Your every video feels like a well made documentary. Soothing voice, confident about the content. Well done mate 👍

Your instructions are so clear and well shot! Thanks!

10 on 10 for your explanation and presentation bro.Truly Standard !

Show the adjustment on Apache 200 also

You are a real MVP to us man! I had forgotten all about chain slack and was wondering why my Dominar is loosing it's 'feel' IYKWIM. But as soon as I saw this video I checked my chain and it was very very loose. You are a real life saver bro

I always look forward to your videos, they are always informative and of very high quality

I bought rtr 160 4v because of your maintenance guide video on 200 4v

@jaskaransinghvirdi9071

5 жыл бұрын

I need that video's link bro pls 😀 I also have 160 4v

Cheers man! Very nice video, now I adjust the chain slack, chain cleaning and lubing by myself. I used to depend on nearby workshop regularly.

Great video man. I was looking to adjust chain of my motorcycle.

Brilliantly explained brother...

Thank you very much for this video, it made maintaining my Domi that much easier. 😊

Thanks for this clear and useful explanation....

Very simple, informative video. Thankyou

It's been a long time I got excited after seeing notifications...

MindBlowing Video On Adjustment .......loved the Simplicity of your Video

Dude, Very Informative and Quality Work. Keep it up Bro.

Mahn.... Thnx for the video....... I waited for this long......

Much needed video 🤩

The 1st video i hv ever seen wth proper information & process about chain slack and its solution......one of the most productive video....keep it up....😇😇😇

Dude, I really really like your videos. It's to the point, not rushed or anything, and it's damn clear. The way the video is edited, shot, and complied seems nothing less than artistic. I have and will continue recommending your videos to people. Keep up the amazing work!

@thesportztourer

3 жыл бұрын

Thanks a lot for appreciating the efforts; really means a lot to me 😊

Nicely explained video

Great as usual

Best explanation and demonstration I've seen on this subject. Top marks. 10/10.

@thesportztourer

3 ай бұрын

Thanks a lot for appreciating the efforts ❤️

This method is perfect and it should be Mandatory in all chain drive vehicles, because this is very easy method for loose and tight. Please share directions if you have for standard bikes chain adjusters can be modified with this nethod

Very informative 👍

Bro I love your explainations man , you rock :)

@thesportztourer

3 ай бұрын

Thank you so much 😊

Finally the video I was waiting for. But would appreciate if the same would be done on RTR 200

Very nice !

good job brother👍

Very informative...

Well explained as usual. I am just going through your videos nowadays as a hobby. Can you also do the same slack adjustment video on an RE classic?

Lovely video mate, recently started doing the slack adjustment/check myself on my 390 Duke. Only doing it with a 17mm open spanner on the axle nut side. Hope to get a companion ring or socket for the bolt side. Quick question, can you share a link to those disposable gloves? I saw a few on Amazon but reviewers complain of easy tearing. The ones you're wearing seem a bit more up to the task :)

Nice one 👍 plz make a video on chain over lap adjustment

Bro which bulb is recomended in fz-s ver2.0 for better visibility

I have been using open head spanner to loosen and tighten the axle bolt, can you mention why it is not recommended or is their any issues if I continue using it ? Thanks

Ultimate Vedio brother. Really enjoyed your entire video. Wonderful Vedio. If possible brother, kindly arrange to make a review of Hero X trime 200 R.

Happy 70th Republic day🇮🇳 Good suggestion to keep vehicle in Gear while matching bothside axle nut positions!!

Can you please explain about the frozen link. I adjusted my Dominar’s chain but at one plce chain gets tighter and rest of the links are smooth

How do i know that i havnt overtightened rear axle nut without using torque wrench? (as i dont have one)

Nice video sir

Have been waiting for the fully synthetic engine oil video...

Hi bro, on seeing the bulb in last part, I remembered a question. The 160 4v carb version does not support a 60w bulb, can you please let me know why, do I have to change the whole wiring or anything else??

nice video 📹 👍🏼

which is the best tool kit for NS 200?

Every video of your is so informative. Someday m gonna be an engineer of my own bike. Idk if u'll believe or not, I was confused between the FZ and Apache. Finally chose Apache. Well I could only afford 160 4V single disk. I would really appreciate if you could make some more similar videos on ur RTR 200. Looking forward for more informative videos. Love from HYD.

