. Thank you😊

@AnitaBenko

5 ай бұрын

They have. 😊 Thank you very much. 🌞🙏🏼

Thank you for sharing the video I tried and it worked ❤

@AnitaBenko

Ай бұрын

Thank you so much. 🙏🏼I am glad it did. 😊👍🏼🌞✨

Thank you Anita.... i bought a set of these on line and they arrived today. I couldn't workout how to use them 3:56 thanks to you I can now 🎉 x

@AnitaBenko

Жыл бұрын

Awww- thank you so much. ❤️🙏🏼🙏🏼🙏🏼

I bought the same of Temu also so a big thank you for this guide and demonstration 😊

@AnitaBenko

9 ай бұрын

You are welcome. Glad it’s useful ❤️😊🙏🏼🌞

I was pulling my hair out trying to work this tool ! Thanks for restoring my sanity!

@AnitaBenko

Жыл бұрын

Aww- you are welcome 😊👍🏼✨

@mariamazza383

Жыл бұрын

Same, I’m still struggling and what’s supposed to be easy to use and yet I’ve still managed to get wrong

@AnitaBenko

Жыл бұрын

@@mariamazza383 maybe practice on some cotton fabric samples. Practice is necessary to get it right. Also make sure you attach all parts correctly.

Thank you!!! I couldn't find any other video that even had the same type of studs or explained it as well as you

@AnitaBenko

Жыл бұрын

Thank you so much. 😊🌸🙏🏼🙏🏼🙏🏼

I reckon the thing which takes practice or judgement is the thickness of the fabrics ..for example put one on a demin pocket ,i doubt it those spikes would penetrate a demin hem ..p.s. great tutorial 😊

@AnitaBenko

4 ай бұрын

These poppers are definitely for thinner fabric. 😊👍🏼 for denim I would choose different poppers. I have tutorials for thicker fabric on my channel. 😊👍🏼 thank you very much 🙏🏼

@AnitaBenko

4 ай бұрын

kzread.info/head/PLW3-Iyo5ntGKe6PrNxMJDz1N1LScayROm&si=XR2K-gcoG2CU9AlK

Very good demo, clear & concise. Thank You

@AnitaBenko

Жыл бұрын

Thank you so much. ❤️🙏🏼✨

Thank you so much. Wonderful step-by-step guide❤

@AnitaBenko

5 ай бұрын

Thank you. 😊❤️🙏🏼 Glad it’s helpful. 🌞✨😊

Absolutely BRILLIANT demo Thank You.....!!!!!!

@AnitaBenko

2 ай бұрын

Thank you very much. ❤️🌞🙏🏼✨

Thank you so much. I'm gonna write your name on my review of the pliers on TEMU bc your tutorial is so clear and short, simply the best, and the TEMU pliers are good but without instructions

@AnitaBenko

8 ай бұрын

Awww ❤️ thank you so, so much 😊🙏🏼🌞✨

Thanks for clear and precise instructions. Do these buttons come in different sizes?

@AnitaBenko

6 ай бұрын

You are welcome. 😊👍🏼 Yes they do. 😊

Thank u for explaining so clearly with male n female sides n how to exactly place it on either sides , I had bought dis tool long back n tried many times n also spoiled many buttons but thnx to u

@AnitaBenko

Жыл бұрын

Aww, thank you so much. 😊🙏🏼🙏🏼🙏🏼✨

Thank you, I just bought a very cheap kit for these from Aldi, and it didn't even have a flimsy piece of paper with instructions, it didn;t even say which part went with which pliers (it had 3) Oh well, you can't expect much for €6 , if i would used these more often I would buy something better , but I use these about once every 5 years or less

@AnitaBenko

4 ай бұрын

You are welcome. Hope it was useful tutorial 🙏🏼🙂👍🏼✨🌞

Perfect clear instructions - so helpful - appreciated

@AnitaBenko

3 ай бұрын

Thank you so much. ❤️🙏🏼 Glad it’s useful. 😊👍🏼🌞✨

Hi, I am planning on attaching these to the hem of my pants. since the fabric rolled there, do you think it will be harder to attach them?

