My biggest piece of advice as far as loading goes: (speaking from personal experience). In the odds that your truck lifts off the ground and starts moving, keep loading. Don’t stop on the ramps. Stopping will only hold the truck up and you’ll keep moving and you’ll have high chances of jackknifing and doing a lot of damage. If you just keep driving whatever you’re loading, the weight will begin to even out and your truck will set back down, stopping the truck from moving. I get that it can be slightly nerve racking when your truck and trailer starts to move, and that will probably make you freeze up and pause. Don’t let yourself do that. That’s the worse you can do.

My best tip for driving a trailer safely: don't drive like you don't have a trailer. Meaning, slow the F down!

@85square

4 жыл бұрын

I really love the people that tow a camper in a snow storm at 80mph

@lossantoscity3249

4 жыл бұрын

@@85square God Damn! Slow Down Michael Schumacher !

@gunwrites6222

4 жыл бұрын

I live near Yellowstone National Park. I've seen many a destroyed camper and rolled rig from tourists going way too fast and/or blown off the road from the extreme winds coming down the Yellowstone River valley off the Yellowstone Plateau. The last one I saw had rolled and ended upright. The camper shell was gone from the frame and only the toilet was remained. How that survived is a mystery to me!

@stoicllc2352

4 жыл бұрын

Why not load it with the trailer unhitched?

@Note10plusAura

4 жыл бұрын

@@stoicllc2352 it will tip backwards.

I wish I saw this video a year ago. I loaded a trailer incorrectly and had to drive home under 45 mph constantly applying the trailer brake. Luckily I noticed the fishtailing right away because this could have gone bad. Nothing worse than having a trailer loaded for you with no forklift to fix it once you’re on the road. This is a great video.

Once you get your sweet spot.. A can of spray paint to mark tire locations on the deck of the trailer for your common loads (skid loader with standard bucket or compact tractor with mower deck) Then just hit the wheel of the skid steer or tractor with a dab of the same color spray paint. Different load, different color... couple / three satisfies most needs.

@Dirtmonkey

5 жыл бұрын

Good advice Bob, thanks for viewing !

@jonnboimuhfucka

3 жыл бұрын

That’s what I do😁

@tonylamantia6417

3 жыл бұрын

Spray paint where machine sits very good idea.

@vampyvampiro

3 жыл бұрын

Nice!

I load them backwards. Saves the front window on gravel roads.

@01cissy

3 жыл бұрын

GOOD ADVICE !

@taylorroarkpayton

2 жыл бұрын

@@dam2ben2 IMO they’re a waste of money.

@user-bd5md5cm2j

2 жыл бұрын

I've always loaded them backwards. Such a safer way to load and unloading.

I've been driving trucks for quite a few years. This is by far one of the best explanations I have ever seen

@Dirtmonkey

4 жыл бұрын

Thank you Dave, I appreciate that !

When I was first getting started I was loading my backhoe. My dump truck was on a slight downhill incline at the end of the road. In front of my truck was the bluff down to the river. I had just made it completely on the trailer when the back tires of the truck came off the ground and me the truck and trailer headed for the bluff. I quickly grabbed reverse and backed off the trailer. The truck stopped with the front tires on the edge. I was in shock but that is a lesson I will never forgot!!! Thanks for sharing your knowledge and saving some smart people that will listen alot of grief!! From another dirt pusher.......love the channel

Long as you say "She ain't going anywhere" There is no wrong way to load.

@blsully

5 жыл бұрын

You have to be using ratchet straps from Hazard Fraught when you say that otherwise the magic doesn't work.

@brandonpelshaw1300

5 жыл бұрын

@@blsully that is true also you want to make sure the majority of the weight of the load is towards the rear. That way you can turn them corners with precision.

@justinsane332

3 жыл бұрын

Nowhere....you mean nowhere. Anywhere is too proper, and will make something fall off. Everyone knows this.

@mistersounds2006

3 жыл бұрын

🤣😂🤣😂🤣😂 and hey.....8 out of 10 times she not!

@prrcpor

3 жыл бұрын

That's funny I like that

Very well explained. I suggest putting a marker or sticker at the center of gravity of each of your machines. Then put a corresponding sticker for the ideal matching spot on your trailer fender where they should align.

@Dirtmonkey

5 жыл бұрын

Good idea, appreciate the comments Nick!

