If you haven't already, we strongly recommend you watch Matt's Volumetric Efficiency video first: kzread.info/dash/bejne/d21q1KSCqr3Fo6g.html All right then, In our previous video (linked above), Matt explained the theory behind Volumetric Efficiency - today Scott (aka Tuning Fork) invites you to the dyno room for some hands-on demonstration of exactly how VE tuning happens in real life. Plenty of hints and tips ahead so put your "learning cap" on and let's go! Interested in this topic? Here’s some more educational stuff: How Flex Fuel Works: kzread.info/dash/bejne/fYWXxMOGeaTQk9Y.html How Dyno Tuning Works: kzread.info/dash/bejne/pJ-Xu6arp8Swcso.html How ECUs Work: kzread.info/dash/bejne/Zm2HzKqjntG8npc.html

@tylerandrews55

2 жыл бұрын

Would you take the same steps with a OEM ECU? or would it be different? I ask because I tune cammed, stroker and boosted engines with factory ECUs and sometimes it can make you want to pull your hair out.

@chuckie2880

2 жыл бұрын

wouldn´t it be nice to have a button or command for steadystate tuning wich applies the O2-Correction number on the active cell? that would save tons of clicks right?

@pizletwizzler198

Жыл бұрын

... _sel-ee-kuh_

This helps explain some of the magic and mystery, still seems magical and mysterious when your car drives onto the dyno, Scotty magic fingers it and then it drives off AMAZING

@haltech

2 жыл бұрын

... and that is why Scotty's dyno videos need to be rated.

@thisguycalledalex

2 жыл бұрын

I come here to learn and hopefully apply some of the knowledge to my maxxecu street

@lliamthrumble

Жыл бұрын

Mighty Magic Finger Mods

@neilbeacham1244

Жыл бұрын

My head hurts

@nickv5799

6 ай бұрын

Love a good magic fingering

I paid to do EFI courses online and this one video taught me more than the whole course! Thank you!

@rickybailey7123

9 ай бұрын

What I've seen on the paid courses is big words and alot of bullshit trying to make u think u really paid for and got alot of info !! This guy is a really good teacher as well and on the other bs 1s they shouldn't be the 1 Teaching how to do it !!! He type it in and it changed that was so cool to watch and it made sense and the % of the engine is what made me wrap my head are what I should be typing in the boxes!! Now I need a dyno doing it on the street I'm going to get a dam ticket !!

Man that was good..I learnt so much... this will be on repeat for a few times. I love that you showed the interface in real time editing.

20 inches of vacuum you said. So, about 340 hectopascals? Takes me back to balancing carbies on motorcycles! The level of control we have over the combustion process these days is mindblowing compared to the old days. Thank you so much for explaining he process.

Great video Scott. The best description of air density I have seen was done by Gale Banks. He has several great episodes on air density and turbo charging on his channel.

@sebfullick5011

2 жыл бұрын

Gale banks taught me so much over about an hours worth of video

This has to be the most thorough explanation of VE tuning that made sense to me.......10/10 Scotty.

I don't know if this explanation is crucial for people used to "the old way of tuning", but for me this was clear as day. This is exactly how I imagined it would work simply by watching MCM, The Skid Factory and Nugget Garage. I guess it may have helped that VE was part of the explanation by the guy who taught me the different operation modes of two-stroke, four-stroke and rotary engines (KZread channel "The Workshop").

This could not be a better example to me, because this month i will finally install my Elite 1000 on my S13 (SR20). !

@haltech

2 жыл бұрын

Nice! Best of luck. If you get stuck - contact our tech support on support@haltech.com

Scott this is an amazing video i wish to see more of this content. Such techincal videos make me go for haltech for all of my cars and friends projects. Well done

@haltech

2 жыл бұрын

Thanks for the feedback:)

Well done done Scott so much explained so well. One of your best videos and it got the concept across to me perfectly!

Appreciate you taking the time to produce these videos. Very similar to a previous platform I’m familiar with just slightly different terminology. Videos like these will help sway my upcoming upgrade decision towards haltech platform.

Thank you. After watching this video we chose to add "air flow" to the Haltech Elite log. Now we just divide the stated lb/hr airflow with 60 and look at the turbochargers compressormap to see were we are at. Then we can compare this to the dyno hp and calculate hp pr. lb/min of airflow. We find this usefull.

