I bet there's a cart of 10mm wrench's lost in that factory somewhere. Haha

@danr1920

3 жыл бұрын

They live with single socks and ball point pens.

@gregoryp2859

3 жыл бұрын

I thought it was just me.

@Jager-er4vc

2 жыл бұрын

That cart is either there or in my garage somewhere. Hanging out with all of my #4 Allen wrenches no doubt. Just laughing at me. Waiting for the next member of the club to join.

@Jager-er4vc

2 жыл бұрын

@@gregoryp2859 you are not alone brother!

@millermike5739

Жыл бұрын

I thought I was the only one

*watches video featuring snap-on* Snap-On: "How would you like to pay?"

@keatonmiller7883

3 жыл бұрын

500 bucks a week for the rest of your life

@garyv2196

3 жыл бұрын

Snap-off

@tallswede80

2 жыл бұрын

me: "fuck you, I'm buying Knipex and Stahlwille."

I think I just went broke watching these being made.

From 1:45 to 2:20 the wrenches shown are not Snap On branded, but rather are Bahco wrenches (a subsidiary of Snap On, and originally, a very old Swedish company). The wrenches have a thinned out neck just behind the open end and the handle is slightly fatter than a Snap On wrenches, below the thinned out area.

If I filmed this video my camera case would weigh about 200 pounds more then when I came in. 😁

@128ajb_02_Music

3 жыл бұрын

Getting some 10mms?

@dekoldrick

2 жыл бұрын

Gotta leave with more than you need. Probably loose a few on the way to the car.

I can’t imagine doing the same repetitive thing tens of thousands of times a day. I would go mad.

@crisdlcruz145

3 жыл бұрын

Its easier the more you do it

@MrBlackey666

Жыл бұрын

I love it. I run a turret press and it’s basically, you load up punches and dies per the job traveler. Then you load up the desired material and send it. 20 minutes of hammering but I usually watch a KZread video while it runs

I've got mechanic buddies that all started out with less expensive tools(Craftsman) and slowly replaced them with MAC/Snap-on because of the quality and longevity of the tools. Rarely break/round off and lifetime warranty.

Snap-on "for all shapes and sizes" but not all pockets

@scroungasworkshop4663

4 жыл бұрын

jose luis rodriguez. Just the deep ones. 😄

@RGD0756

4 жыл бұрын

True - but, you only buy them once -and, more importantly, Snap - On wrenches, ratchets, and sockets WILL NOT SLIP. If you’ve ever had a wrench or socket slip and cause you to jam your hand into a machine or engine block, you learn to appreciate that.

We can all bust our knuckles with pride knowing what went into making these.

Rich women buy designer purses, rich mechanics buy SnapOn.

Not worried about copyright infringement taking someone else’s work and monetizing it to yourself, your mommy must be proud of you.

One wrench is stamped Snap-On, then the next twenty are stamped Pittsburgh

@cameronwilson4782

2 жыл бұрын

😂 yeah no

wow , now that makes me wanna get some nice affordable wrenches,.

Very expensive wrenches but for the flank drive plus i think they are worth it, i work with alot of rusted equipment and it saved me a couple of time as for standard, whatever floats your boat

They're good tools, any honest mechanic will say that. But also, an honest mechanic not stricken with shop vanity will admit you can buy other tools for 1/2 the price of snap-on and can earn the same size paycheck.

@dekoldrick

3 жыл бұрын

I don't care what brand of tool a mechanic use on my car as long as they get the job done right.

@Agent-vj3ns

2 жыл бұрын

Yeah but can they call to get a replacement tool dropped off at the shop same day? Can they send their pneumatic and battery tools in to be rebuilt rather than just buying another one? Do your Husky and Pittsburgh wrenches have Flank Drive Plus? Go back to your junk yard shack Kevin.

700 million dollars worth of wrenches can be seen in this video

@jimthomas777

5 жыл бұрын

TheGarywilliams , but only $7 worth of steal , what a profit , and if you miss a payment the snap on man comes a takes the tool back , good thing I bought my life time guaranteed Proto tools years ago , I like waving at the snap on man when he drives right on by

@chadpugh1490

5 жыл бұрын

701 actually lol. No worries. Harbor Freight will put Snap-On out of business if they're not careful.

