This may be the best “How-To” video i’ve ever watched 🙌🏿

I pastor a church in V.A. ....this man has been great help to me ....he does a great job explaining the HOW TO !! THANKS KEEP UP THE GREAT WORK !!

Thanks for sharing...this is very generous of you. Good job.

You have impacted the structural integrity of the truss by drilling in to it. As a event technician if I ever seen this I would condemn the truss as its not designed to be drilled through.

Thank you so much

thanks a lot! That "GLUE IT" is very undervalued lol

Amazing job, great tutorial! What type of fog machine or hazer is being used to see the beams on the movers?

Great videos!! Just curious if the cord from the decoder has to go into the dimmer box first or straight to the board/computer program?

Hey! Thanks for this insight! It's helped me develop a plan for an install concept for a small and growing ministry. I was able to get almost all the way to the end of the project. The issue I'm running into, though, is that when operating standalone mode all colors work, all strips work, and even the macros built in to the decoder works perfectly. When using DMX signal, control is still present, however, it flashes and strobes as if there is an intermittent issue. I'm using 8 channels in 4ch mode, no terminator, and 8bit. Do you have any suggestions?

Love the videos! About to do this at my church! This is weirdly specific but at 12:06 you are crimping/clamping the wires together. What is this called and is this what I would want to use if I wanted to connect this to a long cable run? Also, do you feel the need for diffusers on your lights? Mine will be about 20-25 feet from congregation. Wondering if it’s worth the extra $70 for a 10 pack. Thank you so much!!!

Hey man that’s a sweet set up how many DMX decoders did you use? I’m assuming with 16 Led strips you would use two of the decoders and 2 of the power supplies?

Can you review your church lighting

It looks great with the lights low. Can you show a photo of what it looks like during the teaching.

@WorshipLeaderHangout

4 жыл бұрын

I’ll post a pic on Instagram tomorrow.

@enuanwatheodora1891

3 жыл бұрын

@@WorshipLeaderHangout thanks thanks n thanks for so much inspiration

Hey I think I saw your new design on fb

Can you create a video going more in depth about the function and purpose behind a lot of mechanics, including the decoder, board, and software? Please and thank you.

@WorshipLeaderHangout

4 жыл бұрын

Working on one for that exact thing. Thanks so much for watching this one.

@calebvazquez3396

4 жыл бұрын

@@WorshipLeaderHangout Did you guys take down the video that went more in depth with the software, decoder, and board??? I can't find it anymore!

@WorshipLeaderHangout

4 жыл бұрын

@@calebvazquez3396 Yeah man I did make it and realized I made a simple but important wiring mistake. I don't want to be misleading and confuse people so I pulled it until I re-shoot that section. It will be back up soon. Shoot me a DM on Instagram if you have any questions about the wiring.

@calebvazquez3396

4 жыл бұрын

@@WorshipLeaderHangout Ok cool. Just wanted to make sure I wasn't going crazy. I will be looking forward to your video! 👍🏻

@WorshipLeaderHangout

4 жыл бұрын

kzread.info/dash/bejne/ZWp-t7CEmbXQgps.html

Hello....what's the name of this software that you used in designing the stage ???? And can you give further tutorials on how to use the softwares

Love this design!!! We are planning on doing it in a few weeks. Question.... How many rolls of LED tape did you buy? If I'm mistaken I counted 18 different strips, does that mean 18 different rolls of tape?

@WorshipLeaderHangout

3 жыл бұрын

Nice man that exciting. Send me a photo or two on Instagram when you get done. I probably used 16 strips. With the center section being 4’ and 5’ I can use one strip for two.

can you please do video about hazers which are good affordable hazers? my church is small and we have some people asthma has a hazer an effect on people with asthma or allergy? does the hazer needs to work the whole service or just an our before ?

@WorshipLeaderHangout

4 жыл бұрын

This is a good idea. We use a water based haze fluid and only run the hazer 10 min prior to the service and turn it off at the start of the sermon.

If u add some muzata led diffusion channels, it would look top knotch 😉

@WorshipLeaderHangout

10 ай бұрын

I wish I had back then. Future projects for sure.

I like your video's!! Can you give some good software for stage design? Or which one do you recommend? 💪

@WorshipLeaderHangout

4 жыл бұрын

Thank you! So like I said in this video I used keynote this time around 😬. Surprisingly it worked very well making the shapes but there is no way to design on scale. However, I typically hand draw ideas and eventually decide on exact measurements later in the process. As far as software, I’ve only used keynote and photoshop for stage design. But like I said, I rely more on my brain and old fashion pencil and paper. Hope that helps.

@xanderglavas

4 жыл бұрын

@@WorshipLeaderHangout Thank you! It helps me a lot! 🙏

Are there any other DMX-Decoder for these LED-Stripes? Because Amazon won't deliver them to Switzerland.

I want to learn do you have course or step by step guide

Hello- do you have a picture of this showing it without this video?. I'd like to to send to my team as we are trying to change our stage design. Thank you

I’m struggling in the video was just one led tape but if you use 8 leds how do you address every single led ? Or do you have just one Adresse for all leds?

@egg6649

3 жыл бұрын

This is non addressable tape, the 8 channel sets just means whatever leds are connected to each channel set will all be controlled the same. Addressable led strips are only 3 pin, 5v, gnd, and data, while these are 5 pin (12v, r, g, b, w)

We need to chat dude. We're in the middle of a sanctuary remodel and working through some lighting ideas. And I'm definitely limited on my knowledge here.