Great video! I’ve been tuning with HPTuners for a while and recently got a Haltech, so this has helped me understand the system a lot more

This was so easy to understand. Thanks 😊

Such a fantastic video. This with the theory video actually makes it all make perfect sense.

Thank you Guys ! Can’t wait to start playing with my new 2500 elite ecu and learning from these videos

Thanks for explanation!👌🏽

So helpful for my understanding of the interplay between different functions of the software. Cheers.

I love how Scotty is sitting like he’s in an F1 car. But Scottys a legend.

@haltech

2 жыл бұрын

It's not easy to keep Scott in frame when he's well over 2m tall LOL

@wickedgood1984

2 жыл бұрын

@@haltech We need to get Scott and Edd China to do a show together. See whos taller!?

@wickedgood1984

2 жыл бұрын

@Scott Hilzinger really?! That’s amazing! Love the channel keep up the good work!

I come from the injection tunning method with the old bars style software, I could tune that setup with my eyes closed, this is all new to me and excited about learning it. Great educational videos

You just made so many things click together in my head, as I've been struggling to comprehend this vast world of tuning. Thank you so much! I feel a lot more confident now as a beginner to slowly start adjusting things; I've been scared to tweak anything past the basemap on my freshly turbo'd 1990 Miata running an Elite 1500, even when I identified an issue. Until I can schedule at a dyno tuning shop I've just been trying to take it easy, but wanted to tweak the minor AFR issues I saw. Now I feel like I can! You're the man!

Outstanding job on the VE table explanations for this video. I have been getting into tuning over the last year using HP tuners and an ECM link for the old DSM's so any great information like these videos is appreciated. Have also used MOTEC in the past so Haltech is one of the few major platforms I haven't had a chance to use.

Thanks for your video very easy and simple way u explained how to do it u are a great teacher !!

wow!!... best explanation and all words perfectly said!...

Just got a halted for my 33. With the added sensors mentioned here. Can't wait to put it all together and be able to drive it to my tuner with a closer base map for him.

Great explanations thank you clarified so many tuning items.

Great job! Thanks

Excellent tutorial, 💪🏼

Oh shoot, the tuning is really an art with Haltech! More I see these technical videos, more I incline to get one for my car. Thanks guys for these vids!

@haltech

2 жыл бұрын

You're welcome:)

@omacastro1231

2 жыл бұрын

I also am saving for an elite 2500

What a great series of tutorials (along with Matt) I feel like I’m in kindergarten being schooled by professors. Nicely done Haltech. Also how perfect is that RA celica from engine bay to interior 😍

Great video Scott, and hats off to the owner of this cool car! Cheers mate...

I now want to buy a beater and learn irl... cheers dawg, you just taught me invaluable information I truly wish to put to use in my future career

Great video, nice to see it explained in practice. Would love a similar practical video on the ignition, as its the part where many newbies like me start sweating, especially without a dyno.

@BjornFSE

2 жыл бұрын

gotta agree with you there on the Ignition part newbie or not without a dyno.

@ehworkshop9922

2 жыл бұрын

Nope

Loving these technical deep dives

Man I'm starting to regret I bought a fuel tech ECU. I'm starting to love haltec from all your videos . Not downing my ft450. But man oh man you guys are great with videos and help

Thank you Tuning Fork!

Well done Scott. Its not easy trying to explain this complex stuff to the masses! ❤️

Wow i actually learnt from this explanation. Thank you so much ❤

OMG, so well explained again! Thank you! :-D

I love this guy! ❤

Best car you have had ever on the channel swweeetttt

@haltech

2 жыл бұрын

LOL glad you like it:) We did have a very similar Celica in our "Tuning in the 1980s" video a couple of months ago.

absolutely amazing video!

Thank you so much! This has helped me so much

Very well covered 👍, can we also get this level of detail on adjusting for intake air temperature compensation/coolant temperature compensation? Looking forward to timing tables and more. 👍

Very logical and easy to follow.

thanks a million scott, that was an excellent tutorial

@haltech

2 жыл бұрын

Glad you enjoyed it:)

I hit subscribe button after watching this. A really good one.

I have a dream. A dream of really smart ECUs. To be able to tell the ECU "this is my base map, give me 15% more power", and it will create the most optimal result on it's own.

this video is pure gold

Just like a Harley only in real time. Very nice software. And yeah, if you start with a fairly close "base map", the "fine tuning" is quicker and easier. Therein lies the art of tuning. Unfortunately, many consumers don't realize the intrinsic value of the art.

