How I Straighten my Cutting Plates for my Big Shot!
Тәжірибелік нұсқаулар және стиль
Hello and welcome everyone! I hope you have been enjoying a wonderful weekend.
Today I hope to share some tips with you on how I deal with the cutting plates for my Big Shot or possibly other manual die cutting machines. This is what I personally do and it has worked for me. It is purely my own solution to this problem.
Here is the link for my Facebook Group Fans of Angela Kerr Designs: groups/32647...
Here is my Etsy link for my NEW and current Printed kits in my store: Etsy as Angela Kerr Designs or etsy.me/2RR1qhm
For all my Favourite tools: Including all I have used in today's project can be found in my Amazon Favourites lists below.
My Amazon Favourite Crafting tools list UK: www.amazon.co.uk/shop/angelakerr
My Amazon Favourite Crafting tools list USA: www.amazon.com/shop/angelakerr
My Amazon Favourites Crafting Tools List Canada: www.amazon.ca/shop/angelakerr
My Amazon Favourites Crafting Tools List Germany: www.amazon.de/shop/angelakerr
My Amazon Favourites Crafting Tools List Australia:
www.amazon.com.au/hz/wishlist...
As an Amazon Associate I do earn a small commission on qualifying purchases at no extra cost to you.
You can find me on: (links on my KZread main page!)
Instagram at: Angela Kerr Designs or Angelakerrdesigns
Etsy as Angela Kerr Designs or etsy.me/2RR1qhm
Pinterest: Angela K. pin.it/%2BTh0V1q
My email which is: Angelakerr2468@gmail.com
My Facebook Group: Fans of Angela Kerr Designs
Have fun crafting!! 🤗
Angela x
Thank you so much for watching.
Disclaimer: this video is not aimed at, or intended for children.
Creative Commons licence: A Night Alone
Category: How to and style
Пікірлер: 292
I’ve recently found a similar video. A lady heating her plates in a tray in the sink with boiling water for 20 mins. Soaking. She weighted it down with more boiling water to keep the heat going. It worked. Her husband (engineer, scientist ) said please don’t do it in the over at higher temperatures because Perspex plastic will release toxic fumes! Maybe not at 170 degrees C, I don’t know, but listen, it could. Also listen because it works at only boiling point, 100deg C, so it’s not necessary to heat up your whole oven, just boil some water. Getting the plates wet also releases all the bits into the water, as if by magic! As the plastic relaxes. She didn’t wrap them in foil either.
@hp77
6 ай бұрын
I will try that, thanks I think we should all get together N inform the company they NEED to improve the cutting plates this is ridiculous each time we have to either try and straighten it out ourselves from boiling water or put it in the oven or just buying new ones. This is so unacceptable. What do U think.
@jl4643
5 ай бұрын
I am new to this. Got my big shot foldaway for Christmas & already it’s warped. I tried using a blow dryer which didn’t help. I wonder if this is partly why it’s being discontinued. @@hp77
@fatima-zahrakajji4821
5 ай бұрын
Can you post the video link?
@vickygarris6150
4 ай бұрын
@@fatima-zahrakajji4821kzread.info/dash/bejne/lWSOrdqKfLeZd8o.htmlsi=fEekIwU4Tc66J8EY
@DonnaJo3452
4 ай бұрын
I haven’t used any directions on straightening my plates, I haven’t found that need to except for one set, and I already had extra ones so I guess in the future I’ll be using directions to straighten them! The KZread creator’s name that the lady below mentioned is Jennifer McGuire. If you search warped plates in her channel you’ll find her video. An interesting tidbit is her husband was on the team that invented Press and Seal! Thanks to Angela for letting us know how she straightens her plates!
This is brilliant! One thing that I also do to prolong the life of the plates is I always put a piece of that super thick, hard craft paper between the cutting part of the die and the plate. Not only does it significantly reduce where on the cutting plate, but then whatever paper I am actually cutting doesn’t end up getting embossed with scratches from the cutting plate.