@AnitaBenko

2 ай бұрын

It depends how thick it is. If it’s thinner than spike width- it should be fine. 😊👍🏼

Appreciate the knowledge! It is most useful!!

@AnitaBenko

4 ай бұрын

Thank you very much 🌞🙏🏼🙏🏼🙏🏼

Very good,just learn how to do it! Very straightforward and easy,thank you!

@AnitaBenko

10 ай бұрын

Thank you so much. 🙏🏼 Glad it was helpful. ❤️😊🌞✨

@Chuncy566

8 ай бұрын

​@@AnitaBenkocan you pry them apart and use them over again?

@AnitaBenko

8 ай бұрын

@@Chuncy566 unfortunately not. As spikes on a popper will be set. And it will be quite tricky to reuse them.

lovely voice you have. Now I know what t do !

@AnitaBenko

4 ай бұрын

Thank you so much. ❤️🙏🏼✨🌞

I have tried so many times to do these and they never work neatly. The metal ones male side are fine. Plastic coloured and metal female side never works. Any suggestions ?

@AnitaBenko

Жыл бұрын

Maybe try hammer on method. I found this video for you: kzread.info/dash/bejne/lGVt1pptZarbetY.html Hope it will work for you 😊🤞🏼✨

i had my kit but no instructions thank goodness for youtube that we can look it up to see how to use these tools now its practice time thank you for tuition

@AnitaBenko

5 ай бұрын

Awww ❤️ you are welcome. 🌞 good luck 😊✨👍🏼

Thank you, this how to was very helpful!!

@AnitaBenko

Жыл бұрын

😊🙏🏼🙏🏼🙏🏼

Thanks you so much for explaining in details.

@AnitaBenko

Жыл бұрын

😊❤️🙏🏼

Really great video, thank you so much

@AnitaBenko

Ай бұрын

Thank you ❤️🙏🏼 glad it’s useful 🌞✨

Thank you. I finnaly used mine after 2 years😂

@AnitaBenko

8 ай бұрын

Awww- that’s great. 😊👍🏼✨

Thank you very for the video. I was struggling to put female socket. Didn't know which way is up. After a week struggles I found your video.

@AnitaBenko

Жыл бұрын

Aww- glad to hear that hun. 😊🙏🏼🤗 Thank you for your support. ❤️

Thank you for sharing 🌹

@AnitaBenko

Ай бұрын

🌞🙏🏼❤️✨🌸

Thank you sis for sharing ❤ useful for me

@AnitaBenko

11 ай бұрын

Aww ❤️ glad to hear that. 🌞❤️🙏🏼

Thanks, any idea how to remove the snaps once they're on, I messed up on placement 😅

@AnitaBenko

4 ай бұрын

Aww- that’s a hard part 🙈 personally I haven’t removed them before. But try with pliers and small sample fabric piece I between (so it doesn’t damage original fabric) 🙂👍🏼✨

I'm buying a pretty fluffy scarf that I need for a costume I'm making but these snaps are all I can find for it, you see I need to make an infinity scarf that fits properly and tightly (not too tight obviously😂) around my neck for it but I'm afraid I won't be able to use these with how fluffy the scarf should be and I'm using shein to get them, got any tips or ideas?

@AnitaBenko

Жыл бұрын

Think small snap poppers will disappear in the scarf- and it will be difficult to find poppers in the scarf. Maybe try large metal Sew on poppers- it will be much easier for you to find and close them. (Hope I understood your question right) 😊👍🏼

thank you this was a big help!