After almost 19 years of driving semi I can feel how my load is in the trailer. I also gained a lot of experience on loading trailers. I have a trailer that I use to haul wood pellets on. Being it's short I can only fit 2 pallets of pellets on it. I tried 3 once and the very back pallet made the tongue of the trailer come up. Had to take the 3rd pallet off as I knew it wasn't safe to haul like that. I also understand about straps loosing up. I use to pull flatbed and hauled Christmas trees. Every 50 miles had to stop and tighten the straps. The trees would settle and the straps would loosen up. Kinda sucked cause if you knew there was a scale coming up you better stop before and tighten the straps. Had one driver not do it and not only had to tighten the straps at the scale but also got a ticket for an unsecured load. I still enjoyed the video and I will always learn something new. Always said if you hear a truck driver say they know everything about driving truck stay far away from them on the road. I learn something new almost every day even after almost 19 years driving.

@Dirtmonkey

4 жыл бұрын

Thanks for the feedback Eric and glad you enjoyed it. Thank you for watching!

@ericouellette5293

4 жыл бұрын

@@Dirtmonkey you are welcome keep the videos coming.

My dad taught me to strap down the equipment since i was 5, I am now 25 and I still do it the same way. Thank you for Spreading the knowledge.

Very helpful and informative video Stan. Loaded heavy equipment for 30 years and I agree - so many people do it wrong. After I became supervisor I had a company come out to the shop and train the crew on safe, proper and legal tie-down procedures. As an employer, I would have a new recruit load and secure a few pieces of equipment before hiring them to see what they know and don't know. This is something that doesn't get nearly enough attention. Thank you for sharing this information. Especially the shock straps. That's a big price-tag for a strap (buy once cry once) but worth it for the safety and peace of mind. Thanks again for this video. THIS is exactly why I'm subbed to this guy!!

@Dirtmonkey

5 жыл бұрын

I really appreciate the sub and all the great comments. Thank you for watching !

"Never load on a hill"?? Are you suggesting that people who live in the mountains just never use heavy equipment? The only flat spot on my entire farm is the floor inside the house.

@okiedokie3845

3 жыл бұрын

My thoughts exactly!

@nicholasdowns3502

3 жыл бұрын

The floor of your house is flat!?

@marionamewontwork2681

3 жыл бұрын

4/10 I dont have level ground to load OR a second person :)

@tonychristopherson7987

2 жыл бұрын

@@nicholasdowns3502 In my dining room you ALWAYS put the mashed potatoes on the uphill side of the plate with a dam to hold the gravy on. The first time my brother in law visited he couldn't understand why the gravy ran off of his potatoes but not everyone elses!!

@atozbikes

2 жыл бұрын

Yes. 🤣🤣

Had never seen the shock straps. Ordered 2. Thanks bud.

@Dirtmonkey

5 жыл бұрын

Thanks Adam , happy the video helped out !

Once again you did a great job, I am going to buy weigh safe and shock straps. I am 66 and have been trailering for 43 years. It is nice to see someone showing newbies how to properly load a trailer. I hope those people watch your video. Thank you!

@Dirtmonkey

5 жыл бұрын

Thank you George!

I’ve been using a Weigh-Safe hitch for a year and I love it. Easy to change the ball size. Very well made, and easy to order from the manufacturer website.

Good point about not loading in Park mode (actually not a gear, but a parking pawl), I'd never heard of it before. This is why I watch your videos, you are just about the only guy that knows stuff that I don't.

@Dirtmonkey

5 жыл бұрын

Thank you 👍

@mute8s

5 жыл бұрын

@horse1066 This is one of the reasons why I watch Stanley's videos. Lots of little good bits of information. You might want to look up Essential Craftsman too. It's another great source of information on KZread.

great video, i wish i could have seen this before my close call in 2001, haha! thats not really a shock but more of an elastomeric device that stores potential energy or "preload" on the straps preventing them from "ratcheting down" when going from unloaded to loaded...you are truly a thoughtful individual that thinks through not just the mechanical situation but the social situation. i can tell just from this one video your the kind of individual that strives for a 100 percent satisfaction rating from the clientele just as i do and sure, some may take some extra work but in the end its all the same...we work to serve with pride!

@Dirtmonkey

5 жыл бұрын

That's right! Glad you like the video and thanks for watching!

Great video I went into death wobble yesterday merging onto the highway with an overloaded trailer! Luckily no one was hurt! These videos are great even for experienced drivers to keep you on your toes to be safety conscious at all times! My company just got a brand new skid steer and we re gonna take the time to secure it right!

I'm glad to see videos like this. I had a bad accident in my racecar and the car was put on my trailer backwards by the tow truck. I almost lost the whole setup at about 50 on the freeway from death wobble. Never doing that that way again.

Great video! I just wish there was a way i could beam this video to the guy i pass on the highway in need of your advice! Nicely done.

@Dirtmonkey

5 жыл бұрын

Thanks so much Johnny !

Wow solid tips, these are the videos that I love watching and learning the basics.

@Dirtmonkey

5 жыл бұрын

Thank you !!

