Good old 2.0 TFSI

@jacobdzik6238

2 жыл бұрын

🤣❤

@iantaylor620

2 жыл бұрын

So is the balance shaft issue a common problem? I have an Octavia VRS with the KO3 turbo engine with 112,000 miles and I'm a bit concerned!!

@TRHamza

2 жыл бұрын

@@iantaylor620 it’s not common if the car is well maintained. But well worth doing if buying a used TFSI where you don’t know the history too well

@iantaylor620

2 жыл бұрын

@@TRHamza it does have a great service history but I'm not sure what's caused it to seize on your S3. Great content by the way love the channel, and thank you for the reply.

@ttarmo

2 жыл бұрын

@@iantaylor620 They wear down and usually first drops the oil pressure. When they are grinded enough they just seize up but I think that is very rare. Usually its just oil pressure problem and you have to change the whole assembly. VIS freewheel is supposed to fix that problem preventively.

It’s always a good day when hamza posts a video

@TRHamza

2 жыл бұрын

🙌🏼🙌🏼

Enjoyed that tear down. Glad Niki showed the issue on camera.

Fascinating video. Obviously it's sad that the S3 engine ate itself, but thank you for posting the video of the strip down, it's absolutely riveting seeing each stage of the disassembly and seeing what went wrong. It's like an investigation.

First absolutely munted a m5 clutch and then detonated a s3 motor! Hamz doing it in style 🤣 loving the vids mate! Been an every episode watcher since before the grey mk5 and you never stop entering! Cant wait for the next one!

Great to see R-Tech back on the channel, love their work. Can't wait to see where you take this. Thank god I installed the VIS balance shaft delete on my car, adds quite a bit more vibration, but I'm happy to live with it considering what's happened to yours💥💨

Impressive how quickly he dismantled that. So just half hours labour so far then 😁

@walther89

2 жыл бұрын

there is nothing that blocks the way, also so small engine that easy to work on :p

That S3 deserves to be fixed more then the one you have. No lie.

So glad I got R-Tech to do a VIS balance shaft delete cog on my Mk5 GTi. Glad you've got another engine sorted for the S3. Liking the TFSI content on the chanel again. 👌👍

Miss the old school videos like this keep it going 👍

Hamza just buy that whole S3 and use the bodyparts from yours to make it nice again, in the end of the day you have an original 83K mile S3 which is probably tidier underneath too

Same happened to my mates mk5 GTi; oil pump sprocket bolt sheared, chain snapped, engine rebuild £2500

Just don't how this guy gets an appointment at RTech so quick They got man waiting for months just for a remap 🤣🤣

@Zenithh

2 жыл бұрын

Fancy seeing you here

@N1NJAKIDD

2 жыл бұрын

Might be the Pitstop garage which just concentrates on car repairs and servicing

@piovo5222

2 жыл бұрын

@@N1NJAKIDD nah defo not, it’s just he’s a KZreadr and has brought them a lot of work in the past.

@N1NJAKIDD

2 жыл бұрын

@@piovo5222 fair play, it's a nice bit of free advertising, works out for all

@hamayunfarooq3278

2 жыл бұрын

Their pitstop garage gets cars in and out quick

R TECH BOYS ARE BACK!!!!

Balance shaft deletes are a must on these engines, a cheap preventative measure.

@Max34557

Жыл бұрын

I have the same engine and am thinking about installing a VIS freewheel, but doesn’t disabling the balance shafts introduce more vibrations?

@nabeelahmed2750

Жыл бұрын

@@Max34557 i never experienced any vibrations on 2 cars i had this done to however some people do get them, mainly due to old engine mounts, if you did get vibrations new engine mounts would reduce what you would feel.

Great to see you back at R tech

I remember buying an 06 Golf GTI and it blew up (oil pump failure + blocked syphon) within half an hour of buying it 😂🤷‍♂️ I just stuck with subaru after that, rather break down in a WRX 🤷‍♂️

@71pil

2 жыл бұрын

Japanese so much better all day long..

Loving the workrate Hamza. Nice way to end my weekend watching your vids. Keep up the great content please as the more content the better. I will sign up to your patreon if this continues!

Oh so a blown engine on this car, and a blown clutch on the other car, damn, but yet you keep a smile on your face thats why i love you bro 😎, keep up the good work bro

Rtech is back!!!!! yeah baby!!!