@mikey4016

4 жыл бұрын

And then Harbor Freight will jack up their prices like all of the other slave-traders have been doing once they get a monopoly.

@Pro1er

4 жыл бұрын

@@mikey4016 Correct. They're already doing that with their Quinn and Icon brands. Check out the prices on the Icon tool cabinets, (warning, not for the faint of heart).

@bestamerica

4 жыл бұрын

hi T... ' not important to put comment in here about currency 7... dont need it

Last a lifetime? Except 10MM wrenches. They disappear into nooks and crannies never to be seen again.

@ZerokillerOppel1

5 жыл бұрын

Or smaller ones...the 6-7, the 8-9....

@joebledsoe257

5 жыл бұрын

ZerokillerOppel1 no argument

@kerkiraz

5 жыл бұрын

Joe Bledsoe I work on boats and I swear to fuck they magically can disappear into know where 👍

@Colorado_Native

5 жыл бұрын

Look between the seat and the console. There's some kind of black hole that pulls things in. Especially valuable things. Oh, and food crumbs, and cell phones.

@user-oy7yr5qy9y

5 жыл бұрын

Joe Bledsoe 我老婆都沒有想到我的

Use to work for Armstrong tools doing sockets and wrenches loved the work hell it's the only place I ever worked where I got a sun tan indoors

@Mikey-ym6ok

5 жыл бұрын

Richard Przybylek try welding lol

I'm sorry how easy and automated was that production. Why are they the price of a small house ??

I have broken many wrenches thru the years, and from my experience i have learned a few things: 1) Any wrench is good, if use properly; 2)any wrench can/will break if use with a big enough snipe; 3) There are only 5 wrench forging plants that make the whole array of wrenches that u'll find on any shelf and it's the magnaflux process that distinguishes the quality of the wrench- it is what determines which brand name it will be stamped with, and every brand will have forging imperfections.

The first pressed wrenches they showed are still snap on but they are actually there cat version of the wrench slightly different shape a fair bit beefier

This work is very tight

I really love the music in this one, would anyone know where to find a source?

I'm not a full time mechanic, but I do refuse to pay a shop for something I can do at home. So, I own Craftsman wrenches, ratchets, and sockets. Bought them in a 192 Piece set. I opened it when it was new, and the 1/4" drive ratchet didn't have a ball/spring in it at all. But, they replaced it. Also bent a 9/16" wrench, which they replaced. Decent tools, but snap-on is better.

@tesmith47

5 жыл бұрын

At least 4x the price

@Mikey-ym6ok

5 жыл бұрын

Thomas Smith you’d have to put a mortgage to buy a wrench

Give a big hand to the mighty mechanical equipments👏👏👏

I always thought little kids in China carved them out of solid steel.

@MegaJohnhammond

5 жыл бұрын

they do now.

@Mikey-ym6ok

5 жыл бұрын

Craftsman sure

@oreogonzalez8123

4 жыл бұрын

They helped make the machinery to make the wrenches and then we stamp USA on them and made millions.Lol

@meyou245

3 жыл бұрын

Snap-on still makes hand tools in the USA, but all the power tools are made in china

@Mopars_41

3 жыл бұрын

@@meyou245 not all of the power tools, my 14.4v lithium are made in China, but my 18v lithium are made in usa. Both snap-on.

Interesting. I was wondering if the box end was a brooching process, or part of the stamping step.

Snap On- "That be 500 for 1 wrench."

Nice video

I saw "Drop forged" embedded on my wrench, came here to see the whole process

In the UK we call them "spanners." Not "deli meats."

what is the DIN or ISO standard to know the maximum and minimum tolerance to insert a hexagon bolt? Also What is the angle tolerance to turn the bolt ?

Fuck yeah Snap-On, making Wisconsin proud!

@johnneytilley4165

6 жыл бұрын

cmucky. Grey is the best

@tarlach1280x960

5 жыл бұрын

Only an idiot thinks all these tools that snap-on put out are made in USA...

@Mikey-ym6ok

5 жыл бұрын

The packers certainly aren’t.

how its made has videos on every miscellaneous item in existence. I knew when i searched how wrenches are made they were gunna have it

On this side of the pond, the two types are called open ended spanners and ring spanners. The ring spanner with a notch in it, is just called a hydraulic spanner.

