Great very handy to see what you need to know demonstrated. Thank you!

Thank you so much! i had this for a year and couldnt figure out why it wasnt drying my clothes i asked people what settings they would use on there machines, and since this is the first time i have owned one i thought it was 8kg on all settings turns out its just on 1

epic video, amazing presentation

@lords-electrical

2 жыл бұрын

Glad you liked it!

Thank you, very helpful

Brilliant review do you have any haier washers in your showroom or any Lgs or more insides does this model have a self cleaning condenser

Brilliant video but I don’t suppose u could do an overview video on the Indesit I3D81WUK 8KG Condenser Tumble Dryer because I’ve ordered it but never seen it in person thanks 😊

Hi. I have just bought this exact dryer and have a question. I have dried two loads of laundry in it so far and already the condenser cleaning red light has come on as has the filter red light. The filter is spotless and the condenser just can not possibly need cleaning yet. It does go off when I start a new cycle. Is this normal? Are the sensors overly sensitive? Thanks :)

Great review. Thanks

@lords-electrical

8 ай бұрын

No problem, glad it was useful for you.

Hi mate, do you have a matching washing machine for it? My kitchen is Anthracite grey and need a similar coloured appliances as i don't want an integrated machine and dryer. Thanks for the helpful videos.

Great review. Thank you

@lords-electrical

3 ай бұрын

Glad to know it was helpful for you, thanks for the feedback 👍

Great explanation and helpful demo! Received this model today and puzzled by a rubber strip at the bottom lip of the front of the dryer. It was held on by tape but not sure if it is protective packing or part of the dryer. The rubber runs the width of the machine. Welcome your thoughts as installation sheet makes no mention. Thanks again Neil

@lords-electrical

2 жыл бұрын

I must admit it is odd that it is on the dryer, we have been recommended by Hotpoint to keep it on but i cannot really see what the advantage of it is.

@neilmasters9914

2 жыл бұрын

@@lords-electrical thank you that is helpful, likewise I can’t see a purpose.

@michaelhastie9729

Жыл бұрын

I had the same, I just didn't know why it was there, so I just left it.

@michaelhastie9729

Жыл бұрын

@@lords-electrical Thank goodness other people have this problem, now I will just leave it. Thank you all for your input.

@winchester8046

7 ай бұрын

The rubber strip is for if you put it on top of the washing machine it will stop thing going in the gap

I'm having an issue. The red condenser cleaning light came on today so I totally cleaned out the condenser, the condenser itself and inside and around the area and left zero fluff. The dryer refuses to start now and still getting the red condenser cleaning light. Any help guys? Would appreciate it. Have 3 loads to dry

It would be great if the kg was written on the dial so you’d know right away the max weight for each one

how do you change the heat setting to low?

Thinking about buying one of these machine for an elderly parent, how often would you recommend the tank can be emptied, i think waiting til it's full could be a little heavier than we'd like for her

@lords-electrical

Жыл бұрын

On the whole, you would normally empty it every 3-4 loads, but as you say it can get heavy. I know of customers that empty the water and clean the filter after each load, this way it is done each time and the container is a lot lighter than if you leave it until it is full.

Hi, I have the same tumble dryer it is showing err code. I don't know what is that symbol mean could you please help me with that. Water 💧 sign in small box. Thanks Chaudhry

Hi great video thank you I have just received this model, instructions are poor especially re the drainage installation pipe, which pipe is it black or clear that would go into the waste drainage pipe and how do you extend it as it looks very short? Thank you

@lords-electrical

Жыл бұрын

I've just had a look at the instructions and it looks like it is the black one to go into the waste outlet. i don't think you will be able to extend the pipe, if you need it longer it would be a case of finding a piece of piping in one run

Hi. Thank you for this video. I have just bought a H3D91 and have used it successfully for a few washes but now have A red square warning light with 3 red lines inside. What does this mean?

