How I made this Dragonox Cigar | 4K video
Тәжірибелік нұсқаулар және стиль
This was definitely an exciting project and took lots of extra time to record and edit. But the end result was awesome. Gotta love the dark titanium scales. Let me know what you think about the Dragonox Cigar and this video.
Tools and parts used in video:
- Ferric Chloride (for acid etching): amzn.to/3E2rj5e
- Worksharp Ken Onion: amzn.to/49XuwCs
- Peening Hammer: amzn.to/3rICTBb
- Diamond Files: amzn.to/3M3gMw6
- G10 for liners: amzn.to/3xEKK0C
- Brass rods for reassembly: amzn.to/3eRsYid
My Website:
f2scustoms.com/
My Instagram:
/ fit2survive_
Ferric Chloride (for acid etching): amzn.to/3E2rj5e
Worksharp Ken Onion: amzn.to/49XuwCs
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/arnito/niafunke
License code: SK9PEKNMLXJVXENM
uppbeat.io/t/arnito/chemin-et...
License code: GNVAAHUEO0VQJ6NN
uppbeat.io/t/sky-toes/the-lon...
License code: TNPYT96QJ0BHGLDO
uppbeat.io/t/ben-johnson/cant...
License code: MZ4BDFTTT5KA54WA
uppbeat.io/t/hartzmann/space-...
License code: OYA0K0WPIVHRA75W
uppbeat.io/t/arend/tides
License code: NXWRXX6BCRJGUWHP
Пікірлер: 163
A very elegant build! A nice selection of tools...your client will be the envy of his fellow stogie smokers when he fires one up after he crisply snips the tip...Nice!😊
@NorfTec
3 ай бұрын
As a cigar smoker i can assure you if somebody pulled that beauty out I’d be very envious
@FittoSurvive
3 ай бұрын
Thanks. Yeah, it is definitely one of a kind.
@FittoSurvive
3 ай бұрын
😅 Glad to hear that.
You gained a subscriber. Awesome build.
@FittoSurvive
2 ай бұрын
Awesome. Thanks for the sub.
Not so keen on the acid edge look usually but I’ve got to say on that it looks fantastic, Epic job! And those brass pins against the scales absolutely pops! Great build your a true craftsman 👍👏
Dope AF results, @FittoSurvive!
@FittoSurvive
Ай бұрын
Thanks a lot.👍
We always get amazed when watching you do your magic. You are one of a kind matey. Cheers from Australia.
@FittoSurvive
3 ай бұрын
Thanks! Glad to hear that. 👍🏻👍🏻
Great video, its cool to see how you make these. There is so much that goes into each build.
@FittoSurvive
3 ай бұрын
Thank you for appreciating the effort that goes behind these builds.
One of the very best you’ve made ! And with all that wenger tools it is quite unique.
@FittoSurvive
3 ай бұрын
Thank you! It definitely is a unique one.
Your videos are perfect to destress with, keep up the good work!
@FittoSurvive
Ай бұрын
Glad to hear that. 😉
Cigar affectionato will love this
@FittoSurvive
3 ай бұрын
Yes, definitely. Otherwise it's just an odd tool to have in a knife.
Amazing job as always!
@FittoSurvive
3 ай бұрын
Thank you!
Amazing creativity and craftsmanship. wow.
@FittoSurvive
3 ай бұрын
Thank you very much
Amazing work, just Amazing.
@FittoSurvive
3 ай бұрын
Thanks a lot!
thats a huge and cool custom!
My Victorinox Cigar is my favorite cutter, hands down. This is a neat project!
@FittoSurvive
3 ай бұрын
Awesome. Glad to hear that.
Великолепная работа ! Талантливый мастер 💪💪💪🔥🔥🔥🔥
@FittoSurvive
3 ай бұрын
Спасибо большое. 👍🏻👍🏻
Incredible work!
@FittoSurvive
3 ай бұрын
Thanks a lot!
Execelente video me gustan las navajas muy muy padre tu trabajo te felicito 👍👍👍👍👍
Very, very good !!! Congratulations ! ( Brazil )
@FittoSurvive
3 ай бұрын
Thank you! 👍🏻👍🏻
That flames titanium turned out 🔥! Thanks for this video, i just rann in to trouble with a mod of my own but peening the scales like this solves it! A workshop tour video would be cool to see 👍
@FittoSurvive
3 ай бұрын
Thanks. I was really pleased with the flamed titanium as well. Glad I could possibly help with your project. A workshop tour video... I'll have to think about that. Definitely an interesting idea.
Realy cool build
@FittoSurvive
Ай бұрын
Thank you!
Epic!!
Awesome build! I’m gonna be doing a custom compact soon and I’d be stoked if it turns out half this good 😂
Як завжди чудовий огляд!!! Було б ще цікавіше одразу знімати і краш тест цих ножів в роботі і повному їх функціоналі! Наприклад нарізання, відкривання банок, пляшок.