@thesportztourer

5 жыл бұрын

Thanks a lot Zeeshan for the wonderful words of motivation.. Definitely more videos on RTR 👍

Thanks I have 2017 Yamaha r3

Great voice and upto the benchmark of professional narrators bro.. content is really great! Better camera shots bland color correction will make this look like official BBC auto show tip

@thesportztourer

3 жыл бұрын

Thank you so much for appreciating the efforts, really means a lot to me 😊 Have you checked these: 1. kzread.info/dash/bejne/jJqm08mcmJiffZs.html 2. kzread.info/dash/bejne/h5ds062zlca_gqQ.html

If it is either on the tighter side or looser side, does it affect the pickup of the bike?

I dont have any space to tighten My rtr 200 chain. What to do now ? Do i need to replace my chain?

Can you make similar video for new design?

How to check the replacement time of chain set?

How much torque we should apply on that nut? I don't have any torque wrench. Please make a detail video about that

How to know torqe range when tightening

N .....Happy Republic Day 2 u and your family....

What torque wrench do you recommend?

Where do i get torque wrench for 98nm

Can u do video regarding frozen links

Please do it for Apache rtr 200 as well..

Please make video on chain slack adjustment on rtr 200

You noted the torque recommendation as 98nm. How did you get the number? Do you have a workshop manual? Kindly share a link so I can purchase the same.

As always..👌👌

Can I Install Dominar Slipper Cluth On Pulsar RS 200

20 to 30 mm chain slack is from bottom chain to swing arm?

Hiii bro happy republic day 🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳

Nice vdo.....i hav a problm...my bike chain slack is uneven...wat i nid to do to correct it....and my sprockets n chain are new...plz help

Loose chain can effect on gear shifting ? Means gear shifting getting hard.

Please post apache 200 chain adjustment video

Very nice video man! Tons of info... But one question at 1:30 the measurement of 20-30mm is starting from bottom end of the chain and at what point is the top indicator ending? Thanks in advance...

@thesportztourer

3 жыл бұрын

Hi! First you can begin by roughly selecting a center point in between the front and rear sprocket like shown in the video, from there try to force the chain down and up (vertically), the total distance from bottom point to top point is your chain slack. Thanks a lot for valuing and appreciating the content on the channel, really means a lot to me 😊 I have explained something similar but in more detail over here: kzread.info/dash/bejne/jJqm08mcmJiffZs.html

Hi buddy I have a ns200 I had a question that when we measure the chain slag does it need to be from the idle position to just upward or both upward and downward the

@thesportztourer

3 жыл бұрын

Hi Bosco! You have to measure it from top most position to bottom most position; also make sure the slag is measured roughly at the center between the two sprocket with wheels touching the ground.

@boscomendes9593

3 жыл бұрын

@@thesportztourer thank you I'll surely try that I'm also from pune please check you Instagram I have messaged you if possible we can meet up

Can you make a video on adjustment of rear suspension of the apache 200

@thesportztourer

5 жыл бұрын

Will try to, need to get that special tool for adjustment 😊

@vivianrichards565

5 жыл бұрын

@@thesportztourer Sure.. thank you! 😁

Hi brother when i bought My Dominar the price sales executive said to me that do not adjust your chain in side stand and you should use the PADDOCK STAND

I have an uneven chain slack... How to fix

Wow video

To clean the chain whats your best suggestion out of these 2.. Diesel or Kerosene..?

@thesportztourer

5 жыл бұрын

Hi Naveen, Diesel works fine for me. My RTR 180 did 50k km with diesel cleaning 😊

I would like to tell one important point here, Dominar, pulsar 200 ns, KTMs all come with side stands only. This creates a lot of pain in properly aligning the chain, you may feel you have done perfect alignment by checking the engraved marks on both the sides but unfortunately when wheel is made into action at higher speeds you will hear a gushing sound of chain which annoys a lot.

WOW, 👍👍👍❤❤❤

Hi bro need your help!! 2 days back i cleaned my Dominar 400 UG chain sprocket. In that process removed front sprocket for cleaning and placed as it is but the problem that while riding i can feel one side of the chain is smooth and free and another side tight and hard and also by rotating the wheel i can see the difference i tried to fix but no luck so today morning i took to service center they just loosen little more and they said fixed. While coming back to my home again i face same issue. Can you please help me out. Thanks

@thesportztourer

3 жыл бұрын

Hi! This seems to be a problem with alignment (check the marked indicators on both sides of the rear axle). Other things to look for is wear and tear on a particular sprocket teeth and frozen chain links.

@saravananmathi6825

3 жыл бұрын

The Sportztourer Yep already check both are in same position. Any other solution please

A scratching sound from my rtr200 when I tighten the chain from showroom itself.. any suggestions?