@Whopperjaw.

5 жыл бұрын

This guy reminds me of Richard Rawlings... GYSOT

I towed my bosses 14’ landscape trailer 30 out of 35kms I had to go until I rolled it my truck and the trailer at 110km/hr! Thinking even with 10+ yrs of experience towing big landscape weight, I still just didn’t load it right and probably a couple tires low on air. Now, I’m white knuckles every time I tow... it’s mentally and physically tough, but I still have tow a couple times a week for my current job. Thank you for taking time to put this video out there for all to learn, it will save lives!

You cover everything to the T> One can tell how educated you are and we appreciate it....

The weigh safe hitch is an amazing but simple hitch. We have one for our snowmobile trailer and its awesome. Those pins come of to where you can adjust the ball height up and down. And you can change the ball out easily as well. It is the best user friendly hitch I have ever used.

I’ve also found that backing the skidsteer onto the trailer so that if the ground that you are unloading onto is unlevel, then it will allow for more visibility of wheels, and more control while unloading.

Wow been trucking since 1976 don't know how I did it without you

Great video. Very important lesson. I learned through trial and error. I had trailer sway happen once to me and luckily I accelerated through it and nothing bad happened. But After that I paid much more attention when loading my equipment. I only use the metal ratcheting load binders and never have them come loose.

@Dirtmonkey

5 жыл бұрын

Thank you and thanks for the comments!

Solid video. I’ve been hauling stupid loads for 30 some years. Ive made almost every mistake at least once.. luckily without injury or serious damage. There’s never a good time or place to have to adjust your load or re-secure it once you’re on the road. Tie down selection is a personal choice.. I actually prefer the lever binders hands down.. but there are solid arguments for the ratchet style. One trick for ratchet straps on loads that can’t be tied too tight is to put a bungie from hook to hook or somewhere that will keep the hooks from becoming in-hooked if the load moves.

Good video, thank you for taking the time to show this, it should prevent a lot of accidents. I spent years teaching how to load tow trucks, flatbeds and trailers. I’m a big believer in the 4 point tie down system. I would like to add a couple of things... 1. You must also have a tie down restraining anything that articulates, so you need to restrain the bucket. 2. You should be checking your load within the first 25 miles and then periodically.

@Dirtmonkey

5 жыл бұрын

Thank you Jeffrey!

I like the way you go over in detail with what your showing . I like helping others learn also.

Thank you so much for this video! I just purchased my first utility trailer and the information you provided is priceless!

@makincash3337

3 жыл бұрын

It really is.

Stanley...you're awesome! Thank you for putting the effort into the video and introducing us to new tech. I just got my first TLB and 14,000GVW trailer so this information is invaluable to me.

@Dirtmonkey

4 жыл бұрын

Thank you, I appreciate that and am happy to show you all the new stuff. Thanks for being here!

Love the shock straps, might have to covert my stable of straps over.

Great vid! I’m hauling my first loaded trailer today and now I’m ready!

I'm glad you mentioned that the trailer should be level when you load or unload it... very important tip that I see a lot of people overlook

@Trivit30

5 жыл бұрын

Even unloading or loading with forks!

@Dirtmonkey

5 жыл бұрын

Yep! Thanks for watching 👍

Holy tail whip batman!!! How did the guy in the video not lose that machine? The look on his face is priceless. Something you might consider talking about is how an employee can go about declining to transport equipment with under sized or defective equipment and not get blacklisted by employer. Many times I have had to transport equipment on trailers with defective brakes, lights, or even use trucks with defective controls because if I said anything or took time to fix I would be sitting at the house. Things dont have to be new and shiny, but they do have to work. Great video!!

@Dirtmonkey

5 жыл бұрын

Really appreciate the comments Jeff and thank you for watching !

@thinkfirst6431

5 жыл бұрын

Jeff I understand the importance of keeping a job. I also understand that if you hurt or kill someone(s) you won't need a job if you land in jail for a long period of time. Which is easier on you and your family finding a new job or being employed by the state making license plates?

@jeffcourtney8101

5 жыл бұрын

@@thinkfirst6431 Oh it wasn't a hard decision for me. I got the hell out of that company. My original comment was really for the younger people that had only just gotten a CDL when they hired on. They don't know any better and they blindly jump into a truck loaded down with materials, hook onto trailer with 17,000 # backhoe and take off with no trailer brakes. If they mention fixing them before leaving they are told " just take it easy an you'll be fine". Famous last words.

@johns3106

5 жыл бұрын

It takes a certain level of maturity, self-confidence and diplomacy to deal with an employer who tries to force an employee into dealing with sub-standard equipment and practices. Too many times over the years I've had to deal with a boss who had "special" little ways of dealing with broken, overworked or overloaded equipment. "Don't worry...it will be fine!" Unfortunately there is no easy solution for dealing with this...do you want to keep your job? One thing I've found, is that the more valuable you are to the company in other ways, the more likely your concerns will be heard concerning unsafe practices.

