No video
How to Adjust handbrake at KIA SPORTAGE 2012 (probably the same with all Sportage from 2010-2015)
Tools:
1 flat screwdriver or a screew to lift the bottom floor in the arm rest box.
1 Long Pipe extension with 10mm tip
1 Wrench 10mm
Tools:
1 flat screwdriver or a screew to lift the bottom floor in the arm rest box.
1 Long Pipe extension with 10mm tip
1 Wrench 10mm
Пікірлер: 16
this is a great help. just saved me £150 in a garage to get a simple job done. thank you very much
Whilst sat at the school gates waiting to pick up my kid I stumbled upon a 10mm spanner in the glove box. So, I gave the instructions from this video a try.. It worked a treat - thank you. I would point out though, you DO NOT have to remove those two screws.
@andrewhennelly4582
3 жыл бұрын
Good video--I just did 2015 Manual Sportage. I did not need to open 2 bolts inside storage box. I just loosened plastic cover around handbrake handle and levered up cover around gearstick. I then adjusted handbrake about 15mm with 10mm ratcheting spanner. However i left handbrake lever poking out thru plastic cover thingy as otherwise when handbrake is adjusted down to 3 or 4 clicks it would be very difficult to get that grey plastic cover replaced around gearstick and handbrake lever
Thanks friend. Couldn’t think of a way of adjusting my Handbrake. You made it possible. Thanks 😀👍
@princetondonald3051
3 жыл бұрын
instablaster...
Wow thanks for the help my man! I’m all good now!!!
Why were the two screws removed? They were holding ?
Thank you.excellent video 👍
Hope you adjusted the shoes at rear first or you are just taking slack of cables
Good video. Thank you
If you need to have the hand real all the way up to take the cover off, wouldn't adjusting it make it way harder to put it back on?
Thanks 👍
THANKS ,, THIS IS TO ADJUST LEVER ADJUSTMENT ,, WHAT ABOUT THE HANDBRAKE SHOES...THE IN REAR ROTORS ,, HUNT SOME MORE ,,ON THE NET ,,
Se agradece, por lo menos se aprecia como se desmonta la carcasa que cubre el tensor del freno, saludos y gracias de nuevo.
@pacosarasua9173
2 жыл бұрын
Para tensar que hay que aflojar o apretar el tornillo?
@enriqueguerra7284
2 жыл бұрын
@@pacosarasua9173 hola Paco, si lo que quieres es tensar porque no te frena es apretar, en el sentido de las agujas del reloj, pero ten cuidado y ve probando con cada par de vueltas que des, así no te pasarás, saludos y suerte. Pd: cuéntanos cómo te ha ido cuando acabes.