I'm literally just casually watching a video of a company 3D PRINTING ROCKETS that they could build a 3D PRINTING FACTORY IN MARS. HOW AM I NOT IN THE FUTURE?

@stevepeterson7969

Жыл бұрын

Maybe, just maybe we are.

It requires money to make money that is one of the best secret I have discovered so far

@gracemichael9063

2 жыл бұрын

DODGECOIN HOLDER HERE🚀🚀....BUT WHY EVERY WEEK THEY KEEP SAYING A GAMMA SQUEEZE & IT'S GOING TO SQUEEZE COMING? LOL AT THIS POINT NOBODY KNOWS🤷BUT FOR ME I'M STILL HOLDING

@wernershantel3317

2 жыл бұрын

@@gracemichael9063 Most time having knowledge or insight about a particular activity can as well be a pleasing exercise. crypto trading is one of the profitable money exchange services that elevates investors and their financial status.

@joebilly7164

2 жыл бұрын

@@wernershantel3317 That's true most people today have been having a lot of failures in forex and crypto sector because of poor orientation and bad expert.

@marklucious1194

2 жыл бұрын

I'm still holding 5K hoping to reach the moon:-D

@tombrady6103

2 жыл бұрын

Trading crypto is very much wise but trading without a professional is very unwise and really bad, you will lose a lot

Even though I’ve watched other videos on these guys you did a great job making your video different. Getting a great amount of info into a short summary. Thanks for all your efforts

relativity is more promising than blue origin, hope they succeed

07:26 Mars is a long way to go for the IT guy if the printer jams 🤣🤣🤣🤣

One of the best videos I’ve seen in a long time to do with Rocket Engines and 3D printing “Very very interesting and educational👍👌😍

Bro, this company is somewhat late in this section, a startup in India already printed a rocket engine n tested like 7-8 months ago

@notmyself3461

2 жыл бұрын

Wait in orbit?

Not going to make SpaceX obsolete, but if it succeeds, it will certainly kick SpaceX into doing something similar.

There’s a Mars factory in Slough, it often makes the place stink of Ovaltine. On a more serious note, surely SpaceX is the reason why so many small space companies have appeared, with lots of funding from hopeful investors. They’ve shown that the old pork barrel politics enjoyed by Boeing et al has led to a lack of innovation and high cost.

This video was about the same one that Veritasium did last week, but not much depth

They should print a launch pad as well to simulate how they plan to come back from the moon or Mars.

Nice video.

make these tiny straws in the skin that buffer a pin being fired to the front side in a firing order the shock of collision causes a modest boon of momentum inertia indifference and force neglects the opposite directions the firing rate balances out throughout the whole fuselage so it runs smooth like a combustion engine with thousands of cylinders when running in deepspace it accumulates speed of transport.

I've seen a few videos about this company - Nobody has asked them if they've pressure tested the tanks to failure, if so, where does the failure most often happen? At the horizontal grooves that the 3D printer leaves?

@iteerrex8166

2 жыл бұрын

Yes, it has to be heat, pressure, stress tested. Very likely it has to be tempered, coz of all the internal stresses, it’ll turn into a cactus at the first sign of any heat. Or worse fall apart. So many questions. It’s not a vase to just look the part, print it and it’s done. Does it function?

@yakkshit

2 жыл бұрын

Visit cedzxtech channel once just suggest how is our videos

@jhyland87

2 жыл бұрын

@@iteerrex8166 yeah I agree. And they never mentioned anything about that... lol

This is dangerous for other companies, they will destroy other competition. Or elon will probably buy them

@thannsokkhen9980

2 жыл бұрын

I think they won't sell it to Elon.

@aaronoconnor606

2 жыл бұрын

@@thannsokkhen9980 everyone has a price

This video is so interesting

Conformed contour cooling and conformed inductive heating is the secret sauce for optimal rocket. Go for titanium arospike!

a factory able to be launched on one trip payload to Mars, wow!

SpaceX is 3D printing many of their parts too, so does Rocker Lab. This sounds like an add for Relativity.

This is unbelievable. 3D printing is the futurr

Money will make more money if the idea is worth the cost

I thought SpaceX was 3d printing rockets and parts. ?

This sounds cool and I'm excited and hopeful for it - however what are the downsides that made Elon and Bezos look away?

@aaronb8698

Жыл бұрын

porosity, residual stress, density, warping, cracking and surface fractures post processing

Is any of their software open source? Are they sharing their knowledge with other Americans?

I'm watching this video of my 3D computer that I made from spare parts of car engine.