Awesome video 👊😁

awesome video very informative

Can you please do a Technically Speaking on the Engine Protection function.

Good job explaining

What an awesome explanation. I now know what I was missing on my tune. Time to bust out the laptop.

@haltech

2 жыл бұрын

Yes!! Good luck :)

Thank you so much

Awesome!

Clever stuff!

Fantastic.

thanks for sharing your knowledge. I listen to the episode 5 times while working. At a rally car where you have a 34mm restrictor for a turbo? what would be the VE number at full throttle

I’m gonna apply all this on a 2JZ swapped Subi. God is good!

This continues to be the hallmark we've come to know, trust and depend on as car enthusiasts and professionals alike! Delivery of an advanced technology to the market where it's easy to utilize through integration procedures that allow immediate return on value. Guided implementation strategies facilitated by the resources of a robust hierarchical support channel enables a direct pathway to exploit levels of success for consumers of all skill levels every single time. All this while keeping the product 100% accessible through a vast dealer network, a feat only equaled by its affordability across a wide range of ecu models which suit so many varied particulars! For this to be your hallmark over a span of 35 solid years says a lot in every regard. I can't quite say thanks enough for your continued efforts, please know that it has made so much within the industry possible. Sincerely yours, A Proud Haltech Dealer.

@haltech

2 жыл бұрын

Thanks bud:) Comments like yours make it all worthwhile.

Such a good explanation with real world examples and making the changes live that can be seen as expected is really awesome.

Nice. This was some Adre level Tutelage.

I was talking to a friend with a nostalgia Top Fuel car. He said they actually want to rev past where the volumetric efficiency is best. Because they are limited to a small fuel pump and the engine needs more fuel than the pump can deliver at that RPM. Yes to a nitro engine 20 gallons per minute is a small pump lol

Great vid

What great content. I'm assuming you have a lot of data on file now, so if you buy a Haltech you can be up and running pretty quickly.

Thanks Scottie. I've wanted someone to explain this and now I have a better understanding.👍🏽

Excellent video Scott, a question though, are you trying to get the target afr match the actual, or the other way round? Cheers

Hey Scotty, aka Tuning Fork. You mentioned that with really large injectors you lose a bit of control at really small pulse widths. Can Haltech's ECUs handle two different sized injectors per cylinder? I'm just thinking that you could start with the smaller injector, then work your way into the larger injector under boost or high RPMs. Not necessarily like the BRZ with the mixed direct and port injection system, but two port injectors. Maybe I'm just overthinking it. What do you think?

Ignition table setup and tuning next please :D

Tuning Fork, how much authority (aggressive) do you tell the O2 sensor to make the fueling changes, so it stays on the target AFR? good video💪

Thank you

I'm seconding the request for ignition tuning strategies. I know you've gone over it in other videos, but it would make an excellent follow-up to this video.

@MrDelsoleg11

2 жыл бұрын

Care to elaborate on which part of ignition tuning are you trying to learn?

@kinslayergaming3159

2 жыл бұрын

@@MrDelsoleg11MBT would be great

@MrDelsoleg11

2 жыл бұрын

@@kinslayergaming3159ah ok its really simple with with right tools in order to get to achieve mbt you need a precise dyno that's capable of reading torque in real time as opposed to calculating, usually found on dynos that include some kind of retarder. The common dyno jets will not be able to do the job properly. you'll also be limited by knock. Some engines won't be able to ever reach mbt, especially turbo charged engines running on pump gas since you'll reack detonation point before mbt. The proper way to tune isn't to chase mbt, but to reach the optimal performance for that given setup. Reliability should always come before performance when tuning a street engine. Street cars are never tuned to the maximum they just won't last. One trick I've learned when on a dyno jet is that the torque curve is usually flat around mbt so during that point if it's not knock limited I'll add a degree if it knocks I'll retard by 4 degrees maybe 5. If it doesn't knock but no increase of torque is gained I'll retard 2 degrees. To do it right is a long tedious process since you have to tune every load and rpm column and thats why you need a dyno with a retarder like a mainline or mustang. Obviously it can also be done as I described by doing sweeps on a dynojet but again it's more of a best guess as opposed to an actual reading. Hope that helps.