First 2 steps if you buy TFSI EA 113! Install 2.0L TFSI EA113 roller tappet conversion kit for high pressure pump! And install a vis motorsport balance shaft delete!

Being an 8P BWA owner I'm here for all of this 👍🏽. TFSI life for life !!

This series of to a cracking start already💪💪

Buzzing for this build

Never get bored of any your content top geeza

Great tear down video, was good for Niki to give us a rundown👍🏼

I don't go anywhere other than R-tech they are top blokes. 💯

This is going to be a cool build, can’t wait for the next episode 👍👍

I love these vlogs makes it more interesting

Nikki is the man good to see him back on camera ..The remap king

Ayy this shape of the S3 you could get without out the S3 bage, you just buy high speced a3 2.0l T with a manual. Lots of surport from South Africa 🔥💥👌💪

great content mate R tech are the ones for the tfsi Niki mapped my tt mk2 a few years ago and I've done 20k on it with no problem's

Liking the video before i even watch it as i already know it’s a banger

Miss the M5 what a beast that is bro insane sick whip mashala please turbo it or supercharge 😍

Great content love the way you just shrug it off and move on !

Really enjoying the videos 💪

Keep em coming

‘Engine’s gonna be a coffee table’. Nice 😂

Fully killed that engine bro good watch the teardown straight to the point

Gower Power is back!!!

Good video Hamza 👍🏻

Brilliant video and the mechanic funny as 😂

MK5 GTI owner here my oil light comes on daily 😄 I've just ordered another oil pump after watching this video

Get the steering wheel as well. The old one is horrible lol. I used to have a CDL S3 and I was always scared what I would have to pay for on that 😂

Hamza it's time to rename the channel to include 'salvage' in the branding bro lololol. Jokes aside, great teardown, I actually really enjoy this content and love seeing the cars back on the road at the end of it.. keep the faith bro lmao

Wicked video! Unfortunate but it is what it is.

New video! Today is a good day!

I had an 07 8p s3, with a BWA motor swapped in. Crazy fun but you gotta buy them expecting the worst and hoping for the best

@georgel.4836

2 жыл бұрын

Isn't BWA 2.0 A3/TT? BHZ is the S3 motor old gen and CDL facelift same as tts afaik

Worst I have seen for a long time. Smashing job :)

@TRHamza

2 жыл бұрын

Always nice to get that accolade 😂

@stichupman

2 жыл бұрын

@@TRHamza you know what they say if you are going to do something do it properly. You certainly did that Haha.

Poor s3, I have a 09 s3 sports back and I love it , your videos are giving me the fear,

@phantombigballs8165

2 жыл бұрын

Get that cog done ASAP

Nik is an absolute master with the 1.8t, tsfi , I had a very bad experience with a anther tuner who pretty much wrecked my golf and he found the issue in about 30 min and didn't even want any money from me , just asked me to get the map removed and to get him to tune it instead.. and he was cheaper. Don't live in UK anymore but if I did and had one of these engine I wouldn't take it anywhere else

If you need a engine, I’ve got a forged CDL there, only done 4k miles since rebuild, balance shaft delete sprocket installed, wossner pistons, pec rods etc etc 👍

Niki is the man, Gower for power 👊🏻

This mechanic is certified

There's no messing about on Tr hamza channel go on lad 👍🏼

@TRHamza

2 жыл бұрын

👊🏼👊🏼

@twes5563

2 жыл бұрын

@@TRHamza come on brother 👌🏽

yes hamz

It’s a good thing like I said in a comment in the “blow up” video. More content now broooo 😅😎

10 things to quit for all Strong Men: 1. Caring about what others think 2. Not believing in yourself 3. Not experimenting different ideas / solutions for problems (life&business) 4. Not prioritizing your health 5. Wasting your precious time 6. Wanting something (instead write a plan and work towards it) 7. Chasing meaningless relationships 8. Wasting or draining your energy from beating your meat 🥩 9. Wasting time by scrolling social media 10. Nailbiting/nailpicking habit for good (if you do it - consider stopping it as it makes you mentally weak + affects your confidence and all other areas of your life!) Take it easy and I hope you found one thing helpful in this list..........................

Great to back on VAG content. Got the Perfect Plate for you to enjoy the TFSI Life once again. Let me know.

