What is automotive power distribution and how does a PD module like the Haltech PD16 make wiring easier and a whole lot safer. . For pricing or to pre-order your click here: www.haltech.com/product-category/inputs-and-can-expansion-products/power-management/ ----------------------------------------------------------- Liked this video? Here are more like it: How To Set Up CAN Keypad: kzread.info/dash/bejne/fmatzNdppqbIh6Q.html How DC Motor Driver Works: kzread.info/dash/bejne/hWiNpdOkXZnSd8o.html How NSP Oscilloscope Works: kzread.info/dash/bejne/f56Jp8OYfNPbcs4.html

@grahamtill9844

2 жыл бұрын

Haltech, please answer me this. How do you, an Australian owned company, sell its new PDM16 at almost $125 AUD more in Australia than it does in the US?

@haltech

2 жыл бұрын

AUD price includes GST whereas the USD price is ex local taxes.

@607CHA

2 жыл бұрын

Please bring out a plug and play option for the toyota jzs161/ lexus gs300. Would be a good seller, for us Aussies to buy a boomslang harness from usa cost $1100 landed. Im wanting an elite2500. But stand alone apparently wont have climate control anymore.

So awesome! I wish this was out sooner! This with the Nexus make an entire car solution

@nathanclark6336

2 жыл бұрын

We were pushing to try and get it to you in time. I'm sure you'll need more I/O soon 🙂

@MattyEngland

2 жыл бұрын

Meow

@Hybridesque

2 жыл бұрын

Was just thinking about Rob when I saw this vid.

@miraclemansgarage5647

2 жыл бұрын

go finish your car and quit making excuses..lol

@rod.h8064

Жыл бұрын

@@miraclemansgarage5647 cars you mean, though it does look like his two-rotor Corvette has entered the tidy-up stage with one of these now installed

Anyone else been binging these vids? I'm trying yo figure out what to go for on my 405

Thanks a lot for bringing out a video on PDUs....was very helpful

@haltech

2 жыл бұрын

Glad you liked it:)

Thanks, Matt! Something else to learn!

great to see my favorite ecu company innovating and educating the market, this is why you guys are KING, someone at head office needs the Sydney local number plate of choice KNGECU or ECUKNG

I CANNOT WAIT to get this

This is so cool!

One thing I learned wiring in a PDU (Smartwire) to run the car was that you can't use it to switch on the ECU if the ECU controls the PDU! You will still need at least 1 physical relay with fuse to turn the ECU on and off with IGN power.

Can Haltech please do a video on Automatic Transmission Control? Would be awesome to see you guys actually tuning an a340e. Not much info out there, and no videos. Hopefully someone sees this!

@TaranRamjit

Жыл бұрын

I second this, seems like it is being kept secret.

great vid ....can you please do a vid on how to wire in and stage fuel pumps cheers

can't wait to get my Elite 2500 and PD16 wired up in my V..... I've been slacking! Have had all my Haltech stuff sitting for months now.

@TaranRamjit

Жыл бұрын

Me too

with an Rx7 FD.. would using the PDM for the Fan relays be ideal? to my understanding you want relays somewhat close to the device its used for. I'm very interested in using this for my other FD cause it was sitting for 16 years and I want to take all the wiring out. I am wanting to still use the ignition stock on the column but using a PDM. Is there also a way to use more than one connected to a 2500 elite? if you were to use all the 25A output/inputs? Also is there an issue using, for example, at 20a device and splicing the wiring to 3 of the 8A HCO? I am still tearing down the car and might be trying to ask questions that are not problems yet but my mind is what it is.

My headlamps draw 11amps each side can the 8amp be used or will the high out be required ? Trying to decide if I can remove all factory loom with this and elite 1500

It would be great if Haltech made it possible for an Elite none drive by wire ECU to get DBW if you combine it with the PD16.

Will these be compatible with the FG plugins eventually and can the h bridge drive an electric wastegate? Cheers

Hi, Is it possible to use the original Steering Column switch?

Would I be able to use this on my oem hvac like air conditioning and heat? I got an elite 2500 for an is300

This would be good to NOT run a thermostat and keep water on a modulated output with fan control combined to have a target temperature :)

Are the 4 HCOs Bridgeable for higher amperage?

Can that power distribution box run a brushless fuel pump with out the need of a external controller for the pump? Brushless fuel pumps have 3 wires going to the pump. Please make a video explaining all of this.

While this is akin to screaming into the void. Would be awesome if you guys added some code to the Adaptronic Line of ECU's to play nice with these... Jordan

is there any way to use two outputs to power the same thing? Im wondering if i run two 8 amp power outputs to something if i will have 16 amps to play with.

