No video
Hoverboard Firmware Hack
New E-Traktor build with Hoverboard Motors - Part 2
Second Kid also wants an E-Traktor / E-Quad.
Check out out 1st Build: • Selfmade Quad I made o...
Many thanks to this project:
github.com/EFe...
Music by Peyruis : / peyruismusic
#Hoverboard
#Hack
#dissasemble
#ekart
#STM32
Пікірлер: 19
Hallo @JoLi, hab in deiner Kanalinfo gelesen das du aus Österreich kommst, so wie Ich und mein Kollege mit welchem ich dank deiner Videos uns an das Projekt getraut haben. Bobbycar Hardware ist alles erledigt, haben auch schon das Mainboard geflasht, allerdings finden wir auch nicht im Wiki von Github die richtige hex Datei die es uns erlaubt das Bobbycar via Pott anzusteuern. Hast du es auch mit Überhaut mit einem Hexfile geflasht. LG aus Graz
@Joliull
Жыл бұрын
Hi, nein ich hab es selbst compiliert.
Hello! Is there any firmware to make the hoverboard more sensitive? I am building a diy onewheel with it so the total tilt space is smaller
@Joliull
11 ай бұрын
Check out the Links in the description. The firmware is open source.
If possible, a detailed explanation of programming the code from inside the computer
@Joliull
Жыл бұрын
Please check the linked Github Wiki.
What programmer did you use?
@Joliull
2 жыл бұрын
A STlink v2.
did the MCU unlock with st-link..... after i unlocked... i then read the line that stated. do not use 3.3v or ur board will be ded... checked the board. indeed it was dead :( sad.
@Joliull
Ай бұрын
Sorry to hear
Can you please explain in detail how to program the computer screen capture code
@Joliull
11 ай бұрын
Check out the link in the description. There is a very good documentation.
bonjour je cherche des information sur la carte mere YST-DXT J20 V5.7 et les petites carte YST-TLY-20 v3.6 YST-APP-J20 V2.1 merci
@bodinhocupu8689
Жыл бұрын
Moin, ich habe auch dieses Problem nachdem Flashing. Das Board piepst und konnte nicht richtig Gas geben. Wie hast du es denn kalibriert? Ich habe 2 Pedals angeschlossen. Danke im voraus.
@Joliull
Жыл бұрын
Kalibrieren funktioniert am besten wenn es am Boden steht.
Did you changed something in the code or did you only copyed it
@Joliull
2 жыл бұрын
I changed the mode and parameters in the config.h. Check out the Github wiki, it has good documentation.
Video terrible not even a actual screenshot what your doing. You might as well put the camera further back instead
@Joliull
Ай бұрын
Thanks for your suggestion.