@kinslayergaming3159

2 жыл бұрын

@@MrDelsoleg11 i see

Love it

Brillant.

That's a great video thanks from the UK . What would be the short term fuel trim in the ECU master black software ?

excellent

One of the best engines to swap in your corolla or celica is a Toyota 2RZ or 3RZ. It is basically the 2JZ with 2 pistons chopped off. With a Iron Block, Steel Crank, Steel Rods , and DOHC Aluminum Head. This can make about 450hp stock when boosted. Throw some pistons in it. You can push it to over 600 no problem

One part I'm still not sure about; how do you decide what the target AFR should be? And another question, do you have to worry about dead time at the end of the injector cycle? Won't there still be a small amount of fuel coming out even after the injector has been switched of?

How do you determine what AFR number you put initially? You set a target ratio 14.3. Why this number and not 14.7 or 13.6. From there and on O2 sensor giving you the STFT to work around. So far no one gave me the very first target number how is calculated. Thanks

Awesome video! Got my hands dirty with tuning recently. I'm honestly loving it.

@haltech

2 жыл бұрын

Thnx for the feedback:)

Great video. Can you explain why my oxygen sensor ads fuel when intake air temperature is rising? In my opinion it makes no sense but I can watch my lambda getting lean when temperature is rising.

I loved this video because I tune EXACTLY how Scott said using the O2 correction to do my dirty work. But this video was still informative and entertaining.

For a V-engine with dual plenums, do you average manifold pressure or measure each plenum separately? If separate do you have one map for each bank?

Great video.. Keep this type of content coming.

@haltech

2 жыл бұрын

More in the pipeline:)

Did the initial volumetric efficiency numbers generate themselves after you input all the data? Or where did you get the initial number from cuz you were pretty spot on

Great video! One question though: How do you determine the right AFR values before tuning for VE?

@nickv5799

6 ай бұрын

From what I understand - most engines respond to similar afr ranges, for instance on petrol most will idle around 14:1, and you want to make sure you have around 12.5:1 to be safe when under boost.

@nickv5799

6 ай бұрын

So then you want to use "known generally safe" afr's to then ensure your VE is set up right as Scott shows in the video. Then once everything is proven, start dialing in the afr's for power etc. Then timing comes in after that...

@nickv5799

6 ай бұрын

I think the point is once everything is calibrated using VE tuning method, everything afterwards is very simple. You want 15:1 during cruise? Just type 15:1 in those cells. You change from 1500cc to 2000cc injectors? Just type 2000cc into injector data and the software sorts the rest to keep your afr the same.

@nickv5799

6 ай бұрын

At least I think that's the general idea.. I'm learning too 😊

Hi Scott, may you share your PID STFT and LTFT setting? 😬

So you can can use VE to get it to startup but you'd wanna use the wide band on the WOT correction

Wow! I would've sold my gf back in the day to have this SR20 in my 240sx!

the VE tuning has been fairly simple with the haltech. I just wish i had me a dyno lol i really really want to tune my car myself but it still has no lights or anything so still cant road tune it either

@frankosendit4521

2 жыл бұрын

Same here no tags and everything highway out side of town is full of bears

@christhorney

2 жыл бұрын

@@frankosendit4521 lol yeah fk hitting a big old bear, the kangaroos here are bad enough let alone a bloody bear

question here..... O2 sensor is use along with wideband in order to do short term fuel trim?

so how DO you set the AFR table for the first time on a "new to you" engine? cuz afai understand, once the target AFR table is set, you could pretty much auto-tune it by adjusting the VE table using the STFT delta you're seeing. But how do you know the AFR table to begin with?

can you use the 350z coilpacks on a vg30e d21 93 navara 2wd trayback sleeper?

Do you disable any tip in enrichment when tuning the VE Table?

Maybe i missed it, but is there the old school way of Fuel table in say PWM for injection within Haltech?

I will probably be coming back to this video many times while setting up my ecu, great explanation. P.s. I'm 201cm tall and know how uncomfortable that car is for you Scott, I feel your pain.

I only have one cell available in injector stage 1 flow in esp. How do I change the table to have access to additional cells? Great video btw :) long but definitely very interesting.

@danielmcgarry8052

2 жыл бұрын

@Scott Hilzinger thank you Scott, massive help. That did it!