@AnitaBenko

11 ай бұрын

You are welcome 😊👍🏼🌞

Very helpful . Thank u❤

@AnitaBenko

8 ай бұрын

Glad it’s helpful. Thank you so much. 🙏🏼❤️😊

The ring stud seperated from the spiky ring of my skirt. Do I just buy the pliers to reattach it? Or do I have to replace it?

@AnitaBenko

Жыл бұрын

If the spikes aren’t damaged then reuse them. If they are- then I would recommend to buy new set of poppers and pliers. Or use hammer on technique 😊👍🏼

@AnitaBenko

11 ай бұрын

Here is hammer on technique for these snaps: kzread.info/dash/bejne/on2jvMedhrWeYtI.html 😊

Does this work even if one side of the button has come out of the jacket? The other side is still in there and it’s a big white one and I can’t find the same kind of button.

@AnitaBenko

6 ай бұрын

Hey, is it same style popper? If not I have tutorials on other poppers: kzread.info/head/PLW3-Iyo5ntGKe6PrNxMJDz1N1LScayROm&si=k9iiIF5eP2f2OMZJ 😊👍🏼

@jamiejones426

6 ай бұрын

@@AnitaBenko I’m not sure but I’ll check. Thanks so much, I appreciate it!

@AnitaBenko

6 ай бұрын

@jamiejones426 🌞😊✨👍🏼

Thank you! I bought a kit from Walmart app and no instructions were sent with it!

@AnitaBenko

8 ай бұрын

🌞😊👍🏼✨

Can this be used for a thicker material 300gsm upwards?

@AnitaBenko

6 ай бұрын

You can try and see if it works on a sample piece. 😊👍🏼

The best! Thank you

@AnitaBenko

7 ай бұрын

Thank you so much ❤️🙏🏼✨🌞

Thank you for the help

@AnitaBenko

7 ай бұрын

😊👍🏼✨🌞

How do you keep the press female studs and the spike bottom ring from falling out of the pliers? I have these exact pliers. You make it look so simple.

@AnitaBenko

Жыл бұрын

You have to squeeze them together very hard two they attach to each other properly. Other method you can try is to hammer them on. 😊👍🏼 I might make hammer popper video soon. 😊👍🏼

@AnitaBenko

11 ай бұрын

Here is hammer on technique for these snaps: kzread.info/dash/bejne/on2jvMedhrWeYtI.html 😊

Thanku so much, I did it😊

@AnitaBenko

Ай бұрын

🌞😊🙏🏼👍🏼✨

شكرا لك وتحية لك من المغرب.

@AnitaBenko

4 ай бұрын

Thank you so much 😃🌞✨🙏🏼 hi 🇲🇦 🤩

Hi Anita, I'm looking to buy a number of sets which each include a Top, a Spike and 2 Buckles. They would normally come with 'hand tools' - 2 long implements which I would decline in favour of the plier type you use. The spikes which I've seen don't appear to have teeth but I only see one side in the promotional picture. Does this sound right to you? Also, does that plier deal with tops up to 15mm? Thanks so much.

@AnitaBenko

Жыл бұрын

Thank you for your comment. 😊🙏🏼 If you are ordering a plier and snap popper set- make sure it comes with right size snap popper nozzles. 👍🏼 (White silicone rings are the nozzles that are same size as snap poppers please see listing below): www.ebay.co.uk/itm/145012661026?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=d1EMnDVNQ7u&sssrc=2349624&ssuid=14QcTYAKTjm&var=&widget_ver=artemis&media=COPY Hope this is helpful. 😊✨ Ps. I never seen this type snap poppers to be 15mm.

@philiphughes3967

Жыл бұрын

Thank goodnes I looked at one of your other videos, Anita, as I've been looking at 'Metal Snap Poppers' for which I need those Prym pliers you demonstrate. It's all more complicated than I thought!