Im a simple man, I see hamza I click

Been a while since I have been over to R-tech 😉

@N1NJAKIDD

2 жыл бұрын

Get yourself down there mate, time for a stage 2+ don't ya think💨💨

When you did an rs3 video I loved it. Hopefully u do it again

@TRHamza

2 жыл бұрын

RS3 content will be back soon 👍🏼

@haidercars7461

2 жыл бұрын

@@TRHamza Thats good news 👍

my whip black s3 jxd plate😂🔥

Big fan looking forward to meet you one day.

Thx Sir🤜🏻🤛🏻❤

Out of all that carnage on the floor, I think the battery is probably the only keeper 🤣

Good old tsfi life hey 👍

Spitting chips, metal chips lol definitely grab that S3 clean interior and flat bottom

I liked this video 👍👌

do a fully built s3 should be able to push 450-500hp would make a sick vid

Really interested in seeing more videos on this car, bought one last year. Let me know if you break it for parts bro 👀

Vrs Northampton get a good low mileage engine used them a few time's really good for engine and gearbox body panel's

I feel your pain.......two cars out of action, with potentially expensive bills ahead to put them right. However , I know you'll overcome these challenges & provide us with some interesting content along the way. By the way, does gge 1.0 L TFSI engine have similar problems to your S3 unit?

hey mate its wayne from beeches who picked the s3 up from ya house ...... thought i recognised the reg when i saw the vid

In the last video didn't you say while you did the pick up you should have done the balance shaft delete dude....... Either way sounds like it was going to be one thing after another with the motor dude. That breaking s3 may be a good idea to get some of the less crusty bits to replace the really crusty bits on yours hamza. Big respect to nikki Ben and the boys they are the dons in the 113 world. 🤙

need an update on the 130i!!!!

Best vids

Oil pump ran by a hex key that rounds off?

i was told u had to get to main botls to view crank shaft and remove the upper oil pan do i not need to?

"Is that salvageable?" _"No."_ Yeah, you never want to hear that. Just wondering how much a re-built engine would be.

Let’s goo 👍

Fit the 1.8t oil pump much better bartek does a video on modifying block to take it

So does anybody know how this has happened? Lack of maintenance by previous owner?

Why does it need the balance shaft in the first place other than to balance the engine if you say it isn’t needed?

If the engine can be used as in if the engine block is not destroyed an engine stroker kit would be beneficial

So was it the non gen chain tensioner failure please mate?

Absolute carnage explode catastrophically lol

The donor car looks better apart from front end and category.

How close a shave then did the last owner have before you bought it....talk about you being unlucky.

Whoa I have the facelift version of this with 140k miles on it This is scary to see man

@N1NJAKIDD

2 жыл бұрын

Get a VIS balance shaft delete freewheel fitted ASAP for peace of mind buddy

@yannickbergy8030

2 жыл бұрын

No probleme to engine facelift Its like golf 6 r

@scap11

2 жыл бұрын

@@yannickbergy8030 not an issue on the facelifts? 2011 8p?

@N1NJAKIDD

2 жыл бұрын

@@scap11 same issue exists on the 2011 S3, which has a CDL engine

You gonna find second hand engine for it 👍

great strip down video....carnage😭

What are common failure points on a 2.0 TFSI engine? Looking to buy a 08 Jetta Mk5 with the engine...

@redauwg911

2 жыл бұрын

that's the worst Jetta made

@Wayfarer9000

2 жыл бұрын

well i am no expert but as far as i know balance shaft oil pump (there are delete kits) cam follower (replace it for a new one) and chain tensioner replace it for a new one) and maybe there is more but i don't know

Salute R tech. If you want a pro job go to them.

Some bling 😂

Where can i find the oil pickup pipe, im from The Netherlands and i cant find it anywhere here, i have a Golf 5 GTI EDITION 30 2008, and i want to change the oil pickup pipe ASAP, if someone could send me a link for the part i would appreciate it.

@TRHamza

Жыл бұрын

It should be readily available from the dealership 👍🏼 part no - 06F115251A

@TarikED30

Жыл бұрын

@@TRHamza Thank you so much Hamza, BIG LOVE

Why does you blowing up a Tfsi make me want to buy another Tfsi 😅😂

@TRHamza

2 жыл бұрын

Get one bought bro you know you miss it 🤣

How much work would it be to drop the 2.5 rs3 lump from the 8P into this 🤣

@user-cn8tc2lr1c

2 жыл бұрын

Completely different platform wouldn’t be worth it also

See if u can pick up a seat leon cupra and get tht all done up

Put a 5 pot in it