@AngelaKerrDesigns
Жыл бұрын
That is a great tip!! Thank you so much for sharing it with me. I will give it a go. Hugs and smiles 🌸☺️🌷💗🦋
Well done
Oh my gosh, you have no idea how this drives me crazy and how many plates I have gone thru with my die cut machine! Thank you SO MUCH for doing this video for us!! You are a life saver $$$$
Wow! I was about to buy some new plates Thank you so much
Thank you Angela from an 88-year young woman in New Zealand. You'r a life saver. xx
I have never seen this done this way. Good to know!
@AngelaKerrDesigns
2 жыл бұрын
I am glad you have found this useful, Jessica! Thank you so much for watching lovely lady! 🌸☺️💗
Hello, thank you so much for sharing this video! I just tired it with my Spellbinders cutting plate and it worked like magic!! For me, this works so much better than using boiling water!
Brilliant!! Thx for sharing.
Thankyou for sharing this great tip
Wow! Thank you for sharing this great tip! 🙏😃
Thank you! I really need to do this!
I don't know how I missed this one, Angela, but I'm glad I found it! I once broke a plate in half while using it -- it was very bent (I have the normal-sized Bit Shot). So I had to buy a new set. But now, hopefully, I won't have to do that again! I have one very bent plate now, so I'm off to beat it into submission ... but I will use your method instead! (I should've known you'd have a solution to this problem!) Hugs from Ireland!
I love this idea
Thank you Angela!!
Thanks for the great tip,
@AngelaKerrDesigns
2 жыл бұрын
You are so welcome, Carol! I am so pleased you found this helpful. Thank you so much for watching. Hugs and smiles 🌸☺️💗🦋
Brilliant! Clever idea. Thank you x
@AngelaKerrDesigns
2 жыл бұрын
So glad you found this helpful Sandra. It is not my own idea, but one I have used for a long time now. Thank you so much for watching xx
Amazing!! Thank you so much for sharing!
@AngelaKerrDesigns
2 жыл бұрын
You are so welcome! So pleased you have found this useful. xxx
Great idea! Thanks for sharing that tip!
@AngelaKerrDesigns
2 жыл бұрын
You are so welcome, Carol! I am so pleased you found this helpful. Thank you so much for watching. Hugs and smiles 🌸☺️💗🦋
Amazing! Thank you so much! ❤
Excellent. No idea how much money I have spent on new, replacement cutting plates! Thank you!!
@AngelaKerrDesigns
2 жыл бұрын
Glad I could help! Than you so much for watching. I am so pleased you have found it helpful xxx
Wow! What a great tip. Thanks for sharing ❤
@AngelaKerrDesigns
2 жыл бұрын
You are welcome, Carol! So glad you have found it helpful. 🌸☺️💗🦋
Wow, thats awesome - thanks for sharing!
@AngelaKerrDesigns
Жыл бұрын
You’re welcome Samantha!! Thank you for watching! Hugs 🌸💗☺️
Ty so much Angela for such a great tip.xxx
@AngelaKerrDesigns
2 жыл бұрын
You are so welcome, Carole, I am so pleased you found this helpful. Thank you so much for watching. Hugs and smiles 🌸☺️💗🦋
Great tips Angela. Thank you so much for sharing with us. 😘🌺🤗💖
@AngelaKerrDesigns
2 жыл бұрын
You are so welcome dear Jean! So glad you found this too helpful dear lady. Hugs and smiles 🌸☺️💗🦋😘
Thank you for sharing this.
Many thanks for sharing such a great idea!!!! Will try it I
@AngelaKerrDesigns
2 жыл бұрын
Thank you so much for saying so, I am so pleased you have found this helpful. xx
Excellent great idea tfs 😊🤗
Oh my gosh this is an awesome trick. Thank you so much for sharing. Hugs and smiles!
