Back in the days, 25/30 years ago, when we still had mandatory army service (≈ 1 year after high school), we all got one of those to our gear, exactly that kind. Great channel 🙂

@MeatHarmonica

17 күн бұрын

Kids today would be better off if military service was still mandatory

@warwarneverchanges4937

15 күн бұрын

The 3 crowns on the sheet, is the Swedish Army stamp of approval, yet its the basic kit knife. Later on if you had signed up for trench foot and really loved eating mosqitoes cause you watched too many rambo movies you recived A1 fällkniven a much larger pice.

Mora makes great knives. Awesome restoration. They have made the Classic number 2 for over a century.

That turned out better than new. I’m giving it a 10 plus! Awesome results. I’d be proud to own that any time!

I’ll never unsubscribe - fellow knife enthusiast/ collector/ lover etc 😅 👏 Thanks 🙏

A beautiful restoration. 9+. You erased the stamp on the right side though.

And why for hell do you remove the mora lettering ? That was the best part of a restoration, mate you make me crazy 😅😊😊😊

I have this memory that this was from the mid to late 1980s based on the plastic sheath. The belt loop would break within the year and people hated the plastic design of the sheath as it made the knife feel cheap.

We have several of these in our summer house. I've always looked at them as being old memories, but basically junk. But this has inspired me to see that they could be given a new life.

Mora is my favorite knife. Sharp as a razor, light and has many options all at a great price.

@philiplaurell1163

16 күн бұрын

Quality is not that good though. These are knifes bought by construction workers, used for a short time and then disgarded. They are nice when knew for as long as it lasts

@JH-lo9ut

10 күн бұрын

​@@philiplaurell1163they make the knives for different applications. The newer knives with plastic grips are made for the construction worker market. They are cheap, but made from high quality tool steel. They are edge-hardened and will retain an edge for longer, but are difficult to re-sharpen. Older knives with wooden grips are usually of a different steel quality than the plastic ones and are easier to sharpen. You can even find Mora knives with laminated steel. They've made dozens of models over the years and made changes both in terms of materials and also visual design changes. It is sometimes hard to say what type of steel is used in specific models, just from looking at the handle and sheath, but the old ones are always worth a closer look because some of them are superb quality blades.

Этот нож ещё до реставрации был в хорошем состоянии! Не сильно повреждён корозией! Поэтому мастеру не составило большого труда довести его до идеального состояния! Мне понравилась ваша работа

Wonderfully done! You definitely have an affection for Mora knives.

A solid 10.

Beautiful work!

The sound quality on this video is truly immersive!

Amazing Restoration 👍🏻👍🏽👍🇬🇧🇬🇧

I couldn't begin to tell you the year in which that particular knife was made but I give you a 10/10 on the knife restoration. The one thing I didn't understand about the sheath was why didn't you heat it up to make the belt holes flat, or was that the way it was made? I'm not a knife or restoration expert so I have to ask.

@JH-lo9ut

10 күн бұрын

The belt slots on this model of sheath were flat from the factory, but they were a bad design and you needed to pry them apart real hard in order to thread them on a leather belt. The belt loop used to be a separate piece made from leather or pvc and riveted to the sheath. These were much softer. Later models were re-designed so that the middle piece was offset from the others, making room for a thicker belt. Most workers would not carry the knife on a belt though but hang the knife from a button on their overalls, either on the bib, by the hip or on the thigh. Hanging the knife from the belt is pretty awkward when you sit in a car or on a chair. It's also in the way if you want to use a tool belt or if you work outside and wear a jacket. So most guys actually carry the knife on the thigh pocket next to the folding ruler. Swedish work clothes usually come with these dedicated knife buttons so you can choose wich way you want to carry your knife. You can see the top of the slot has a wider hole to go around a button.

I ❤ MORA knive. Good job👍

Excellent job as usual!

As always, another awesome restoration, keep bringing new life into old items bro 👍👍

Its always awesome to see a master at its craft, amazing video, enjoyed it throughly!!!

Very nice work once again a definite 10 !! The shine is amazing it looks and cuts fantastic!!!

I love my Moras, best knives I ever own. Feel good in the hand, size is baby bear just right. Sharp. Just great knives.

Lovely restoration!

Gotta give it a 9. If you engraved the made in Sweden back on the blade then it would be a 10

Well done

10 for sure , I enjoy watching your channel !

Another amazing restoration, I believe that knife looks better than it did when it was new! Great job!!

I'm going to give you a 9/10 for that Rextoration. That's very close to the best I've ever seen. Looks like new. 😎

Unbelievable. Great workmanship.👌

Beautiful knife Beautiful restoration good job well done

I rate it 9.9, the sheath repair is as good as it can get, but a new sheath would be better.

Such a great restoration.