@ZerokillerOppel1

5 жыл бұрын

In Dutch it's called a linespanner. Leidingsleutel.

Wow, who would of thought, a snap on tool is made exactly the same as every other brand.

Rando using the open end when the safest end is the box end.

Very nice

When I was a mechanic in the 60's one of the other mechanics his father worked at PROTO in Los Angeles he would come visit us about once a month, he would bring a box of 2nds wrenches, with the PROTO name ground off but the size and part # was still there, he would pass them out to the mechanics, I still have a couple of them 9/16" combination wrench 6 point, and an open end 1/2" with one end 75° head angle, memories 😆😆😆

does anybody know when was this patented? or by who? i cant find anything on google..

Never did see those deli meats get made... :(

@HamguyBacon

5 жыл бұрын

probably a good thing.

@danr1920

3 жыл бұрын

The workers ate them for lunch.

thanks alot

Despite the narration that identifies the box end as a hex, it is a double hex, or 12-point. In both box-end and socket wrenches, the purchaser must choose between hex and 12-point designs. Most people go for hex because it allows a shorter swing in tight spaces before moving the wrench to the next hex on the hardware. Also, some lightweight and aerospace hardware has 12-point wrenching surfaces, on which a hex will not fit. On the other hand, 12-points are necessarily thinner than hex at the periphery of the wrench, and also do not contact as large an area as a hex head. Because of this, hex heads are preferred whenever they can be used, as they are less likely to break (the wrench end) or round off a bolt when high torque in necessary. Professional mechanics usually have sets of all applicable wrenches, including short and deep sockets, and possibly universal sockets (wiggle-tails), box end wrenches and combination wrenches, in both hex and 12-point varieties. Expensive, but they are professionals, right?

@Hopeless_and_Forlorn

8 жыл бұрын

+Hopelessand Forlorn In third sentence above, meant to write "12-point" in place of "hex." 12-point = shorter minimum swing on a hex. Sorry for the error.

@Davobeff

6 жыл бұрын

Cool story bro could of done with more dragons.

@FourDollaRacing

5 жыл бұрын

And a pedantic wizard!!!!

I personally prefer kobalt tools. I used to have snap on but replacing tools was just ridiculously expensive. I haven't had a failed set yet. I also have some craftsmen wrenches from way back in the beginning of the 2000's and they are pretty good too. I hear the new ones are garbage though...

@lsx_moe

6 жыл бұрын

Ob Fuscated I agree. All my craftsman wratchets are 13+ years old and they're great

@FourDollaRacing

5 жыл бұрын

It's a small world....Kobalt was previously made by Snap-On! And, now made in the same Chinese factories....

@TheUSMC17

5 жыл бұрын

@@FourDollaRacing made in kenosha and some tools made in spain

@Mikey-ym6ok

5 жыл бұрын

Kobalt is such shitty products.

Классные ключи 🇷🇺👍

Look! A how it's made featuring a company I actually recognize!

@ZERO_42069

7 жыл бұрын

right lol

This is how Snap On wrenches are made,and I consider their production process to be inferior to that used by our iconic brand SIDCHROME.Sadly Sidchrome was bought out and closed down,the name remains but it is now Taiwanese made..viewers should watch "Sidchrome,The early years" on KZread,to see the special process Sidchrome did at the billet stage that NO other manufacturer in the world did...and cemented their reputation for quality .

@zuestoots5176

5 жыл бұрын

not at all, harbor fright has a line of tools that are made in the same building as Snap On and about the a 10th of the price. PittsBurg. great tools at a small price

whats the name of BGM??? great

Apparently, the process at 3:38 is skipped by chinese wrench manufacturers.

@mugshotmarley

5 жыл бұрын

Yet, I've never had a Chinese manufactured wrench snap/break from too much pressure. If anything, the nut/bolt would either strip or cross threat first.

@Mikey-ym6ok

5 жыл бұрын

Heat treating makes metal brittle and prone to fracture.