@AnitaBenko

Жыл бұрын

@@philiphughes3967 Prym pliers are the best. They are so universal- you can use them on so many different poppers. I love them. Definitely will fix on 15mm poppers. Here is plier playlist so it’s easy to find for you: kzread.info/head/PLW3-Iyo5ntGKe6PrNxMJDz1N1LScayROm 😊👍🏼✨

@philiphughes3967

Жыл бұрын

So very helpful, Anita. Thanks very much.

Hi Anita, I got some studs from hobby crafts that come with a plastic tool is there any difference between using pliers and the supplied tool?

@AnitaBenko

5 ай бұрын

You can do both ways 😊👍🏼

@AnitaBenko

5 ай бұрын

I have two tutorials how to attach metal studs. 😊👍🏼

@AnitaBenko

5 ай бұрын

kzread.info/dash/bejne/on2jvMedhrWeYtI.htmlsi=9vzJQuDf1odex37v

@michaeljameslawrence2965

5 ай бұрын

Cheers just butchered my elastic band used all my studs forgot to use the metal inserts as following instructions and fitted one the wrong way around after trying to get them out I tore the strap it will most likely tear eventually knowing my luck haha thanks for the video though 😮

@AnitaBenko

5 ай бұрын

@@michaeljameslawrence2965 practice on a sample fabric first. Then it will be easier. 😊👍🏼

Thank you for your help

@AnitaBenko

Жыл бұрын

You are welcome 😊🙏🏼❤️

Thank you so much

@AnitaBenko

9 ай бұрын

Thank you very much. 😊❤️🙏🏼

Thnk u soo muchhh... From Pakistan ❤

@AnitaBenko

10 ай бұрын

😊👍🏼🙏🏼❤️

Thank you

@AnitaBenko

9 ай бұрын

😊✨🌞

Can the same plier be used for different sized snaps plz

@AnitaBenko

Жыл бұрын

Hey, yes you can use same pliers for any size snaps. Snaps and snap nozzles have to be same size tho. 😊👍🏼

Brilliant help me loads knaw I can use it thank you

@AnitaBenko

Жыл бұрын

😊🌞🌸👍🏼✨

Would this work on the cuffs of a denim jacket?

@AnitaBenko

6 ай бұрын

It depends how thick is denim. 😊👍🏼

@Gorbo-ps4wf

6 ай бұрын

@@AnitaBenko thanks. What would you use for a thick denim?

@AnitaBenko

6 ай бұрын

@@Gorbo-ps4wf These: kzread.info/dash/bejne/fIKNtKeOoLPeqKg.htmlsi=sOnOFNVi-MMejwa3 Or these: kzread.info/dash/bejne/h3WusNumhKTQntI.htmlsi=GrIX0yFtEAUmFoF8 😊👍🏼

Thank you very much.

@AnitaBenko

11 ай бұрын

You are welcome. 😊👍🏼✨🌞

Thanks!!!

@AnitaBenko

3 ай бұрын

😊🙏🏼👍🏼🌞

thank you!!!

@AnitaBenko

Ай бұрын

😊🌞🙏🏼✨❤️

Can you pry them apart and use them over again, and where would I see your reply at? On here or on my email I dont know?

@AnitaBenko

8 ай бұрын

Unfortunately it’s tricky to remove metal poppers after they are installed. But it can be done- also It can leave spike marks on a garment. And don’t think you will be able to reuse them again as spikes on a poppers will be set/bent. Hope this is helpful. 😊

Hi thank you for explaining🥰🥰 however, whenever i try to push hard it doesnt place it at all.

@AnitaBenko

Жыл бұрын

Thank you very much. 😊🙏🏼 Maybe try hammer on method. I found this video for you: kzread.info/dash/bejne/lGVt1pptZarbetY.html

@moonylight8807

Жыл бұрын

@@AnitaBenko thanks a lot for your help!!🥰🥰this is really helpful. Keep going!!🥰

@AnitaBenko

Жыл бұрын

@@moonylight8807 thank you 😊🙏🏼

Thank you!