@jeffcourtney8101

5 жыл бұрын

@@johns3106 I completely agree. Being an asset to an employer is or should be a fundamental goal of all employees. As an employee we have a responsibility to prove ourselves everyday. Our worth is measured in everything we do and don't do.

Great video! I just found out I have been loading my trailer wrong! I have always had it in park and never thought twice about it!

@Dirtmonkey

5 жыл бұрын

Glad the video helped out, thank you Tom !

I love the way he directs positive comments. With ACTUAL information instead some jerk being butthurt about what somebody says. Def gettin my sub and showing my boss!!

Tongue weight is your friend. Scariest loads I've ever towed were because I didnt have enough tongue weight.

Death wobble is a front suspension/ steering issue/ problem. This is trailer sway, that you’re talking about.

@christopherrosas2738

4 жыл бұрын

I was thinking the same thing, never dealt with death wobble, but i've had a trailer start dancing on me and I'm pretty sure it feels about the same..... Had my dad following me when the trailer started dancing and he was like.... Well, it didn't look that bad..... Automatically thinking yeah, but you weren't in the Jeep with the trailer dancing

@meegstomtom

4 жыл бұрын

Trailer sway can turn into a death wobble.

@michaelcuff5780

4 жыл бұрын

Drew w you are right. I know, I have a 2003 crewcab Dodge dually so I am more tham familiar with the death wobble. But I think he used that word just help explain the movement of the trailer.

@traviskonarzewski2576

4 жыл бұрын

Yessssss!!!!!!!

@okiedokie3845

3 жыл бұрын

@@christopherrosas2738 definitely doesn't feel the same. Death wobble is violent compared to sway being much slower of a movement.

I'm grateful for this video, I am a deathwobble survivor. Also great tip on the loading in neutral while in park

@Dirtmonkey

5 жыл бұрын

Thank you and thanks for watching !

Elastomeric Torsion Strap. Great class on proper loading. I wish more people would watch this video.

In 05 I had an f350 and was loading my skid steer on my trailer I had backed in my buddy’s driveway that was a hill, as I loaded it the ass end of my truck lifted and truck, trailer and me in the skid steer took a ride down the driveway! When I noticed we were moving I sped forward in the skid steer thinking once the ass end of the truck came down we would stop but that was not the case , it just continued skidding out in to the street where it started to jackknife my truck... only damage was a mailbox and my boxer shorts ..... definitely learned my lesson

@tractorman4461

3 жыл бұрын

Hahahahaha...my cousin ran that scenario with a single axle IH dump and a 555 John Deere hi-lift. Fortunately he was loading on the farm property so the only damage was his dignity and his shorts too !! LOL.

5:20 you couldn't help but look haha.

@rotorav8

5 жыл бұрын

Ha ha scoots over and over

This video is worth watching , Safety saves lives, People who don't know, until some one gets hurt, people need this info,

@Dirtmonkey

4 жыл бұрын

Thanks Keith !

I have the weight safe hitch and love it! I tow utility trailers, horse trailers, travel trailers and farm trailers. So nice to know exactly what your tongue weight is and not be guessing. Thanks for the informative video that will help people new to towing trailers load their trailers accordingly!!

@Dirtmonkey

5 жыл бұрын

Thank you Dave!

Good information saves time money and trips to the hospital

@Dirtmonkey

5 жыл бұрын

Thanks !!

im certainly going to remember that loading tip thank you

@Dirtmonkey

5 жыл бұрын

You're welcome! Thanks for watching Patrick 👍

Great video. This needs to be shown to everyone that tows. Not only for the guy towing but the safety of the families in the vehicles next to them going down the highway next to them

@Dirtmonkey

5 жыл бұрын

Thank you Ryan !

Thanks for the video. Trailer loading and load securing are often grossly inadequate and make for a dangerous situation to the inexperienced.

Have a manual transmission then u never have to worry about park gear

Also, those lever binders (mousetraps) are quick to use when you get the hang of them vs cranking on those ratchet binders. Just be careful unloading them 😂

I use a Weight Safe hitch for my large boat and flat bed trailer. My tongue weight varies from 700 lbs to 1800 lbs fully loaded. Great invention.

Your first point about the truck in park is bang on. I always loaded it when it is in neutral with parking break. I've seen a buddy put his truck into park when it was rolling just the slightest bit, and you can guess what happened...a trip to the dealer to rebuild his trans. Cheers.