@henrychan720

4 жыл бұрын

Michael Smith that’s what tempering afterwards fix

Super

I have exactly 4 SO tools in my extensive collection. All 4 are broken, and because I’m not a professional and regular customer, they will not replace them. Don’t waste your money. Buy used USA made tools. They are far better quality. Much cheaper.

this music is awesome

Nice

I like it

I used craftsmen and other then started buying snap on. I won’t buy anything but snap on anymore, yeah I pay a lot but never had one break, and I find myself not using tools to remove rounded off fasteners and broken bolts now. Pay up front for precision tools or pay on the backend for time wasting. Keep in mind I work on my tractor trailers where it’s common to see bolts torqued in excess of 600 ft lbs.

@shobud7561

5 жыл бұрын

Ive been a mechanic for over 40 years and ive never had a Craftsman Wrench Ratchet Socket extension fail me yet ! Thing Is i bought all my craftsman tools back when they were made out of quality materials, im talking late 60s early 70s . I actually have a Craftsman combination 9/16 wrench i found somewhere thats actually has Craftsman stamped on one side and Taiwan on the other , Pretty pathetic huh ... Nothing is made in the US anymore because of the all mighty dollar.... Now if you can afford Snap-on tools that great , but as i see it there way over prices and a waist of your hard earned money.... I have Snap On and Mac tools ive picked up over the years , The bottom line is " any hand tool you buy now days comes with a lifetime guaranteed . The professional ( tool companies l) has just about priced theirselves out of a job ! JMO .

@tarlach1280x960

5 жыл бұрын

Only idiot that doesn't know how to use a wrench breaks them.

I did not see a wrench worth $85 in this whole damn video

They said won't bust your knuckles in tight spaces well that's a lie

Snap-on, the choice of better mechanics since 1920. And worth every cent.

Go TEKTON!

Since when is hexagonal 12-sided? 😁

@peteriliev

5 жыл бұрын

Actually is 24-sided - 120 degrees Polygram 12/2 star

@ED4action

3 жыл бұрын

3:52 right next to the hydralic bolts...

@taylorwyant7709

3 жыл бұрын

6 is hex

@taylorwyant7709

3 жыл бұрын

They call it hex because it bites on 6 sides

I'll stick with my SK's. Had them for way over 20 years, working on everything from 1020 Unit and 1220 Unit cranes to cars and trucks. They cost out the wazoo, but they are way worth the cost. Snap on's are for pro mechanics working on lite duty items, but SK's are for industrial machines and worth every dollar spent.....

@mikspapa

3 жыл бұрын

@@burp1914 A scrap yard long since gone in Kansas City. Worked there over 2 decades, and not a day goes by that I don't miss that place and the insanity that went with it....

Great tools...if you can afford another mortgage on your home

remember folks. a 5/8 is a 16mm. some kits dont come with a 16mm if they have both SAE and Metric

@bradwiza198

5 жыл бұрын

Zues Toots 3/4 and 19 is the closest match, then 5/16 and 8 mm second, 5/8 and 16 third

@MaximRecoil

4 жыл бұрын

@@bradwiza198 5/16" is exactly half of 5/8" and 8 mm is exactly half of 16 mm, so the closeness of the match between [5/16", 8 mm] and [5/8", 16 mm] is the same: 5/16" = 7.9375 mm, which is 99.21875% of 8 mm 5/8" = 15.875 mm, which is 99.21875% of 16 mm 1/2" and 13 mm are pretty close too (1/2" = 12.7 mm). A 1/2" wrench fits 13mm fasteners tighter than a 13 mm wrench does. A 13 mm wrench is kind of loose on a 1/2" fastener, but will often work anyway, as long as the fastener isn't too tight, or doesn't need to be tightened all that much.

@bradwiza198

4 жыл бұрын

MaximRecoil No it’s not, 8mm is closer do the math. 24.5 mm to 1 Inch. 5/16=.312 8mm=.3265 5/8= .625 16mm=.653 5/16 and 8mm .014 difference and 5/8 and 16mm =.028 difference.

@MaximRecoil

4 жыл бұрын

@@bradwiza198 "No it’s not, 8mm is closer do the math." Is that a joke? I already showed you the math. Here it is again: 5/16" = 7.9375 mm, which is 99.21875% of 8 mm 5/8" = 15.875 mm, which is 99.21875% of 16 mm Percentage is what matters with regard to how close two different sizes match, not the raw difference between the two sizes. When you increase two sizes by equal amounts, the closeness of the match between them never changes, obviously, because the percentage never changes. Also, 1" = 25.4 mm, not 24.5 mm.