@FittoSurvive
3 ай бұрын
Thanks. That's an interesting idea. I might build a Dragonox some time and do a stress test on it.
Cody is a god! Awesome video gonna have to add a compass to my build😅
@FittoSurvive
3 ай бұрын
LOL Thanks.
Nice to see a new build video
@FittoSurvive
3 ай бұрын
Next will be either the clear SAK or my first 111mm Spydernox.
@jaysonwilson7882
3 ай бұрын
Nice would love to see the 111mmspydernox@@FittoSurvive
@FittoSurvive
3 ай бұрын
@@jaysonwilson7882 It's coming soon.
amazing job
@FittoSurvive
3 ай бұрын
I'm glad you like it!
Great video
I've missed these build videos. Great work. Also, fwiw, I watched someone use a pair of Nail Punch Sets in a pillar drill - held in a pillar drill vice at the bottom and the chuck at the top - to form a nice domed rivet head in mild steel (so it should also work great in brass). With the chuck spinning, it didn't appear to take much pressure to form the head of the rivet.
@FittoSurvive
3 ай бұрын
Glad to hear that. That's a very interesting idea, definitely worth trying.
Pretty cool.
@FittoSurvive
3 ай бұрын
Thanks!
Шикарно 👏
@FittoSurvive
3 ай бұрын
Спасибо!
just found your channel. cant wait to order a custom
@FittoSurvive
3 ай бұрын
Glad to hear that you found my KZread channel!
I hate the fact this channel exists, it just makes me want to spend more money. Beautiful work as always, keep up the good work
@FittoSurvive
3 ай бұрын
LOL I try my best. 😉
@CNYKnifeNut
3 ай бұрын
I'll take this all day over channels like Fablades or Bladezilla.
@FittoSurvive
3 ай бұрын
@@CNYKnifeNut Thanks a ton! I really do appreciate that.
I love this mod. I use this same kind of tool for my cigars, the cigar cutters on this tool are some of the best. I have always looked to something more upscale like this. if you decide to make another for purchase or if this one is for sale please send me a note, I am interested.
Very nice 👌 ❤
@FittoSurvive
3 ай бұрын
Thanks 🤗
You have a job of my dreams!
@FittoSurvive
3 ай бұрын
I am quite fortunate... 😄
very cool mod! with the corkscrew instead the phlips, it could become the new standard-tool in getmo... ;) (and thanks for showing how you make the "effects" on the metal :)
@FittoSurvive
3 ай бұрын
Thank you. Yeah, I can see what you mean.
Классный нож получился. Заглядение
Stunning, the Titanium processed to a beautiful finish
@FittoSurvive
3 ай бұрын
Thanks! I was very pleased with the results.
cool
Fantástico, a mi me gusto con doble argolla
@FittoSurvive
3 ай бұрын
Thanks! Interesting, I think I've actually seen a Victorinox with double rings before. It may have even been on your Instagram page.
I've gathered all the parts to do a Dragonox Golfer with the cigar cutter but using 91mm parts.
@FittoSurvive
3 ай бұрын
Sounds like an interesting project. 👍🏻👍🏻 Best of luck.
As a cigar smoker, had some bad experiences with those type of cutters in the past, but it does look awesome tho !
@FittoSurvive
3 ай бұрын
Not sharp enough?
Awesome video! I cant wait to get these style knives in my collection. Are you getting closer and closer to completing orders? I have been in que for a year now.
@FittoSurvive
3 ай бұрын
Thank you! I got behind on my orders in 2023... But I am doubling down and working on getting caught up. I must confess though, these build videos set me back each time. They take a bunch of extra time...
I think in this case fits better the corkscrew, some one who loves wine and cigars would appreciated more... but as always good job, good video...
nice
@FittoSurvive
2 ай бұрын
Thanks!
You could use the sigar cutters to strip the insulation of thick electric cable's
Awesome build Cody. I imagine the bottle opener still locks under pressure?
@FittoSurvive
3 ай бұрын
Thanks! The bottle opener has that odd section on the back for that. It has stayed the same as original.
Awesome, as usual. Hey, (It popped into my head while I was watching the video) why don't you use a press instead of a hammer to crimp your rivets at the end? (something like a modified small drill press, (if I translate correctly))
@FittoSurvive
3 ай бұрын
Thank you! Just a press wouldn't work because it would bend the brass rod. But like you said a drill press with a blunt tip might work well. It's definitely worth trying.
Knocking the inox out of Victor! 😁👍
@jamessquair6829
3 ай бұрын
Just curious why you swapped the corkscrew for a screwdriver - cigar and a glass of wine? Maybe
@FittoSurvive
3 ай бұрын
LOL 💪🏻
@FittoSurvive
3 ай бұрын
Good question... This was a custom order, so my client requested the philips.