@Nebbia_affaraccimiei

2 жыл бұрын

the superseal 1.0 mm pins should carry 15 amps no issue, no idea why he says they're rated at 8 amps

Can u use 2x pdm on CAN line ? And ECU will pick this up all outputs ? Also can you join 2 25amp outputs together to have a 50amp output?

@zoltrix7779

2 жыл бұрын

I had the same questions in regarding parralel outputs. 25A could be limiting, sure you can use a relay... but then, its the same issue as not having the PD16.

I literally just bought the Nexus R5 yesterday, I'm assuming this PD16 is only required if I needed additional functions on top of the R5's outputs?

@nathanclark6336

2 жыл бұрын

Correct

You say it can sink current, but I don’t see a dedicated ground connection like on the nexus. Is it going through the case or does the ground connection have to be added another way?

@nathanclark6336

2 жыл бұрын

Stanley, the PD-16 is used mainly for high side driving devices with Battery Voltage (100A), but it can sink up to 30A total via the ground pins on the 34pin connector.

@Turbochargedtwelve

2 жыл бұрын

@@nathanclark6336 he said the high current drivers on the dtp connector could source or sink and also that it has a h bridge. Was that inaccurate?

@Turbochargedtwelve

2 жыл бұрын

@Andy Wyatt ok, that makes sense. One other question, how is the ZVR/ sensor ground set up? Is it shared with the ECU or does it need to stay separate? Is it the same for the 5V ref?

@Turbochargedtwelve

2 жыл бұрын

Ok, that makes sense, they stay separate. Also after writing the last comment I realized who you were, the architect of this device, so I hope you don’t think I’m being overly critical. I think this thing is really awesome.

If I have a Nexus R5, why do I need a PD16?

Will this unit be compatible with Blink Marine or ECU masters Can keypads?

@haltech

2 жыл бұрын

Just Haltech CAN at the moment

@TheGCJourney

2 жыл бұрын

@@haltech Thank you for the info!

When can I get a premium harness and elite 1500 with one of these attached instead of a fuse block?

@haltech

2 жыл бұрын

You can pre-order the PD16, it officially goes on sale in a couple of weeks.

@DavidYingst_505

2 жыл бұрын

@@haltech are there any plans to package these into elite ecu wire harness bundles? The current premium harness comes with a preconfigured fuse block and one of these would be a huge upgrade. I'd love a prewired core harness with this built in.

@nathanclark6336

2 жыл бұрын

@@DavidYingst_505 Not currently, but there will be information available to show you how to achieve this.

Will this work with the VMS?

@haltech

Жыл бұрын

Yes. The PD16 is compatible with the Elite range.

I’m currently on an elite 2500 on my fd rx7, would I be able to wire this into an all factory dash set up? Don’t want to use a keypad as it’s a street car.

@mattjohns3394

2 жыл бұрын

The PD16 has inputs that would make that probable but I'm just posting here to see if this gets answered.

What's the story with the Oklahoma license plate?

@haltech

Жыл бұрын

Just a nice little souvenir from when we went to OKC to visit our Street Outlaws friends.

If only it was stand alone too

It is better to use the oldskool way of relays and fuses. A bit messy but guaranteed not to leave you stranded. With this pd16, it may look simple but you wont be having a good day when the software fails

SORRY FOR BEING A IDIOT! So can I use this like a stand- alone ECU? Like Volvo have a engine from 1999 witch the programing is diffrent then years before and after, so I cant take that engine in a 1996 or 2001 modell! Dose this take care of that? Sorry for asking a stupid cuestion!

@nathanclark6336

2 жыл бұрын

No, this product is not an ECU, which is what you need. I suggest contacting Haltech support or a Haltech dealer to find the best ecu for your application.

Given that industrial applications do similar with VFDs and PLC but still use fuses, breakers and mechanical relays, sounds as this is being oversold very much... especially since there has been to no response to technical questions in the comments. If your use case fits the preset Amp loads this this is viable but if your current loads don't match then this is useless.

@bowez9

2 жыл бұрын

@Matt Wright my cars have multiple fuses 40+A, not including the main mega fuse. The PD16 lacks the flexibility of industrial controllers (Powerflex) to be useful or safe given the specs they list (for what about all the

This seems like another overpriced proprietary PDU targeted at race teams with too much money. I understand I'm not the market but I'd really love to see something targeted at integrating with existing CAN systems. Something akin to the J1939 and NMEA 2000 keypads and PDUs offered by Blink, Empirbus (now Garmin), and Eaton, but suitable for operating over plain CAN.