Lol, years ago my son decided to load my Bobcat with truck & trailer pointing down the driveway, a slight down hill grade. He wouldn't listen from being in a hurry. As he drove up the ramp, the truck started raising up, then at the right point, truck, trailer, and skid steer started sliding down the driveway. He then backed off the trailer, moved to level ground to load it. You gotta love it when you can say " I told you so. Lol. Lesson learned.

@Dirtmonkey

5 жыл бұрын

Lol, yep!

@bwutschke

5 жыл бұрын

RANDALLOLOGY Q

@mrmotofy

5 жыл бұрын

It's better when they learn on their own dime in equipment

@mightySHRIMP420

5 жыл бұрын

Had a dude at work almost take my ass out doing that. My buddy grabbed me. Threw me out the way. I ripped into the dude loading the trailer.

@bobstewart9365

4 жыл бұрын

That is one senario when parking brake is useless !!!

It’s a good idea to use a couple blocks of wood or landing jacks on the tail of the trailers when loading equipment. That will prevent the tounge from lifting, and the whole setup from potentially rolling away.

@jonyemm

2 жыл бұрын

It'll also help to keep the trailer from bending. 12k Delco trailer at work lasted about 3 months with very little usage hauling 8-8500lb equipment.

You made some good points. I've been pulling trailers since a teenager. 10 years over the road wih a 53' van. I have owned travel trailers and 5th wheel campers. Now with my local job I haul about 3 different trailers every day now from low boys, pintle hitch and gooseneck as seen in my videos. Honestly we all get complacent but luckily I've never had any towing accidents and I've hauled millions of tons of equipment and freight over the years. I enjoy the "science" of towing and load securement and rigging. On my trailers I usually just chock the rear axle of the trailer unless loading on one that has air brakes. In that case the brake chambers keep the drums locked. I think I was just rambling. I'm at work so...

@Dirtmonkey

5 жыл бұрын

Thanks for the comments Jason!

I have a weighsafe hitch and it’s awesome. Great quality and the scale seems to be fairly accurate as well

Hmm I've been using smart straps that are patent pending. They basically eliminate the excess strap after tying down the load working like a tape measure in a since. But they would be loose when I get to the job site. I will check out the Shock strap. Thanks for this information!

@Dirtmonkey

5 жыл бұрын

You're welcome, thanks for watching !

Nice video.... I hope the trailer plug was installed before driving off (I could see it hanging down).

I just purchased my first trailer. I learned a lot by watching this video.

@Dirtmonkey

4 жыл бұрын

Glad to hear it, thank you !!

@robbywinters3918

3 жыл бұрын

Nice 57

Thanks for the great tips. I load my skid and excav all the time. Safety first!

Awesome information brotha! Thanks so much for the tips!! I've been too darn tongue heavy at times...and we did a video last year when the skid steer lifted the back of the truck off the ground...it started rolling down the hill!!

@joshharris9093

5 жыл бұрын

Hey glad to see you here

@StoneyRidgeFarmer

5 жыл бұрын

@@joshharris9093 yessir! Love me some Dirt Monkey! Was watching this guy before I even started my youtube channel!

@joshharris9093

5 жыл бұрын

@@StoneyRidgeFarmer loved your Apple cider video

@joshharris9093

5 жыл бұрын

@@StoneyRidgeFarmer everyone in my family and friends say I should start a KZread because I always have crazy stuff going on every day

@joej8515

5 жыл бұрын

It is great to see to watching others videos, I love both of your videos. Keep up the good work!

Many years ago when I was a kid, my dad took my younger brother and I to pick up some sand in his 4 cyl. S-10 with his high sided single axle trailer. He filled the entire bed and trailer with wet sand. I don’t know how much weight it was but I’m guessing it was about 5 times the rated capacity, but probably more. Needless to say, the trailer fishtailed and threw us off the highway. Fortunately, the truck and trailer stayed upright and no one was injured. We blew out both passenger side tires and the same side on the trailer. It was scary as hell.

@Dirtmonkey

5 жыл бұрын

Very scary! Thanks for watching and for sharing your story.

@peterf.229

5 жыл бұрын

since I worked at a big box home improvement store, the dry bags of sand you see in the white bags weight 3200 lbs dry.

@fivespeed3026

5 жыл бұрын

Peter F. I’ve never paid attention to those bags but I’ll definitely look for them next time. Just imagine it pouring over the sides of the bed and trailer and that’s how full it was.

Awesome! Thank you for sharing your experience with us. Bonus points for the humorous comments and photo bombs too. And, hope you enjoyed yourself here in Canada, even if is was only a short visit. Cheers!

Thanks for this. Great video!