@bradwiza198

4 жыл бұрын

MaximRecoil They are not identical, clearly you have never used a wrench before. I just showed you they are not identical. Once again, do the math.

severe lack of puns.

All of you quit arguing that Craftsmen wrenches are just as good as Snap-On, they aren't: Craftsmen wrenches are only made to suit the basic needs of someone who doesn't need tools often. Snap-On wrenches are made for professionals, however they are egregiously expensive. The best cost:quality ratio you could get is a Wright Tool wrench(industrial tools). They aren't horribly overpriced and can even rip the head off a bolt.

@bb4jdmlude

9 жыл бұрын

Wright makes very nice tools. I bought wright impact sockets over snap on ones because the price was huge dif

@leonspringsboystv2025

7 жыл бұрын

chain3519 My Duralast flex head is identical to a Matco or snap on...for only 20$ vs 200$ a snap on... lifetime warranty too...fuck snap off

@obfuscated3090

6 жыл бұрын

I ran military and civilian toolrooms and am an aircraft mechanic among other skills. I generally agree with your post! However it should be mentioned that Snap-on make many outstanding specialty automotive tools not always available elsewhere. Craftsman wrenches aren't really a problem, but when they changed from the old ratchet mechanism on their ratchets THAT was a fuckup! Coarse teeth and indifferent machining make them unreliable. My personal tool kits are a mix of what works from a wide variety of brands.

@svs8909

5 жыл бұрын

fuck snap off

I'm not sure if 15 combination wrenches were made in this video

What is up there! Where can I search them music that was used as a background , thx!

@Eagles0690

4 жыл бұрын

Shazam or SoundHound

Snap On only makes tools for large wallets though.

@donmunro144

3 жыл бұрын

I finally payed off my snapon account 8 months after i retired.

You have given the world, a purpose to live. Thanks Westerners

Would you show how magnets are made

@alexg.6393

5 жыл бұрын

kzread.info/dash/bejne/iYyKs6qyZ8KwabA.html

What the Hell are they doing using those wrenches?! It's Snap On! Wipe your oily prints off of it and put it back in the display case! There are plenty of Harbor Freight wrenches you can use instead. What were you thinking. If you scratched one...

Man it takes lot of work.

Stahlwille makes the worlds best spanners. Nothing even comes close

@smallenginedude71

9 жыл бұрын

i totally agree. stuff snap on.

@bb4jdmlude

9 жыл бұрын

LOL not ever close to true

@smallenginedude71

9 жыл бұрын

bb4jdmlude i bet u love snap on. they are ok. but are overpriced. my dad spent 180 dollars on a swivell head snap on retchett.(he is a mechanic) it broke on him in a few years. now for 180 dollars i would expect for it to last much longer. his sidchrome and kincrome tools have lasted longer! have you tried stahlwillie. no probably not id say you have your heart set on one brand and say everything else is crap. if you tried stahlwille and felt the spanners you would love them. they fit the nut perfectly and are very strong. they are also still made in germany.

@bb4jdmlude

9 жыл бұрын

Well my snap on 3/8 has been with me thru 3 years of being an auto mechanic and now 2 years of being a millwright working on machines. I have yet to break or strip it. Also my other buddies have snap on ratchets and none of theirs have broken either. 1 had the screw come out of the flex head end. My snap on dealer replaced it with out even blinking

@smallenginedude71

9 жыл бұрын

snap on are not a bad brand at all. my dad uses some snap on sockets and one of their 3/8 ratchets. but spanners he uses stahlwille. the stahlwille spanners have been around for yonks used everyday.

..so why do flare nut wrenches cost soo much more?? Next time i need them i'll just break out the grinder and cut a set of box wrenches.

@ED4action

3 жыл бұрын

they are alot thicker and based on 6 sided design.

As a bike mechanic...I say Park Tool!

@literoadie3502

7 жыл бұрын

I really hate how park tool rebrands non-bike-specific tools like combination and adjustable wrenches, allen wrenches, pliers etc. They should stick to cone wrenches, BB and other speciality tools.

@kztimmins

6 жыл бұрын

Park is made by snap - on isn't it?