@AngelaKerrDesigns
2 жыл бұрын
You are welcome! So glad you found it helpful! 🌸😋💗
Wow, absolutely fantastic tip🥰
@AngelaKerrDesigns
2 жыл бұрын
So pleased you have found this helpful, Look. Thank you so much for watching, Hugs and smiles ☺️🌷🦋🌸🍁
Oh my goodness .... Thank you so much for sharing this. Really great 🥰
@AngelaKerrDesigns
2 жыл бұрын
You are so welcome! I am so pleased you found this helpful. Thank you so much for watching. Hugs and smiles 🌸☺️💗🦋
Wonderful. I’ll try this right away. Thank you so much ♥️
@AngelaKerrDesigns
2 жыл бұрын
You are welcome! I am so pleased you have found it helpful! 🌸☺️💗
Remarkable result, Angela. Thanks for the tip.🌸
@AngelaKerrDesigns
2 жыл бұрын
You are welcome, Karen! So glad you found it helpful 🌸☺️💗🦋
Great tip. I will have to try that. Thank you for sharing
@AngelaKerrDesigns
2 жыл бұрын
Wow, so pleased you found this useful! 🌸🦋☺️
Brilliant it worked Wow!
@AngelaKerrDesigns
2 жыл бұрын
Yay, I am so pleased you tried it, Jacqui! 🌸☺️💗🦋
Oh wow what a fabulous idea I’ll definitely be trying this, thanks so much for sharing 😊
@AngelaKerrDesigns
2 жыл бұрын
You are welcome, Veronica. Hugs and smiles xx
That is amazing! Thanks for sharing, I will definitely use this 😊 💗🌸🌼🌷🌹🌻
@AngelaKerrDesigns
2 жыл бұрын
You are so welcome Elizabeth. I am so pleased you have enjoyed this xx
Genius!! I will have to keep this in mind when I get mine! Thanks for sharing, Angela!
@AngelaKerrDesigns
2 жыл бұрын
You are so welcome Kerri! So glad you found this helpful! 🌸☺️💗
Great idea Angela! I’m gonna have to give it a try! Tfs! 🤗🤗🤗🤗Deanna
@AngelaKerrDesigns
2 жыл бұрын
I am so pleased you found it all helps Deanna. You are so welcome. xxx
Awesome tip!! Thank you so much!!!
@AngelaKerrDesigns
2 жыл бұрын
You are most welcome, Katherine, Thank you so much for watching, So pleased you found it useful. xx
Amazing how that worked. Thanks for sharing this great tip!
@AngelaKerrDesigns
2 жыл бұрын
You are welcome, Karla! So glad you found it helpful! 🌸☺️💗🦋
JUST WOW!!!!!! I was planning to order new plates this week. THANK YOU, THANK YOU!!! 👏🏽🙌🏽💜
@AngelaKerrDesigns
2 жыл бұрын
You are welcome! So glad you found this helpful! 🌸☺️💗
Wow, this is such a wonderful tip, dear Angela! Thank you so much for sharing!!! 🤗👍💕🌸💕
@AngelaKerrDesigns
2 жыл бұрын
You are welcome Lily! So pleased you found this helpful! 🌸☺️💗
Boy did I need this info. Thanks so much
@AngelaKerrDesigns
2 жыл бұрын
You’re welcome, Pat! Hugs and smiles 🌸🌷💗☺️🐰
Thank you Angela. 🌸You are a marvel. 💐 I’ve never thought of doing this. Xx 🌸
@AngelaKerrDesigns
2 жыл бұрын
You are welcome Vicki! It was not my original idea, but one I read about long ago. The plates work so much better when straightened. 🌸☺️🦋
FAB top tip- this vid is going straight in to my "important videos to refer back to" playlist!! Thank you so much
@AngelaKerrDesigns
2 жыл бұрын
You are most welcome, Anna. So pleased you have found it helpful. xx
That’s a great tip Miss A! Thank you for sharing 🥰🥰🥰 will definitely give this a tryout when needed 🥰🥰🙏🏻🦋
@AngelaKerrDesigns
2 жыл бұрын
You are so lovely to say so, Miss B! Thank you so much! Hugs and smiles 🌸☺️💗🦋
Thanks for the tip I only have a small die cutter machine but the plates are expensive so i am going to try this.
