Excellent video! I believe this is probably the main reason most of us are having issues with these after market pumps. It actually makes a lot of sense because the flat arm angle is so flimsy I doubt if they are keeping the tolerances in production. Thanks for doing this video 👌🏽

@Coverman66

5 ай бұрын

thanks..appreciate it..

Good video my friend I’ll remember this when I install fuel sending unit thanks

I just subscribed the reason I subscribed is because your not long winded you get to the point and that’s the kind of advice I’m looking for and I value you talked just enough to show personality without annoyance if I knew where you were I would send you some batteries for your clock keep them coming Thank you

@Coverman66

3 жыл бұрын

much appreciated brotha Rene.. lol thanks

My 73 ford needs this done. Reading waaaay over the full line after installing new tank and sending unit. 👍

@Coverman66

4 жыл бұрын

hope it helps.. keep me posted..

Nice view brother keep them coming

makes sense on paper, but, after the visual you provided, even more clear!

@Coverman66

4 жыл бұрын

much appreciated brotha E.. thanks

Good info Terry!!✊🏾😎

@Coverman66

4 жыл бұрын

much appreciated.. thanks..

I like that Camaro sitting outside 🔥🔥

@Coverman66

4 жыл бұрын

lolol thats going to be a video soon.

Great vid! Thanks

@Coverman66

3 жыл бұрын

much appreciated FM.. thanks partner..

Great Content as usual, keep the video's coming and most of all stay safe.

@Coverman66

4 жыл бұрын

much appreciated.. you too..

Nice info!

@Coverman66

4 жыл бұрын

Much appreciated.. thanks

Thank 🎉you. You're a pro big help.

@Coverman66

11 ай бұрын

much appreciated..

amazing video

@Coverman66

4 жыл бұрын

much appreciated brotha E.

Great video as usual brother man! You can also adjust fuel sending unit in the tune as well. Just an fyi

@Coverman66

4 жыл бұрын

in some applications.. you're right..

Great video as always, bud!! I’m working on a LSA blower on my LS3 and need to change my in tank regulator to Aeromotive boost reference regulator at the rail as a return. Do you T off the feed line or use the rail test port? Any difference?

@Coverman66

4 жыл бұрын

im using the stock rails.. i run the return from the regulator

@FireballMullet

4 жыл бұрын

coverman66 great, that makes sense!

while im driving my gauge will go down a few ticks and go back up to where it was before (i thought i was going crazy at first but it’s definitely moving up and down), will this fix that or is it a different problem?

The bell is smacked!

@Coverman66

4 жыл бұрын

Thank you.. your too SWEET..

That camaro another project of yours!? And again well explained video!

@Coverman66

3 жыл бұрын

You know it! brotha PF

I need your help desperately. I have a 1998 honda crv. Lately the low fuel light stopped working. However my gauge works fine and my pump works fine. Because my cars pump and fuel sending unit is together in one assembly the mechanics tell me to replace the entire assembly. Problem is we can not find one anymore. Can this low fuel light be fixed without a new assembly? If i leave it the way it is will the non working fuel light make my pump go bad ?

my manual calls for 3ohms full/80ohms empty the replacement unit I received reads 6.5omhs full/82.5 empty will that cause an issue ?

Hello bro , I have same issues with sending unit dakota digital sw 33 - installed onto chevy caprice 1990 OE - while testing out the tank its great but when install it inside its slow reading and not correctly read - any recommendations ? Even that I adjust fuel level many times with measurement the distance and deep.

@Coverman66

3 жыл бұрын

i would give DD a call.. it could be anything from the sending unit to the not sitting properly in the tank..

Thanks a lot, my tank is on full and it keeps saying half so I guess I should bend it downwards

Very helpful video. Thank you for sharing. By the way anyone ever tell you that you look like Muhammad Ali?? Lol

@Coverman66

5 ай бұрын

i get it all the time.. thanks..

My 2004 Nissan Frontier recently started showing 3/4 full at a full tank fill. I have had this truck since new and I have never messed with it. I assume I just need to replace the pump due to age?

@Coverman66

3 жыл бұрын

does the Nissan have everything in contained in the bucket?

Hey Terry, Your tank appears to be level when out of the vehicle but is it level when in the vehicle and fully resting on its suspension?

@Coverman66

4 жыл бұрын

no my truck has a rake to it..

Oh man I wish I would have seen this video before, I replaced the sending unti on my toyota pick up with an original oem part and the freaking thing dials 1/4 while empty.

How are you liking the pump? I'm debating on getting the dual 340 for my sierra.

@Coverman66

3 жыл бұрын

love it.. looking to do it again o my next build..

2007 6.2 Yukon Denali put 340 pump in But gauge stay right around full will not move...plzz help what I need to do.

@Coverman66

3 жыл бұрын

did you test it before putting the tank back in? the float might be stuck on something.. is the tank back in the truck?

My gauge goes up and down with acceleration and deceleration. Why does it do that? How to fix it? What stops the float from moving up and down with the gas as the vehicle accelerates and decelerates? Thanks for all and any help.

@Coverman66

3 жыл бұрын

a baffle.. what type of tank are you running? a aftermarket?

My fuel gauge literally works backwards. Low fuel might covers on when I full up and it runs out when it hits full. How do I reverse that. The is no video anywhere or no mention by anyone on KZread.

@Coverman66

3 жыл бұрын

K is this a stock sending unit? it could be the wires are crossed. i would get another sending unit and test it outside the tank to see if it read accurate.. keep me posted..

@simonbuttenshaw8057

Жыл бұрын

I think this would happen of you put the wire in from the opposite side. Unscrew it and put it in the other way and see what happens.

My Chevy Colorado the sending unit wears out all the time.

@Coverman66

4 жыл бұрын

wow.. i wonder why?

I filled my tank all the way up two days ago, it's still on full ain't moved wtf

iam going to try that my tank can be full and my gauge won't go haft full

@Coverman66

3 жыл бұрын

some time you have to bend the rod until it reads correct.

Ohhhh come on!!!!!

It's too bad they don't make a stock fuel tank with a drain on the bottom!

@Coverman66

4 жыл бұрын

thats would make it easy for people to steal gas i guess.. great idea.. lolol

@martyosborne3399

4 жыл бұрын

@@Coverman66 That depends on how low you car is. It's better than having them cut a fuel line.

What your name on Facebook

@Coverman66

4 жыл бұрын

terrylsx or terry wilson

just put another sender in

@Coverman66

3 жыл бұрын

when you have a custom build you have to sometimes modify the rod for it to read accurate.