@lords-electrical

Жыл бұрын

This normally means the condenser unit will need cleaning at the bottom of the dryer

@margaretdavis624

Жыл бұрын

@@lords-electrical Thank you. I managed to clear it but not sure how. Working fine now. X

@brianharrison3676

Жыл бұрын

​@@margaretdavis624 Hi. This flashed up on mine tonight so I took out the condenser, totally cleaned it and around it and inside the unit but I am still getting the red box and can't start the load. Did it take a while for yours to reset? Thanks. Bri

Hi mate, I bought this same dryer only last week but when I turned it on for the first time it had the loudest noise almost like a tractor engine, had to turn it off straight away. I thought it may be that silver foil on the back that needs removing as thought it might be covering up the air vent but looking at your video its kept on? is that correct? Have you heard of this before as the noise is unbelievably loud

@lords-electrical

2 жыл бұрын

You shouldn't need to take the silver foil off the back. The loud noise doesn't sound normal. If it is like that straight from new the I would get in contact with the retailer for them to have a look at it.

Great video and review. We have just purchased this model but it is making a loud thudding noise. Do you have any idea what might be causing it? We’ve tried and checked everything. Literally unboxed it for first use and it is vibrating through the whole house. Any advice welcome

@lords-electrical

2 жыл бұрын

Does sound odd that it is making this noise. If you have only just unboxed it and it's making this sound then i would contact the retailer you purchased it from as it sounds faulty.

@wally6200

2 жыл бұрын

Lazyjoe1000, I bought this machine today and it is making the thudding noise like yours. How did you solve it

@lazyjoe1000

2 жыл бұрын

@@wally6200 you have to get in touch with hotpoint directly so that you can book an engineer to have a look at it only then can they authorise an exchange from whom ever you got it from. It is a great machine when it’s working properly so don’t give up on it.

Can u tell me what I should use for low heat setting please

@lords-electrical

5 ай бұрын

If you are looking for a program for low temperatures then i would use the silk or woollen programs

Thankyou for the run down on this tumble dryer , i thought i would need a degree to work it lol. However it doesnt seem to be heating up. Its the first time use😳, before i get it took baack do you know of any simple reson why first?😮 x

@lords-electrical

Жыл бұрын

It should just get warm, there isn't anything special about the drying function on this model so it should start to get warm in a short space of time. Don't forget that because it has a sensor, then the first couple of minutes may not be heating, but if after 10 - 15 minutes it doesn't appear to be warming then i would contact the retailer to get them to sort it for you.

Bought one of these and lived for 3 years at hes place...used max 3 times and it never gets hot since the day I got it...3 one from argos...and this was there last replacement...took it to bits looking for reset button!!! Can anyone help me.

How do I get dryer out of demo mode it says demo in corner and I can’t use it

Does this dryer have a reverse tumble for duvet covers , dryers that roll them into tight ball are a pain 😢

@lords-electrical

Жыл бұрын

Yes this has reverse tumble.

I’ve unpacked the dryer but on the underneath underneath the front edge there’s a rubber strip about 1” wide that is partly fixed at each end and hangs down in the middle. Should this be removed?

@lords-electrical

Жыл бұрын

No, just leave it in place. I will be honest i am not sure what purpose it serves but it is just designed to be left there.

@jeracom

7 ай бұрын

The rubber strip on the bottom is just to stop dust going under the dryer. I just left mine on

How do you take it off demo mode

Hello. Does this tumble dryer give a decent amount of heat? To dry the clothes or it is a cool dryer? Thanks x

@lords-electrical

Жыл бұрын

Yes it will dry the clothes properly and get hot.

Iv only had my exact tumble dryer in this video only had it 5 weeks barely used yet and now it’s drying out cold air??? How can I rectify this?!

@lords-electrical

2 жыл бұрын

Does sound a bit odd, if you have tried different programmes and only drying in cold air then there may be a fault with it.

Is there a time delay on opening the door mid ceycle by pressing pause button mine just got it does not want to open?