Wonderful idea will definitely be trying this with my Big Shot plates…TFS
@AngelaKerrDesigns
2 жыл бұрын
You are so welcome, April! So pleased you found it helpful. Hugs and smiles xx
Thank you for sharing your tip!
@AngelaKerrDesigns
2 жыл бұрын
You are most welcome! 🌸☺️🦋
Thank you Angela!!!That's a great tip ,next time i will try it!!!
@AngelaKerrDesigns
2 жыл бұрын
Thank you so much Liette! So pleased you have enjoyed this! 🌸☺️💗🦋
Hi Angela, what a great tip for our die cut plates. I’ve never heard this before, and will give it a try. Thank you!!!
@AngelaKerrDesigns
2 жыл бұрын
You are so welcome! I am so pleased you found it useful. Hugs and smiles 🌸☺️💗🦋
Excellent!!
I think this is the best solution out of all the ones I have seen. Thanks a bunch!! TFS Hugs and Smiles
@AngelaKerrDesigns
2 жыл бұрын
You are so welcome! I am so pleased you have found this helpful, Lori. Thank you so much for watching and your kind words. Hugs and smiles xx
Good idea!
Great video! I soooo need to do this! Thank you
@AngelaKerrDesigns
2 жыл бұрын
You are so welcome! So pleased you found it helpful! 🌸☺️💗🦋
thank you very much for the tip, it was very valuable 👏🏼👏🏼👏🏼😉
@AngelaKerrDesigns
2 жыл бұрын
I am so pleased you have found it all helpful, Vera. Thank you! xx
Excellent tip, thanks. That will save a lot of money. Xx
@AngelaKerrDesigns
2 жыл бұрын
Thank you so much! I am so glad you have found it helpful. Hugs and smiles 🌸☺️💗🦋
Wow I’ve never ever thought about doing this thanks for the tip way cheaper than buying new plate tfs xxx
@AngelaKerrDesigns
2 жыл бұрын
You are welcome, Karen! So pleased you found it helpful. Hugs and smiles 🌸☺️💗
Thanks for sharing. Happy crafting on a budget 💲. Happy everything on a budget💲. See👁 you in the next 🎥 and on the flipside. 👼🌹
@AngelaKerrDesigns
2 жыл бұрын
Thank you so much Vanessa! So pleased to hear that you have enjoyed this 🌸☺️💗
Thanks this was a great demo!
@AngelaKerrDesigns
2 жыл бұрын
You are most welcome! So glad you found it helpful, Odette 🌸☺️🦋
I’ve never seen this method before. Wow! Works great!
@AngelaKerrDesigns
2 жыл бұрын
Thank you Michel! So glad you have enjoyed this! I hope you consider giving it a try. 🌸☺️💗
Great tip
Fantastic tip Angela - Thank you - I was just about to purchase new plates so I’ll give this a go first 🙏
@AngelaKerrDesigns
2 жыл бұрын
That is great Sharon! I am so pleased you are going to give it a go. 🌸☺️💗
Thanks for sharing your ideas
@AngelaKerrDesigns
2 жыл бұрын
You are most welcome, Cecilia. SO pleased you are enjoying them. xx
Thanks for sharing Angela🌸 you’re a little gem💎💖X
@AngelaKerrDesigns
2 жыл бұрын
You are most welcome Linda. SO pleased you have found it helpful. Hugs and smiles xx
Wow oh wow! That works like magic. I bought new plates through Wish, and one broke the first time I used it. They were rubbish. I'll be definitely trying this to revamp my old plates. I have both the big shot and big shot plus, so this will save a lot of money on new plates. Thank you for sharing Angela xxx
@AngelaKerrDesigns
2 жыл бұрын
I am so pleased you tried it and it has been useful. I do hope it saves you lots of money on plates, Linda. Great news. Hugs and smiles xxx
Excellent tip! TFS! 🥰
@AngelaKerrDesigns
2 жыл бұрын
You are so welcome! Thank you so much Debbie. Glad you found it helpful. xx
You clever clever girl well done 😊👍
Thank you so much will try
Wow, this is a great tip. I still have been reversing them and turning them often, but going to try this next time they need it. Thank you so much.