A couple years ago, I was helping out a friend who needed to have several non-op International Harvester Pickups and Scouts moved from one storage facility to another facility roughly 90 miles away. I was using a constructed deck over tandem axle trailer that had belonged to my dad. The deck was only 15 feet long...yeah pretty short and the axle group was nearly centered front to back almost like a teeter-totter. WTF? Anyway, my dad had used it to haul my own Scout a couple times for me, so I knew it would suffice to haul this guy's Scouts, but his full size pickups I wasn't so sure about. The first trip I hauled one of his Scouts that was minus the engine all the way to the destination without issue. The second trip was hauling an early 70's IH 3/4 ton long bed, regular cab 4x2 pickup. It fit on the deck, just barely. I could have maybe gotten the thing another six inches further forward than I did before we chained it down. As it turns out, I should have done that...or better yet not even attempted to haul that truck on the POS shorty teeter totter in the first place. Twenty miles into the trip at a speed of roughly 50 mph, I went over a minor jostle in the road which suddenly pitched my little choo choo train into a very violent tail wagging the dog scenario. I was on the interstate too. Fortunately, there were no other vehicles nearby. Traffic was fairly light and well behind me. Only by the grace of God did I manage to regain control without winding up in a steaming pile scattered across the road. The wag probably only lasted ten seconds at most, but it sure felt like an eternity. And it seemed like the cycles were getting worse before they finally subsided. I at least knew not to slam on the brakes. Rather, I did a series of quick on/offs of the brake pedal, feathering it I guess you might say. Once I was back under control, you can bet your sweet bippy I pulled over to ahem, collect my thoughts and reflect on my recent life choices. I still had over 70 more miles to go with some 6 percent grades for good measure, plus it was raining too! But, I was committed to the journey at that point. I really didn't know what else to do, but climb back in the saddle, even though I didn't want to. I made it to the destination without further issue, but it was a white knuckle, and puckered sphincter ride the whole way doing 40 mph down the interstate! Afterwards, I told my friend about the incident and the blood drained from his face. I told him yeah, I'm sorry, but you're going to have to rent me an actual car hauler trailer for the next trip. Something with at least an 18 foot deck that has the tandems set back a bit so I can get plenty of weight on the tongue. He agreed wholeheartedly. What a difference it made to have a trailer that was properly setup to haul the next loads. Total night and day difference.

@brettblack7049

3 жыл бұрын

So did you move it forward the 6" after the incident?

with the binders,it hekps if you put a piece of fencing wire through the chain and loop on the binder handle

@gold5th

5 жыл бұрын

Here in Alberta, there's special lever binder locks you have to put on to keep the lever from popping on a commercial vehicle, wrapping the chain like in the video doesn't count.

@turbodiesel4709

5 жыл бұрын

@@gold5th : Nothing wrong with cam style load binders if properly used. Safest way I've found to secure the cam binder handles from accidentally "popping loose" is to use a piece of wire, a heavy duty zip tie, or simply wrap black electrical tape around the handle and chain. Black tape is cheap and works wonderfully for this. Tape is also handy for taping up and securing the excess unused strap length on a ratchet strap.

@gold5th

5 жыл бұрын

What "works" is one thing, but local law is you need the locks like this: images-na.ssl-images-amazon.com/images/I/41FTWuOUi7L._SX342_.jpg

Thank you! Great information! Great update for me!

I'm a heavy hauler myself wanted to tell u ur spot on good vid. For those that don't know I've seen alot of bad situations next vid should b on how to pick the rite truck for the haul

@Dirtmonkey

4 жыл бұрын

Thank you John !

I look for a 60/40 split over the axles. 60 up front, 40 at the back.

Always make sure your hitch is coupled...even though a gooseneck will likely ride not latched it won't stay when loading... It will come off and forward and will mess up your tailgate, bad. Also at home/shop I've got a ditch that I park in to load that lowers trailer to level ramps...easier to climb.

Very good video. Most trailer sway is from a load placed too far to the rear on the trailer. I've been there, done that many years ago and learned a good lesson. Loads can shift a little after a few miles, resulting in some slack in the chains. I like to stop after a while to check all chains for sufficient tension. While there, I check all the trailer wheel/hubs with a gloved hand for excessive heat from a bad bearing set or a stuck brake. As for the lever type binders, I have found them to be safe, fast and effective when installed correctly. Your results may vary. I use a 3 foot secton of pipe for leverage. When taking them off, if one got casual with the grip I could see that pipe getting tossed.

Great Video , Thanks For Sharing !

So'ooo not Australian, LOL. Love the channel, watching from down under.

@Dirtmonkey

5 жыл бұрын

Really appreciate the support Greg, thank you !!