@lords-electrical

Жыл бұрын

Normally it will only be seconds. But unless you really have to it's not recommended to open the door mid cycle if you can help it.

I just bought the same Model: H3D91WB UK which was delivered yesterday (15th Sep) and I was surprised to see you had the same model on your video. I wish all companies created videos such as yours to put on KZread for customers, as it would make it easier to either learn how to use, or even assemble their products, as some manuals are a bit awkward to follow. Anyway, I digress, I really loved your video, but there is one thing I didn’t get. On the video I see the numbers 2:20 on the screen, is that 2hr 20 min? I would think we would only need 30 minutes to dry anything. How do we set the timer for 30 minutes. I will look back later to see if you have answered my problem. Once again, great video.

@lords-electrical

Жыл бұрын

It will normally come up with a time like 2 Hours 20 Mins but as it uses sensor dry then it will change the time depending on the dampness of the clothes, load size etc..

@michaelhastie9729

Жыл бұрын

@@lords-electrical Thank you for your help. I used my machine for the first time on Sunday and everything went okay. I think I will keep using it on "Eco Cotton". I see what you mean that the machine changes the time setting to when the clothes are dry. Once again thank you for you reply.

@brianharrison3676

Жыл бұрын

Hey, I just bought this model today and hoping it works well. Thanks for your very informative video. I do have one question. What does pressing the rapid button do? So say I am using bed and bath and press rapid, does it increase the temperature/tumbles to make the drying faster?

Does this have a pump on the condenser? I want to use a drainage kit on this to go into a sink or trap? Thanks

@lords-electrical

Жыл бұрын

You can remove part of the pipe at the back and put it into a drain outlet if you would prefer.

👍👍👍

Hi my tumble dryer isn’t heating up, do you know where the reset button is? Is it on the back of the tumble dryer? Thanks

@lords-electrical

4 ай бұрын

Only some dryers have a rest button on the back, not many now though. If its Hotpoint its more likely to be a heating element issue.

Just bought a H3D91condenser tumble dryer and it is making a heartbeat sound as it is drying. A constant boom boom once every revolution it is only 5 weeks old. Is this normal please

@lords-electrical

4 ай бұрын

I haven't heard of that noise before? I would contact the retailer or Hotpoint to get it checked out to make sure it isn't faulty

@chrisspurway1086

4 ай бұрын

@@lords-electrical they said it would settle down in a few uses but still same

My Hotpoint Aquarius condesor gets cleaned after every cycle but the two red lights on the sensor still appear that they need cleaning? I've tried unplugging the socket but no luck? Also what's the equivalent to Mixed Load on an Aquarius TCFS 93B GP setting? Thanks

@lords-electrical

2 жыл бұрын

Not sure if it would help, but it may be worth cleaning the sensor in the dryer. It is normally around the door on the inside, just give it a wipe over as it may help to solve the problem.

@RMetsy

2 жыл бұрын

@@lords-electrical I tried this to but unsure why both lights appear. Thanks for the reply

@911Locksmiths

2 жыл бұрын

Mine is doing the same. Only a month old

@RMetsy

2 жыл бұрын

@@911Locksmiths I still haven't solved it.

@jeracom

7 ай бұрын

This seems to be an issue with the red lights mine is a day old put 2 loads threw it and one red light came on I did think it was way to soon for a clean but took the condenser filter out it was spotless but cleaned it anyway and cleared the fluff filter out and it was practically clean. Light is now off but that's not normal. Possible sensor issues I think. A bit annoying considering it's brand new

I brought this dryer 4 months agi now, and it is making a grinding noise when on, any tips?

@lords-electrical

Жыл бұрын

It is normally the bearings when there is a grinding noise. I would contact the manufacturer to get them to have a look at it

Hi received this tumble dryer a few months ago. Its not heating up any idea whats wrong with it. Thank you.