@AngelaKerrDesigns
2 жыл бұрын
You are so welcome, Dorothy! I am so pleased you have found this helpful. It does work. Hugs and smiles xxx
MAGIC!!! M sooooo happy you showed us how to do this before I went out to buy new plates for my Big Shot. Thanks so very much Angela! XOX
@AngelaKerrDesigns
2 жыл бұрын
You are welcome dear Hilda. Thank you so much for your kind compliments. I can feel your excitement! 🌸☺️💗🦋
I hadn't seen this method of straightening cutting mats before. Seems fairly easy to do. Thank you for a great video.
@AngelaKerrDesigns
2 жыл бұрын
You are welcome. It really was easy. So glad you found it helpful. 🌸☺️💗
WOW that's fantastic! I have 4 plates I need to do. Thanks for sharing Angela! ❤🌹😃
@AngelaKerrDesigns
2 жыл бұрын
That’s fab, Cindy! You are welcome! So glad you found it helpful! 🌸😋💗
Amazing but simple. Thanks.
@AngelaKerrDesigns
2 жыл бұрын
You are welcome Michelle! 🌸☺️🦋💗
Thank you Angela that is a great tip. Never seen it done this way before. I have an A 5 and fairly new so they are not bended yet, but i keep it in mind for the future. Tfs Hugs xxx Sonja
@AngelaKerrDesigns
2 жыл бұрын
Yes, you never know, Sonja! You are welcome! So glad you found it helpful! 🌸😋💗
Wow, I have never seen this before. I just got my new big shot a week ago and will keep this tip in mind for when the plates gets really bent :) thank you for sharing this tip Angela.
@AngelaKerrDesigns
2 жыл бұрын
You are welcome Ilder. So pleased you have found it helpful. Hugs and smiles xxx
@pauletteburk3176
Жыл бұрын
I got my new sizzix hot shot electric just today and I have already warped it and scratched it. I warped it I think when I used the 3d embossing folder with the incorrect plates. I was sick over this. I will try your idea but my husband recommends I use my heat press. Has anyone done that?😊
Thanks Angela!
@AngelaKerrDesigns
2 жыл бұрын
You are so welcome, Nettie! I am so pleased you found this helpful. Thank you so much for watching. Hugs and smiles 🌸☺️💗🦋
That's totally amazing!! What a great tip Angela!! TFS!! Hugs, Liz:)
@AngelaKerrDesigns
2 жыл бұрын
You are welcome, Liz! Hugs and smiles 🌸💗🦋🌷☺️
Angela this is so helpful. I have a couple of sets of plates to do. Thank you, Jeanette
@AngelaKerrDesigns
2 жыл бұрын
You are so welcome, Jeanette! xx
wow great idea thanks for sharing
@AngelaKerrDesigns
2 жыл бұрын
You are welcome Laura! So glad you found it helpful! 🌸😋💗
Thank you. I’m going to give it a try🙂
@AngelaKerrDesigns
2 жыл бұрын
Thank you so much Donna. So pleased you found it helpful. 💗☺️🦋🌸
thankyou so much its saved me so much 💓
@AngelaKerrDesigns
Жыл бұрын
That’s awesome!! So happy for you. 🌸☺️💗🦋
Gracias Angela.
@AngelaKerrDesigns
2 жыл бұрын
Muchas gracias. Estoy muy contento de que lo hayas disfrutado. Abrazos xx
Hi Angela, Thanks for the great tip. I did buy new ones before I saw you video but will now try this with the old ones as I haven't yet thrown them !!!!