@AnitaBenko

Жыл бұрын

😊👍🏼🙏🏼✨

Where can I get this

@AnitaBenko

Жыл бұрын

Any sewing or craft shop. Or eBay/amazon. I found some for you on eBay: www.ebay.co.uk/itm/123421205295?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=3-u7rq0kTsa&sssrc=2349624&ssuid=14QcTYAKTjm&var=&widget_ver=artemis&media=COPY 😊👍🏼

কোথায় পাওয়া যাবে এই প্লাসটা

@AnitaBenko

9 ай бұрын

Metal Press Stud pliers and popper set: amzn.to/3Y0iFhY 😊👍🏼

❤❤❤

@AnitaBenko

5 ай бұрын

😊🙏🏼❤️✨🌞

I'm try this bt not working😢😢😢😢

@AnitaBenko

8 ай бұрын

Sorry to hear that. Make sure you apply right poppers together. 😊👍🏼✨

I tried it and somehow failed first time round. I managed to clip them on, it’s just that they came of my top when I unclicked them. Not sure if it’s the clippers or me

@AnitaBenko

Жыл бұрын

Make sure prongs are attached securely. If they aren’t- they will come apart unfortunately.

@AnitaBenko

11 ай бұрын

I have made hammer on technique for these snaps: kzread.info/dash/bejne/on2jvMedhrWeYtI.html Maybe this technique will work better on your blouse. 😊

Thank you.

@AnitaBenko

Жыл бұрын

😊👍🏼✨

@irenemashingaidze-siringwa2541

Жыл бұрын

@@AnitaBenko I was so frustrated trying to figure out how it works and your video was the only one I found that actually explained everything. ✅

@AnitaBenko

Жыл бұрын

@@irenemashingaidze-siringwa2541 glad it is useful. 😊🙏🏼✨👍🏼

thanks

@AnitaBenko

Жыл бұрын

😊👍🏼✨🌞

I just got mine today, but with no instructions

@AnitaBenko

5 ай бұрын

Good luck 😊👍🏼🌞✨

OK LADY, haha. You have this to PERFECTION!! I have TWO pairs of the damn thing and about a MILLION poppers!! But they keep falling out of the damn holders in the pliers, OR only one frikkin side is secured, and it’s often the jaggy bit left in the fabric!! I thought it was the pliers, first set I bought were plastic, so bought a metal pair and same thing happened with them!! So it must be ME that’s faulty, not them! He-he-he-helllllllp PLEASE!!😫😫😫😫🤣🤣

@AnitaBenko

Ай бұрын

Awwww no. Sorry to hear that. Maybe try hammer on method. I have made a tutorial on it too: kzread.info/dash/bejne/on2jvMedhrWeYtI.htmlsi=6rfgyKdeYYWPjzBo Hope this helps. 🤞🏼🤞🏼🤞🏼 🌞

@Aaaaaaaaaaaaarrrrrggghhhhhh

Ай бұрын

@@AnitaBenko Oh they’re gonna get taken to with a hammer alright……!😳🤣I have tried that too, because I got filled in caps too, which had to be hammered into the ring before snapping it on. But even the simple jagged male post won’t connect with each other, nor just the simple plain jagged female bits. I’m gonna perceiver for the next TEN MINUTES, then it’s off to the bin they go, haha. But thank you so much for your reply, take care. Lisa.💚

@AnitaBenko

Ай бұрын

@@Aaaaaaaaaaaaarrrrrggghhhhhh practice on a sample fabric and you will get there. 😊👍🏼 it’s all about a practice. I have attached thousands of poppers- that’s why it looks easy. Good luck hun. 🙃✨

@Aaaaaaaaaaaaarrrrrggghhhhhh

Ай бұрын

@@AnitaBenko Ohhhh, you’re a wee star, thank you. I shall follow your instructions, and if I can’t get it right, you’re in for 2 brand new pliers, (one only got delivered today), and a mountain of poppers!! SERIOUSLY, I will send you them!!🏴󠁧󠁢󠁳󠁣󠁴󠁿💚💚🏴󠁧󠁢󠁳󠁣󠁴󠁿

@lifebutnotasweknowit6019

10 сағат бұрын

Thank you for these, bloody Temu send them with no instructions

Great video, very clear instructions. My partner bought a kit, but she asked me to learn how to use it...I had no idea. Thanks a lot!