Bluepoint (a satin finish clone of the snapon) is now made in Taiwan. But now their polished like a wavy ocean. Barf. If you look on snapons website you'll see a lot of snapons shit is being made over sea's now. But the prices are still outrageous like highly paid US union workers made it...

@righteouslord4499

7 жыл бұрын

ladefreakndah on the

@TheUSMC17

5 жыл бұрын

What isnt made in kenosha is made in spain

@1835dueber

5 жыл бұрын

you must be highly paid. you're fired.

👍👍👍

SNAP-ON TOOLS SINCE 1920

Damn I had to sign a contract to finance this video

Wow

if i can give you a hint: try an older set of stahlwille. thank me later

@phillipbainbridge9107

3 жыл бұрын

If I lived in Germany I might, but I don't so I won't.

At 3:29 the wrench is still jacked up.

Snapped a Snap-On wrench once... No warranty... Never again...

4.04 didn’t fit very well

Statesiders still do not adopt the metric system yet, although they use in wrenches, and they know what a 9 mm. is

@Daschickenify

4 жыл бұрын

I wish we would, working with metric is so easy.

Are these made in China?

21.04.19 - bet process have been brought into the 21st century.

Ranches?

Old video. Way back when SnapOn was made in the USA

@trumpstroll7438

5 жыл бұрын

You mean they are not anymore?

@backpocketmechanic7751

5 жыл бұрын

@@trumpstroll7438 snap-on has never made a tool in their life, they are just a brand that puts their name on it and marks it up, the company Blue Point is who makes their wrench's like in this video, that's why they sued the shit out Harbor freight when they came out with the exact same car jack as snap-on because they went to the same manufacturer and got the same jack and sold it for $200 while snap-on was charging $500. The court ruled they're idiots and have no ground because they didn't produce it then self's. Bottem line, snap-on have never made a tool

@edwardthayer9386

5 жыл бұрын

Sad but true! Snap-On is sold in Pepboys now!😂🤣

@howardlogan1816

4 жыл бұрын

@@backpocketmechanic7751 Dead wrong! I've toured the factory and seen the wrenches being made, right here in the USA. Snap On bought the Blue Point Wrench Company in the late twenties as they needed more capacity and this was a cheaper alternative than building a new factory. Their jacks used to be manufactured be Lincoln, but now are Chinese.

@prevost8686

4 жыл бұрын

C Hill You have no clue what you’re talking about.

Who in the their right mind can afford snap on anymore.

@Mopars_41

3 жыл бұрын

A lot of people I guess, me being one of them and I just started almost a year ago , have nothing but snap on and mac tools.

@benfairhall5331

3 жыл бұрын

I can’t imagine what you do for work but wouldn’t you want to be earning your money with the most precise tools on the market? They might be over priced but the pros far out way the cons

What plating process are they using instead of chrome?

@SnakeRiverFishing

5 жыл бұрын

nickle she said

@michaelmccarthy4615

5 жыл бұрын

@@SnakeRiverFishingnickle for cleaning and prep Trivalent chrome for finishing.

I won’t mind if u send me some snap on tools.

1:20 what kind of hammer is that, how many tons?

@epistte

4 жыл бұрын

Its a closed die forging press.

An 8 hours wash is a bit extreme

@willsco76 I've used the same nobrand tools for five years now. Isnt that much that can go wrong with one.

That's not a hexagon! We learned this as small children! Unless it has 6 sides it's not a hexagon!

@HamguyBacon

5 жыл бұрын

said hexagonal not hexagon

@HamguyBacon

5 жыл бұрын

@NickoLps hexagonal doesn't mean 6, Hexagon means 6, Hexagonal means a shape that looks like a hexagon.

@eurobum2012

5 жыл бұрын

@NickoLps And if you run a hexagonal broach through a hole twice at different angles, you get what?

This video is great, includes 2 of my favorite things... TOOLS AND FOOD !!!! LMAO

Well, Snap On is definitely quality. But I can understand how a DIY prefers Craftsman. It will get most of the jobs you need done and not kill your pocket. BUT, if you have the money, Snap On all the way.

@tarlach1280x960

5 жыл бұрын

Did you even watch the video....

Yep @ Collins

4:05 "ye call that a wreench?" (Aussie accent)