@AngelaKerrDesigns
8 ай бұрын
You are so welcome! I am so pleased you are keen to try this out. It worked very well for me. Hugs xxoo
Thank you Angela💜💜😘
@AngelaKerrDesigns
2 жыл бұрын
You are welcome, Kathy! Thank you for watching xx
Thanks so much for sharing. This is so useful. 😊
@AngelaKerrDesigns
2 жыл бұрын
You are so welcome! thank you so much for watching xxx
This is such a great tip thank you so much! x
@AngelaKerrDesigns
2 жыл бұрын
You are welcome! So pleased you found it helpful. 🌸🍁💗🍂
GREAT TIP !! Mine are so bent and I have been procrastinating about buying new ones. I am so happy I don't have to buy new ones. Thank you so much for sharing. PS: I love your work. Everything is soooo pretty and I LOVE pretty things 😄 😄 Chrissy From Australia
@AngelaKerrDesigns
2 жыл бұрын
You’re welcome, Chrissy! So pleased you have found this helpful!! Thank you so much for watching and for your lovely compliments. Hugs and smiles 🌸☺️💗🌷🦋
Oh, thanks for sharing this! My plates get so warped up and I’ve tried lots of things to straighten them out! Can’t wait to give this a go!
@AngelaKerrDesigns
2 жыл бұрын
You are so welcome! I am so pleased you have found this useful, Susan! xx
I am thrilled to have this information. I use heat to flatten my "magic mat" but did not know that the acrylic mats could be saved, amazing.
@AngelaKerrDesigns
2 жыл бұрын
I am so pleased you have found this helpful, Dee Anna! Thank you so much for watching xx
That's amazing 👏 thank youuuuu
@AngelaKerrDesigns
Жыл бұрын
You’re most welcome! Thank you so much for watching! 🌷🧵✂️🌸☺️💗🦋
I did it yout amazing lady keep giving us your amazing support ❤️
@AngelaKerrDesigns
Жыл бұрын
You’re most welcome, Debbie! So pleased you have found this helpful!! Hugs and smiles 🌸☺️💗🦋
Brilliant!
@AngelaKerrDesigns
2 жыл бұрын
So glad you liked it, Wendy! Thank you so much 🌸☺️💗🦋
Hi Angela , I came across this absolutely amazing, lifesaving video this afternoon when I was desperately looking for a way to help my plates - because I actually can't afford new ones!! You're an absolute legend for discovering this 🥰❤️❤️ Now I'm off to 'stalk' your journals that others are raving about in the comments!! Much love Cathi in Australia xx
@AngelaKerrDesigns
Жыл бұрын
I am so pleased that you found this too useful Cathi! It does work a treat. Thank you so much for your amazing support! I hope you enjoy the journal videos too. Hugs and smiles to you in Australia!! 🌸🌷☺️💗😘
I never knew you could put them in the oven! Gotta give it a whirl. Thanks for sharing this tip!
@AngelaKerrDesigns
2 жыл бұрын
Give it a whirl Barb! It works a treat. You are welcome xx
I will certainly give this a try. I tried another method that didn't help, but this looks much more promising. Thanks!
@AngelaKerrDesigns
2 жыл бұрын
I am so pleased you are keen to give this a go. It worked very well for me and the plates are still straight. xxx
Thanks so much Angela!! I was just about to replace mine again because I didn't think anything could be done.
@AngelaKerrDesigns
2 жыл бұрын
You're welcome!! So glad you have found this useful, Patti. Hugs and smiles xx
Awesome! Interesting! Practical! I don't have one, but still... TFS🤗
@AngelaKerrDesigns
2 жыл бұрын
Thank you dear Nancy! You are so sweet! 🌸☺️💗🦋
Brilliant Idea I love it, I must try this. I also saw someone use Self-healing cutting mat's I will try this for sure.
@AngelaKerrDesigns
2 жыл бұрын
I love that idea, Ann. I will look out for those. Hugs and smiles xx