@AnitaBenko

3 ай бұрын

You are welcome 😊👍🏼 glad it’s useful 🌞👍🏼✨

1:43

@AnitaBenko

4 ай бұрын

😊👍🏼

Price kya h

@AnitaBenko

4 ай бұрын

Link is on description 😃👍🏼✨

,👌👍👍

@AnitaBenko

Ай бұрын

🙏🏼❤️🙏🏼

Price

@AnitaBenko

Жыл бұрын

Hello, Here is the link for pliers + snap popper set: www.ebay.co.uk/itm/195424091294?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=wfux13f5rx2&sssrc=2349624&ssuid=14QcTYAKTjm&var=&widget_ver=artemis&media=COPY

Is this tools are good

@AnitaBenko

11 ай бұрын

Yes they are. 😊👍🏼 You can buy them on Amazon: Metal Press Stud pliers and popper set: amzn.to/3Y0iFhY or I have made hammer on technique, here is the video: kzread.info/dash/bejne/on2jvMedhrWeYtI.html

@mervatmostafa6505

11 ай бұрын

Thank you

@AnitaBenko

11 ай бұрын

@@mervatmostafa6505 😊👍🏼🌞

😊😅😅

@AnitaBenko

Ай бұрын

🌞

PLZ TOOLS NAME?

@AnitaBenko

Жыл бұрын

These are metal press stud pliers. 😊👍🏼 www.ebay.co.uk/itm/285153681334?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=GpdA8cGGTfe&sssrc=2349624&ssuid=14QcTYAKTjm&var=&widget_ver=artemis&media=COPY

I tried 😭 but it is not working 😭😭😔😔😔

@AnitaBenko

Ай бұрын

Awww sorry to hear that. Practice many times. If it’s still not working try hammer on method. I have created tutorial on it too: kzread.info/dash/bejne/on2jvMedhrWeYtI.htmlsi=r1Sjfvu7lxpfuex0 Hope this is helpful. Good luck. 🌞✨😊👍🏼

The video is very clear but these pliers and studs just don’t work!! Very frustrating and a complete waste of money.

@AnitaBenko

11 ай бұрын

Thank you. 😊🙏🏼 Maybe try hammer on method: kzread.info/dash/bejne/on2jvMedhrWeYtI.html

@paulwoods7102

11 ай бұрын

@@AnitaBenko Thank you I will try that.

@AnitaBenko

11 ай бұрын

@@paulwoods7102 😊👍🏼

@juneostiadel6720

5 ай бұрын

Hi, my studs don't stay in the top, they just drop out when I move the tool. Should it be magnetic or actually clip in? Thank you, june

I bought these press pliers in the LIDL it is shitty stock broke after one time use I do not recommend the Parkside for £4,5 not worth the money

@AnitaBenko

9 ай бұрын

They are usually really good. Sorry you were unlucky with your buy. Hope you can find better quality set somewhere else. 😊👍🏼🌞

Mangwany ka adress

@AnitaBenko

4 ай бұрын

Not sure what do you mean.

Thank you so much, this def helped me. This was an exact step by step explanation on how to apply these. 🫶🏼

@AnitaBenko

Жыл бұрын

Thank you so much 🙏🏼 Glad it was helpful 😊🙏🏼✨

Thank you

@AnitaBenko

6 ай бұрын

😊✨👍🏼🙏🏼

Mangwany ka adress

@AnitaBenko

4 ай бұрын

Not sure what do you mean.