@thesportztourer

5 жыл бұрын

Hi Akshay, Metal to metal contact will make some noise still if you feel it's abnormal get it inspected from the showroom. This video should help: kzread.info/dash/bejne/aaiL1NulgKrcdZM.html

Hey can you please suggest me a spark plug for cold start (Apache rtr 200) as i am facing alot of issues even after putting choke on. The temperature in morning drop to 2-3° Celsius..

@omdesai8863

5 жыл бұрын

Same condition on my RTR 200 If you got solutions pls reply

@thesportztourer

5 жыл бұрын

Need to check on that, the carb tuning has major role it that (plus the air flow).

@rohitmier

5 жыл бұрын

@@thesportztourer i have just changed the air filter but my carb is at lean mixture should i change it ...?

Same vid for rtr 200 plz

For a Dominar owner like me, your videos are most helpful. Thank you for those. I've done a little more than 11500km on my Feb 2018 model. A problem I face regularly is the chain becoming slack and I need to keep adjusting it almost every weekend. I'm wondering if the quality of the chain has been kept low, causing it to stretch out more easily. Should I shift to a Rolon X-ring chain/sprocket kit available at sniper-auto.com?

@thesportztourer

5 жыл бұрын

Yes, faced similar issues and finally the chain was replaced a few months back. The new stock chain sprocket is of better quality as no frequent adjustment was required after replacement. Have you checked this: kzread.info/dash/bejne/oWWGurJshbSagNo.html

Another thing I wanted to ask, I have seen TVS Service Centre follow certain practice. They usually make other co-workers to sit on the riders and pillion seat. And they set the chain slack wrt the weight consideration of both the rider and pillion. I find it unusual though because most of the time due to this practice the chain slack is more(loose chain) than the prescribed company settings.( Provided that the motorcycle is in standstill condition without any load on her) What are your views on this?

@Amex15

5 жыл бұрын

Yes i have also seen it & asked them they replied It is mentioned in there TVS service center Manual edition 2018.

@thesportztourer

5 жыл бұрын

Hi Suraj & Ameya, That can be done but the required slack will be different from the standard slack plus the weight on the motorcycle is not specific to the rider. It's different but not a wrong practice 😊

@Amex15

5 жыл бұрын

@@thesportztourer i agree👍

Hi bro. .there is Tak Tak noise in my dominar even though if I didn't apply brakes.. basically when ride in even little patchy roads.

@thesportztourer

5 жыл бұрын

Hi, From the chain?

@Veeranna-fu3qr

5 жыл бұрын

@@thesportztourer yes..like hitting something

My rtr 200 chain makes more noise and i go to service centre they are not doing well what to i do

@t.jraghul747

5 жыл бұрын

My chains are run only 4000 km

@thesportztourer

5 жыл бұрын

Hi Raghul, A lot of reasons can be behind that, you can ask the service guys to specially pay attention to it. If you have not seen this before then this video should be helpful: kzread.info/dash/bejne/aaiL1NulgKrcdZM.html

At howmany kms chain slack should be adjusted?

@roninr8199

Жыл бұрын

For every service that is once in 4 to 5 months and around 4500 km I ask service center to do chain adjustment

Does dominar swing fit on pulsar rs200?

@thesportztourer

5 жыл бұрын

Hi Sourabh, I doubt it will fit still things need to get checked for that 😊

@SourabhPatel

5 жыл бұрын

@@thesportztourer 😅

bro make a video on engine oil flush and engine oil additive from 3m

@thesportztourer

5 жыл бұрын

Hi Biswajit, Have made a detailed video on flush here: kzread.info/dash/bejne/f46i0Kp8dNSepbg.html Do you want a specific one for 3M?

Bro i did not understood this 3:49 , can u explain it ?? Btw your videos are very helpful 🙂

@prithvinayak14

Жыл бұрын

There are torque recommendations in the bike’s owner’s manual for such bolts. It basically tells you how tight it should be for optimum performance of that nut. If you tighten it more it may cause issues, if you tighten it less it may come out due to vibration. There a tool called torque wrench which is used where you can set the tightness number ( torque value given in manual) in the tool and then tighten it. It stops at that value and will indicate that the tightness has reached the value required. Torque wrenches are a bit expensive though.

@thesportztourer

Жыл бұрын

Hi! Well explained by @prithvinayak The channel has also got video on torque adapter/wrench: kzread.info/dash/bejne/f46ZzdGCp9e2pKg.html

Make a poll on how many of your viewers/subscribers own Apache 200s and how many own the dominar. Should be fun