You got the idea to make this video from Veritasium didn’t you?

@aminfozdar

2 жыл бұрын

Yeah it’s the same but not as much depth

Hopefully this is the direction that all industries take. When everything is 3D printed, everyone can be a manufacturer anywhere that’s convenient.

Wow

Already been done in New Zealand. Old hat.

“What if everything we knew about rocket building was incorrect?” 🤨 None of the principles that a rocket is based upon has changed, only we are using a new building technology to do the same old thing. 3D printing has some benefits, and therefore it’s beneficial to redesigning some of the parts.

POV: This video was made by Nas Daily📹

India And United States Space Collaboration Few Weeks India United States 3D Rockets Develop

3D printing is good but it’s too slow when you have to print something big. SpaceX uses 3D printing for small parts like the rocket engines and the Dragon capsules. It’s all about efficiency.

@notmyself3461

2 жыл бұрын

It’s faster than the traditional way

if you really think of it we are in the future at this point.

Integza needs to hit these guys up

Wonder why they don’t 3d print a magnet powerful enough to get into orbit?

@adolphdooley3632

2 жыл бұрын

Robert Foedisch - because ignition; energy; power; thrust; and force, can’t be 3D printed, but it’s precisely what’s needed to get the 3D printed stuff into orbit.

Hi

@yakkshit

2 жыл бұрын

Visit cedzxtech channel once just suggest how is our videos

But how do these relativity employess get paid?? whats their primary source of income ?

@bruhder5854

2 жыл бұрын

Investors pretty much. If there's a good baseline for the project then investors are more likely to invest big money in it. Carl pei (formerly the founder of Oneplus) formed a new company called "nothing" recently and it gained a shit load of investment despite it having released nothing at all.

Because of the economic crisis and the rate of unemployment, now is the best time to invest and make money 💯

@gomesboston9059

2 жыл бұрын

You can say that again

@levibradley610

2 жыл бұрын

@@gomesboston9059 Cry`pto is the new gold

@terrencekirk4802

2 жыл бұрын

@@levibradley610 Stocks are good but Crypto is better

@williamswinston3636

2 жыл бұрын

I wanted to trade crypto but got confused by the fluctuations in price

@craighowell8052

2 жыл бұрын

It won't bother you if you trade with a professional like Mr Ronald Dickson

Well, it says it simpler... but... building a rocket out of steel sheets looks much more simpler then 3d printing it.

@pacresfrancis1565

2 жыл бұрын

Veritasium made a video with more details than this, (I recommend u check it) but in short using, the traditional way of building a piece of rocket requires many many toolings(shaping of metal) for just one part. while 3d printing can print a part in 1 piece. I'm badly paraphrasing btw

@clashgamers4072

2 жыл бұрын

You're not wrong welding sheets together is simpler but that's only for frame not when you're trying to create a better engine

@StillAliveAndKicking_

2 жыл бұрын

3D printing can be more efficient than bolting together components made by CNC machines, plus less wasted metal, plus more complex structures can be made. For large simple structures such as the fuselage, traditional methods are the way to go.

@Ocodo

2 жыл бұрын

@@StillAliveAndKicking_ Well, you know, I don't build rockets for living, so I admittingly not an expert. But, would like to see those fully 3d printed ones actually fly. In my eyes printing only parts suitable for 3d printing, like spaceX is doing seems more reasonable in my eyes.

3d

2160p

@yakkshit

2 жыл бұрын

Visit cedzxtech channel once just suggest how is our videos

this naming of machines being 3D printed is getting out of hand, it's manufactured, not 3D printed

@adolphdooley3632

2 жыл бұрын

MMO Archives - be very quiet🤫certainly it’s manufactured, by a process known as 3D printing.

Gee, & just read an article from 3 mos ago the Space X is printing rockets using 3D technology. Amazing how everyone at Space X thinks they are on the need to know list. Nit even presidents make that list. Amazing isn't it? Hey Mark Cuban bought into it.

[١٦/‏٨ ٦:٠٢ ص] محمد: You're thinking the fast man to have died in The Avengers. You guys make a new movie with a new hero to the Fast Man, like Spider-Man. [١٦/‏٨ ٦:٠٣ ص] محمد: If he thinks it's a good idea. [١٦/‏٨ ٦:٠٤ ص] محمد: Add likes [١٦/‏٨ ٦:٠٥ ص] محمد: Talk about it. [١٦/‏٨ ٦:٠٦ ص] محمد: Because Marvel Studio can see it.