чудовий ніж. Маю такий у користуванні багато років. Не знаю яким чином - але ніж довго тримає заточку, хоч сталь загартована не на високу твердість. Також зменшив підпальцевий упор, щоб поліція не причепилася за ХЗ

@ReXtorer

17 күн бұрын

Але ці моделі і зараз продаються. Здається, по товщині клинка по ХЗ не проходить

the ones we had in the airforce 1980 had a wooden handle and no finger guard and a very carbon steel blade.

Amazing!

11 just nice and elegance 🇻🇪👍🏻💯👏

Amazing work on that very rusted Mora. I hope to discover on in the future. I would rate that a 10. E veryone of those I have seen has that broken section on the sheath's belt loop.

10. Excellent job 👏🏻

AWESOME RSTORE/REFINISH JOB.Crazy I have the exact set up in a E.Jonsson,funy thing my scabbard belt loop is broken as well ;] .My scabbard seems to be a molded over leather plastic coating,I've not seen this before.

Amazing! Rating 10.

That’s a 12! 👍😎👍

A 10 from me. A lovely restoration.

Only down fall is nobody's going to know if it was a Frost knife you sanded of the maker's mark😮

Nice!

Nice

Great job 10/10 👏🏻👏🏻

9/10 great video!

Nice work!

trade mark at the blade desapear, but ok, nice restoration.

good job man.

Gut gemacht 9,5/10😊

Great restoration bro.... 10/10

10/10. Hello from France 🇨🇵

9/10 Points. If you had stained the handle it would’ve been 10.

Beautiful work, have you ever tried sending videos like this to Mora and asking if they'd be willing to re-stamp the trademark back onto the blade?

@ReXtorer

9 күн бұрын

Thank you! No, I didn't try

great work 10/10 , love me a mora got more than a few

Very nice, 👍

Awaome! Good as new! :) Too bad you weren't able to keep the engraving. 90% of stuff made nowadays is not made to be able to be fixed/restored... A shame.... :/ May I ask how do you come across so many of this knives? 🙏💪

This is a 10/10

Mantab sekali bos...kelihatan bagus sekali...

Looks like brand new, so here's an 11 for ya!

Eugen, du hast ein echtes Talent!!! 👏👏👏 🇺🇦👍👍👍

Everyone that is not a fan of cleaning has one of these in some toolbox in Sweden

Красивый нож, и разбирать удобно. Вещь! 10/10

Супер,я в захваті...10!

10/10 !!! ;)))

Крута робота! 12 балів!🙂👍

Very nice, I give it a solid 8. Have you considered nickel plating the small parts? A new sheath would have made it a 9.5. I have Mora knives and I always throw the plastic sheaths away and make a nice one.

10/10

9/10 🎉🎉

Definitely 10

11/10

nice

Restaurada faca 🔪😉

10!!!

Beautiful video! 10/10 if you had kept the lettering :)

WOW 😃😃💪💪👍👍👍👍👍👏👏👏👏👏

10!

Mora Classic 612.

You are my favorite no.1

Lavender Dude watching this: "i had the same type of knife. I used it for doing the things i did"

Отлично, но спинка клинка у моры специально обработана нарочито грубо - она выполняет функцию кремня для добывания огня.

Великолепная работа , но есть вопрос - для чего отмачивать клинок в нежную каком растворе , для снятия ржавчины , если все равно перед шлифовкой клинка вы обрабатывает его нождачкой. Может вымачивание можно просто пропустить ?

Жаль, клеймо на клинке затёр. А так работа на отлично.

I’ve seen you say it takes 10 plus hours to sand some of these things you restore, how many days all together does a restoration take?

✌👍

What do you spray on the blade before sanding? WD40?

I have of those

It would have been nicer, and more respectful to the former user and the maker, to keep the knife like in 5:55, with the logo intact and some lovely pitting. Only thing to add then is a sharp bevel. This extreme high polish is for knives not meant to be used again.

Dumb question but can’t the rotary brushes remove the rust as well? Seems like you’d be able to skip the vinegar bath and scrubbing step

@ReXtorer

9 күн бұрын

If the rust is hard, then no. Also, the whole workshop will be in the dust

Odd that they make the #1 with that strange guard and cut a large hole in their already flimsy basic sheaths. Strange. 🎸🔪

10 out of 10. Great restoration. You definitely are very skilled at this.

Do you have one for restoration?

I bet it wasn't that shiny when brand new.

borderline 11 (Gone Fishin)

I give you a 9 because 10 is perfect. It’s very hard to make something perfect.🇺🇸👍🤪

@ReXtorer

9 күн бұрын

Thanks)

Вітаю! Яку краску ви використовували для ручки і як підібрали відтінок?

@ReXtorer

16 күн бұрын

Шляхом візуального підбору. RAL 3005

20 😊

I'm not an expert at all, I just like to watch different restoration videos, so a simple question arose - would it be a big time saver to have an elecric handheld belt sander, compared to a regular sandpaper?

@ReXtorer

17 күн бұрын

Electric sander for rough processing. The finish will still have to be sanded by hand.

Hultafors out of 10