Thank you for making this videos

@Dirtmonkey

5 жыл бұрын

You're welcome 👍

Great info thank you for taking time to educate us with safety.

great video, this is literally every lawn company in NJ, small undersized trailer, 1000lb+ zero turn mower laying back on the rear gate, 4 feet behind the rear axles....

Great video. Took my new Denali for an " adventure" while loading a 10k excavator alone on a driveway... resulting in an even newer front end on my truck and a new bumper of my wife's tahoe... good info

@Dirtmonkey

5 жыл бұрын

Thank you !

Anyone else think Stanley is the long lost twin of Richard Rawlings?

@crankshaft1053

5 жыл бұрын

Yes

@tentotwo8290

5 жыл бұрын

Soz, just said the same thing 🙈🙈🙈

@gburchett1

5 жыл бұрын

just missing the beer

@dennistrujillo4521

5 жыл бұрын

When I first saw him I thought it was Richard lol

@jacobottersbaugh6101

5 жыл бұрын

I don't know who Richard Rawlings is, but if he's the type of guy who takes 20 to do something that should take 3.... then yes. They are twins.

Thanks for the video man!

I don’t have a truck & do not need a trailer But I like the way you explain the tips 👍 Great video.

@Dirtmonkey

5 жыл бұрын

Thank you !

What scares me the most is wondering how Google knows I needed to see the info in this video. I'd encountered the loose strap problem on a 75 mile trip hauling light equipment from one of my farms to another. Thanks for the great video.

@Dirtmonkey

5 жыл бұрын

No problem Mark, thanks for watching !

@AceBoy2099

3 жыл бұрын

I was towing my dads classic in an enclosed trailer, he tied to the frame rail (hooked ratchet straps) at a fuel stop checked it out and iirc 1 rear strap was off the other loose because the car shifted, after that I tied to the axle with axle straps and it was fine for the rest of the trips.

@popwall4297

2 жыл бұрын

I know what you mean my son-in-law and I was messaging back and forth about some tires for my four-wheel drive and the next day I had several ads for tires for four-wheel drive trucks come up in my messages and on Facebook Also on KZread So they are spying on us

Never personally used the weight-safe hitches but I have seen them in use by other people and they seem solid. I'd try one if I was running a crew and had to trust inexperienced people with my equipment. The.... pool of candidates has been pretty... murky lately and everyone is sue happy these days. I wouldn't want anyone getting themselves hurt or causing anyone else to with my equipment either.

@Dirtmonkey

5 жыл бұрын

Good input, thanks !

unless you like having adventures, love it! been there, done that, got the t-shirt! you are a great asset to newbies! I've actually coached a few death wobbles (sway) as a passenger, thank god I was able to reach that brake controller. it was due to failed secure devices each time on the highway. my advice is don't cheap out on rigging. equipment coming loose at highway speed is a recipe for disaster!

Man this video has helped me understand the right way to load and tow! We are new at towing our Jeeps and I have been looking and researching the proper ways to tow our Jeeps! This was one of the better videos on demonstrating what to look for as a newbie at it. Definitely going to take your advice and watch more of your stuff! Great work. 👍🏼👍🏼

@Dirtmonkey

5 жыл бұрын

Hey thank you ! Really appreciate that and glad that you are watching

Here's my car hauler/equipment trailer loading adventure: OK. So I was working at a shop, we needed to take the bobcat out to do a job. Never loaded a bobcat. So, I told my coworker to go get the trailer hooked up while I was getting some other things, getting the bobcat. So I get the bobcat, start it up, head out of the shop, and total brain fade. I was so focused on what I was doing that I didn't even notice that my coworker had brain fade too, and just sort of forgot to hook the trailer to the truck. So I go driving the bobcat out there and start driving up the ramps.... lol .... The coupler was about 8 friggin feet in the air. Never count on anyone to get their end done while you're trying to coordinate your efforts. Because if you're not standing right there making sure they carry THEIR end of the load, then chances are it won't get done. Check EVERYTHING they do. And, pay attention! lol

@Dirtmonkey

4 жыл бұрын

Good advice Robert and thanks for sharing your adventure!!

@royhoco5748

4 жыл бұрын

check and then double check everything, your life could depend on it.

I've never had death wobble with my larger trailers, but I've had it on a 2 place enclosed snowmobile trailer (no trailer brakes required on them due to light weight). Best thing to do in that scenario is to stay off the brakes and apply some throttle. Get her straightened out, pull over and either move the load forward if possible or add some ballast to the front of the trailer.

@Dirtmonkey

5 жыл бұрын

Good advice, thanks for watching!

A comment I have on loading the trailer by yourself. I like to take a string and use it to hold my trailer brake controller locking the brakes on the trailer and setting the park brake on the truck. This eliminates almost any movement of the tow rig when loading and save you from needing a buddy to hold the brakes.