@WorshipLeaderHangout

4 жыл бұрын

Call me anytime!

Can we see all of your lighting setup

@WorshipLeaderHangout

4 жыл бұрын

I like this idea

What wire do you use for your long runs?

@egg6649

3 жыл бұрын

Not sure what they’re using, but we’ve found that cat4/5/6 Ethernet cabling is great as it is perfectly colour coded, and even has the extra white wire if you have a white channel on the leds. (We just cut off the extra white wires)

Hello, how can I send you a photo of my church and see if you can recommend a design? trasucido por google

@WorshipLeaderHangout

4 жыл бұрын

Feel free to send me a DM through Instagram

Hey bud ! how do I connect the power supply? Am I suppose to connect it to both inputs?

@WorshipLeaderHangout

4 жыл бұрын

Yes. One power supply will power both sides. (Both inputs)

@modellking

4 жыл бұрын

make sure the wires are thick enough for this though... and there is an upper limit for the distance the cables can go. Try keep the voltage as high as possible as long as possible. (The higher the ampere the thicker the cable and the more the voltage drops over distance. this drop is more significant at lower voltages.) Do not mess with high power / high voltage systems if you are unsure about what you are doing and ask an electrician if in doubt! You don't want a kid dead or a literal fire in your church!

What did you use for lighting the Hourglass Panels

@WorshipLeaderHangout

3 жыл бұрын

LED pars shooting from top and bottom. Slim pars

Where is u church?

I need your assistance to design a background for my church. Can you help me with ideas? It's the first time we are going to do this..

@WorshipLeaderHangout

4 жыл бұрын

Hi Ryan, send me an email through our website worshipleaderhangout.com. We can set something up from there. Thanks so much.

@ryanhuckumchand7590

4 жыл бұрын

@@WorshipLeaderHangout thank you very much..

How many meters of LEDs did you use?

@egg6649

3 жыл бұрын

This design is just over 40 meters, or 132 ft.

Hey dude what LED light the hour glass? Thank you

@egg6649

3 жыл бұрын

He said he used a par on the top and bottom, not sure what, but anything would work.

@egg6649

3 жыл бұрын

12:30 looks like an American DJ Hex Par.

@15741tassle

3 жыл бұрын

Thanks

@egg6649

3 жыл бұрын

No Problem, if you have any questions feel free at ask.

What power supply do you use for the dmx decoder?

@WorshipLeaderHangout

4 жыл бұрын

This is it. amzn.to/2WLdq6B thanks for the reminder.

@willsummerville5086

4 жыл бұрын

Thanks man! Whenever corona fades out come give a visit to LifePoint Church in Clarksville TN. We’d love to show you around!

@WorshipLeaderHangout

4 жыл бұрын

Thanks so much. Let’s do this

@willsummerville5086

4 жыл бұрын

Sweet! Email is will@lifepointchurch.tv - shoot me an email and let me know, my friend!

Can you send me the file of your stage drawing? I know you did it in keynote.

@WorshipLeaderHangout

3 жыл бұрын

Contact us over on worshipleaderhangout.com and we will get it sent to you.

sooo, drilling through the truss and hanging it with thread rod would be the hardest way to accomplish that, they make things for truss (and/or attachments that fit the trusses diameter) exactly to hang this way without drilling through it, much easier than drilling it.....anyways, your setup looks awesome, very creative!

@WorshipLeaderHangout

Жыл бұрын

Thanks Justin. This was another rigger and that’s how they did it at the time. Not sure how they do installs now. But thanks for the info. I’ll look into it for future projects

@Reazintful

Жыл бұрын

@@WorshipLeaderHangout np, not that big a deal, it got hung, just mentioning there are easier ways.

looks awesome but one thing you might want to rethink is the drilling through truss and hanging in the way you have - huge liability issue

@prestonproductions6210

3 жыл бұрын

you could have just done eye bolts off the unistrut to chain or aircraft cable to a half coupler with an eyebolt on the truss - once you drill through that truss its worthless and the pre engineered rating is moot - unless you had an engineer sign off on this I would seriously rethink the rigging - again the lighting looks awesome though.

Oh this is beautiful... Your email sir

Cringing on the drilled truss

Why didn’t you paint the wood *before* putting it wall together, and then just touch up any scrapes, would have been much easier.

FILO anyone?

Truthfully if you wanted to do threaded Rod for hanging lighting you could have used unistrut as it’s made for suspension and interfacing with rod. What structure did you connect the threaded rod to? What was the connection method? I cannot stress this enough because I see a lot of people who are inspired by this design… please don’t EVER hang truss this way… this is a serious thing whenever hanging lighting or audio equipment in the air. I’m not trying to be hyper critical, it’s really just unsafe and very not correct. 😳😳

Please let me know if you're looking for a husband

Oh no!!! You should not EVER drill intro truss to hang! There are so many legitimate ways to hang lighting truss and drilling is not one! Threaded rod is fine but the connection to the truss is not good. This voids any real rating of the truss. Chain and spansets would be the correct way to go!

@WorshipLeaderHangout

Жыл бұрын

Thank you! This was done by an “established AVL company” several years ago the same week that I installed this design and was addressed with them not to long after after someone else said basically what you did.

@jessecoonen7881

Жыл бұрын

@@WorshipLeaderHangout that AVL company owes you some new truss then! 😬