@jamessquair6829
3 ай бұрын
‘Nuff said then😊
👍👍👍👍
@FittoSurvive
3 ай бұрын
👍🏻👍🏻
Very cool! Is the G10 liner thicker than the stock liner? I appreciate your skills!
@FittoSurvive
3 ай бұрын
Thank you. The G10 liners are 1mm thick just like the original liners.
Impressive work as always! How long does a jar of FeCl3 like that last you?
@FittoSurvive
3 ай бұрын
Thanks a bunch! I can do about 30 knives (complete toolsets) before the acid needs to be changed.
Из титана какой марки сделаны накладки? Какое масло использовано для их чернения?
Really great work! What make are the scales?
@FittoSurvive
3 ай бұрын
Thanks. The scales are titanium.
This guy is LOTS (lord of the SAKs) 😂
@FittoSurvive
3 ай бұрын
😅👍🏻 Thanks!
Супер 👍
@FittoSurvive
3 ай бұрын
Спасибо
maaan i fckin love this chnl
Is the smoothness/sharpness of the scissors ever affected by the etching and washing?
@FittoSurvive
3 ай бұрын
The Victorinox scissors are "self sharpening". So they still perform the same after acid etching.
fantastic customs. where can I find the titanium scales for this victorinox cigar ? thanks. Nico
@FittoSurvive
3 ай бұрын
Thanks! Here's where I found them: a.aliexpress.com/_msGPesq
I have the standard cigar cutter Victorinox, and I would love to have it customized. Where are you based?
sick build but the cigar cutter needs a shiny, sharpened edge
@FittoSurvive
2 ай бұрын
Thanks. Hmmm... Might be right.
Use the cigar cutter to trim the ends off pickles.
That was very cool. But also in my very autistic psycho-rigid Victorinox fanatic mind I was like "oh gosh stop, you're hurting it!" XD
@FittoSurvive
Ай бұрын
Thanks. LOL Yeah, it can be rough sometimes to take a good knife apart.
Where do you get spare parts?
@FittoSurvive
3 ай бұрын
I get my spare parts from knives that I have disassembled. But here's a website that sell spare parts from a Swisschamp: multipartsstore.com/products/parts-from-91-mm-victorinox-swiss-army-knife-1-part-for-mods-or-repair?_pos=1&_sid=499f579a2&_ss=r
How much for a build like this.
Hello! How can I order this exact knife? Same colors same knife Thanks
@FittoSurvive
Ай бұрын
Hey, please check out my website. www.f2scustoms.com
How do you custom a 91mm owl into 58mm titan?
@FittoSurvive
3 ай бұрын
You'll need to modify the pivot bore and do some grinding on the awl for it to fit in a 58mm.
@kacper2713
3 ай бұрын
@@FittoSurvive Thanks!
Its a pickle slicer shaped like a pickle 😂
@FittoSurvive
3 ай бұрын
🤣👍🏻👍🏻
Ah yes the Victorinox “Mohel” 😂
Quail egg scissors
@FittoSurvive
3 ай бұрын
Love it! 😂👍🏻👍🏻
12:05 в каком масле охлаждаете титан ?
@FittoSurvive
3 ай бұрын
Я использую масло для швейных машин.
What’s pricing like ?
@FittoSurvive
3 ай бұрын
Originally the price for a build like this was around $400. But, now Victorinox has discontinued the Victorinox Cigar models. That really drives the price up. So, it'd be closer to $500.
How much would something like this cost?
@FittoSurvive
2 ай бұрын
I couldn't even give an estimate right now, because the Cigar Cutter is now discontinued and the price fluctuates.
@ameralsalek8148
2 ай бұрын
@@FittoSurvive thank you for your reply but I was wondering about the price for the work. I have one of these I could send in
How can I get one?!
@FittoSurvive
3 ай бұрын
Check out my website for information on how to order one: www.f2scustoms.com
new mod idea gerber multipier ?
Victorinox pocket circumciser.
@FittoSurvive
3 ай бұрын
😂😂😂
can I buy one of your Dragonox as a gift for my brother?
@FittoSurvive
2 ай бұрын
I do accept custom orders. I am currently booked out for over a year though. Check out my website for information. www.f2scustoms.com
The cigar cutter could be used in an emergency circumcision if need be
İ want do this 💳
@FittoSurvive
Ай бұрын
👍👍
How much for tools box😂😂..
@FittoSurvive
3 ай бұрын
Oof... I don't even know what price tag I'd have to put on my parts box. LOL
You said fortunately so now im sorry but Internet law demands I ruin it now, but don't worry ill be gentle. How ever the method of extracting information that it could be used for won't be very gentle
@FittoSurvive
2 ай бұрын
😅👍🏻👍🏻
Promo sm 😘
@FittoSurvive
2 ай бұрын
👍🏻👍🏻
I would cut carrots
@FittoSurvive
2 ай бұрын
👍🏻😁
Jew knife
@FittoSurvive
Ай бұрын
😅