This was helpful. Showing this to my crew @ next safety meeting. Thank you.

@Dirtmonkey

5 жыл бұрын

That's awesome Jame, thank you !

Great Video! I always load my skid steer backwards as well. One other thing I do is cross my chains in the rear (so left tie down on skid steer to right side of trailer). It gives me more chain to cinch down and less to wrap around the binder (less chances of it hitting the pavement if there is only a few feet around). Again just my way of doing it and like you say everyone has the way they like best! Thanks!

@Dirtmonkey

5 жыл бұрын

Thank you! Good tips and thanks for watching !!

@JoeyCarb

5 жыл бұрын

@@Dirtmonkey I learned to load ass end first and never really thought about it being different until I worked for some other companies. I feel more comfortable loading backwards for a few reasons: 1. If I'm loading backwards and I fall off the ramp I'm less likely to flip 2. If I'm loading and I need to bail for any reason, I'm much safer doing that going forwards 3. It way easier to get off the trailer at the destination 4. Since it sits further back on the trailer I can put all my attachments or other gear like tampers or generators on the front part of trailer with the machine, then take them off with the machine later. I've been laughed at by other contractors for doing it this way but it's just what makes sense to me.

@Dirtmonkey

5 жыл бұрын

Thanks for the input Joe!

Years ago with a borrowed trailer i moved my bobcat 863 with my dodge DRW on a slight downhill slope. no landing gear on the back of the trailer and no chocks on the trailer wheels. raise your hand if you know where this is going... as you guesed the trailer leveraged the back of the truck off the ground and away we went till i mashed the sticks and transferred weight back to the back end of the truck. and yes i needed a new pair of shorts.

@Dirtmonkey

5 жыл бұрын

Lol!

@devilish34

5 жыл бұрын

been there ... lol now I try and keep the 100gal transfer tank full as possible

@timhubert3367

5 жыл бұрын

Ram-n_dodge that happened to me once but we had no other possible to load the skid steer

@animal6463

5 жыл бұрын

Ram-n_dodge

@officialyoutubecommentator4357

5 жыл бұрын

Oh Doug your Nanna is calling. (You'll get that later)

I love those lever binders!! Much easier than trying to screw those damn other ones. What a pain

Another great video, Stan. Thanks for all your information you provide.

@Dirtmonkey

5 жыл бұрын

Of course, thanks for watching Don!

My trick is I have cut a 2x4 that I push against my brake pedal and wedge in front of my seat and that holds the brake on when I load up my equipment. I also put my truck in 4 wheel drive and the parking brake on.

The parking brake only applies to the rear wheels if you load something heavy and the rear wheels come off the ground you will still roll around the best thing to do is put your truck in four wheel drive then engage the parking brake you should be good to go then chalk the wheels if you want to be extra safe if your truck has trailer brakes too get a spring-loaded clamp that you can use to squeeze the brakes on

@rickcavanaugh1

5 жыл бұрын

Don't chalk the tires. That won't help at all and just messes up the pavement or concrete. Plus it is hard to do in gravel. I would chock them instead. ( I know, I know... I'm an a**hole ) LOL

@snorman1911

5 жыл бұрын

@@rickcavanaugh1 LOL!

@mute8s

5 жыл бұрын

@@rickcavanaugh1 Yeah, but at least you're an entertaining a**hole. It was funny because as I was reading your comment I was thinking "How is that gonna mess up the pavement?" Then I realized the spelling mistake and about fell over. It's always nice to see a mistake like that pointed out using a bit of humor rather than doing what most people do and call the guy names. I know I will make an occasional error and I like to be made aware of my mistakes as long as I'm not being called an idiot at the same time.

@carlhall1880

5 жыл бұрын

What you need is an approved loading and unloading zone were u tie down your vehicle! Lol

@johndias6614

5 жыл бұрын

@rickcavanaugh ... maybe sidewalk chalk would work OK. I always carry sidewalk chalk to use to point out people who park like jerks. BIG arrows on the pavement pointing to the offender along with a few choice words.

What a great video, thank you very much.

Great Video, Thanks

always when transporting anything that you have secured. within the first 45 miles you need to stop and check all securement. then every 2 hours thereafter

@Dirtmonkey

5 жыл бұрын

Good advice ! Thanks for watching

@Wjc128

5 жыл бұрын

Its 50 miles then 3 hours or 150 miles which ever comes first per DOT regs

@kubotaman3440

5 жыл бұрын

That's what I do exactly stop check everything's periodically

@scottfuchs9793

5 жыл бұрын

My grandpa did that all my life selling horses, check his load.

@brettblack7049

3 жыл бұрын

@@scottfuchs9793 yep, hate when those straps come loose on the horses 😆