How the Horn Wiring Works - NRG Quick Release + Install
Тәжірибелік нұсқаулар және стиль
I never really understood how the horn button actually worked. Didn't realize how the wires could go up through the quick release and work the way they did. Did the research and am passing it on to you.
www.ebay.com/sch/i.html?sid=l...
Snapchat @ StewartMotoring
Instagram @ stewartmotoring
Facebook @ stewartmotoring
Пікірлер: 34
Can I get a “hell yeah brother” for the mullet?? 😄🤟
@matthewvaughn9026
2 жыл бұрын
He'll yeah brother!!
This is exactly what I needed to know. I don't want a separate button for my horn either. Thanks !!!!
Nice work. Appreciated the wiring explanation!
Nice work man, thanks for the update.
Awesome back to back vids
THANK YOU!! I was so lost on how the horn works
@StewartMotoring
2 жыл бұрын
You’re welcome. Glad it helped
Doing this with a landcruiser. Bought a factory wheel to replace the nardi. But didn't realize the landcruiser is an older stock that has the brass ring while the newer wheel has the harness wired for the horn. So I poached the horn ring off the nardi but realized the ring is touching the metal of the wheel which grounds it right away so ill have to insulate it from the wheel and try again.
Great explanation. Thank you! Love Your Mullet!!! 🤟🫡🤪😝💁♀️💖
Good video! Finally I found a quick release steering video with a horn for an S30 chassis. I am also in the middle of doing this but was wondering if you have a parts list for this...???
@StewartMotoring
3 жыл бұрын
Sorry I don’t ha. I’ve had that quick release for like 4 years now. Same with the steering wheel but both came from eBay 😂
What is the black hoop coming out of the side of the button for? When i try to install the button, this hoop touches the steering wheel/ boss kit and causes the horn to BEEP. Im not sure how to fix this - any idea?
If it was December and then January there in Illinois, it was those months everywhere else too.
Where is that horn kit. I can not find the horn kit anywhere!
Is the retainer clip needed? I noticed you didn’t have one installed on this video
@StewartMotoring
3 жыл бұрын
Not sure what that is lol. Maybe it makes things easier?
@partylikeaspencer24
3 жыл бұрын
@@StewartMotoring the metal piece you grounded to the copper part of the hub itself, could one just use electrical tape?
This video saved me 😂
@StewartMotoring
2 жыл бұрын
Lol, good. Tough to think about without having like physically done it.
@bigelr33
2 жыл бұрын
Yeah I got sent the wrong boss kit with out the horn wire so straight away from the start my mind was blown 😂
“Deez nutz” 🤣🤣🤣
@StewartMotoring
2 жыл бұрын
?
So is that black wire at 12:31 a posative or a negative wire ?
@StewartMotoring
2 жыл бұрын
Negative
@alanarias8909
2 жыл бұрын
It was the negative ground to negative battery or negative to the horn wire!? When you use a positive wire directly to the steering wheel!?
@StewartMotoring
2 жыл бұрын
Idk if you’re asking me a question or not… but the positive wire is not used anywhere in the steering wheel. The positive wire is ran from battery or accessory circuit directly to horn.
@alanarias8909
2 жыл бұрын
I really admit that it was not a simple question or something similar jajaj I appreciate your understanding …Only the positive wire goes directly to accessory when u connect the key
ok ok ok ... how does my wheel volume control 🎛️ buttons work ? 😢
@StewartMotoring
7 ай бұрын
I think, it’s the same idea, but three different lanes for each wire to glide against. But I could be wrong.
I shocked myself lol
1:46
Never understood why people displayed their horn.
Horrible video couldn’t see a thing