@kimblair6186

Жыл бұрын

Did you ever find put what was wrong or was it faulty, I just got one yesterday and I have same problem 🤔

@elizabethcrawford1881

Жыл бұрын

@@kimblair6186 hi it was faulty had to have a new heat element put in. Seems ok now.

This is my dryer it keeps saying water tank needs emptying and it doesn’t it’s only 1 year old but keeps buzzing every 2 minutes and switching off can you please tell me what the problem could be thanks

@lords-electrical

16 күн бұрын

The only time we have had this is when the drawer is not pushed in properly at the top, or one of the pipes connecting the drawer on the back of the machine has become disconnected.

Hotpoint NM111064WCAUKN 10Kg Washing Machine. Is stuck on demo mode. Can you help witt this please

I've just watched your video and clicked on the half sun for low heat but it just flashes then goes off

Whats the drawer on the left hand side for

@lords-electrical

2 жыл бұрын

It is where the water collects from the drying process

How can you turn off demo mode

How do u adjust feet so it does wobble Please

@lords-electrical

2 жыл бұрын

The feet on the front should unscrew so you should be able to level the machine

hi i have had this dryer a few months, always empty water & clean filter after use but now it keeps switching off & a red warning light has come on so cleaned bottom filter also,turned on & it switched off again & red light came back on. could you explain the red light please as no info for this can be found....thank you

@brianharrison3676

Жыл бұрын

Hey. Did you get this sorted? Having the same issue.

@LR-tk2mt

10 ай бұрын

Same problem, did u get it sorted. Thanjs

@jeracom

7 ай бұрын

I've same problem 1 day old machine but my light is off now fingers crossed

Does this dryer have transit bolts?

@lords-electrical

Жыл бұрын

No it hasn't on the whole tumble dryers don't have transit bolts

My drier is not heating up

@lords-electrical

9 ай бұрын

More than likely heating element is faulty if the drum is rotating but the dryer is not heating up.

Thank you

What is delicate mode on this dryer?

@lords-electrical

21 күн бұрын

I would use the Silk or Wool program on this machine if you have delicates to get dry

Hi, I have the 8kg model brand new and it makes a thumping noise when running, is that normal?

@lords-electrical

2 жыл бұрын

not normally, i should be pretty quiet when in operation.

@thebigtunaboy

2 жыл бұрын

Thanks, just checked it again after running 20 mins sounds a tad like a scrape too, are there any transport bolts to remove, I couldn’t see anything mentioned in the unpacking instructions, thanks for the quick reply BTW, I just emailed the supplier

@diveguernsey6521

2 жыл бұрын

@@thebigtunaboy Similar with a new 8kg model. Did you get any info please?

@thebigtunaboy

2 жыл бұрын

@dave Yes I emailed them and they sent a replacement right away, picked up the first one and delivered another new one. First one was defo faulty, replacement did not have thumping noise, no questions asked, excellent service from Hughes

@Pacostour

Жыл бұрын

I bought this 5 days ago and is making big noise like crushing metal something like that is that normal I called the shop yesterday and they said is normal and I keeping using like that. 5 minutes ago from this post I got the error message F1 E2. I think is not normal.

Great, thorough review. I've wondered how you gained such a vast knowledge of household appliances? Did you attend a course or is it just what you've picked up? Thanks

@lords-electrical

2 жыл бұрын

I have gained knowledge as i work with them selling them and have done for about 20 years. It is amazing how things have changed over the years, not always for the better though. Thanks for the feedback

@MrCliveado

2 жыл бұрын

@@lords-electrical ah that's a pretty good video idea, when is newer not better? Thanks again for the informative and balanced content

@elvispolksalad

2 жыл бұрын

@@lords-electrical brilliant review do you have any haier washers

so is there anyone on here that uses the timed drying i want to use it over night.it doesn't offer a time on the display to set to. the fact he didn't demonstrate it makes me think it doesn't work!

Ive got this and its brand new. I tried 2 30 min cycles and clothes still wet. And not alot of water in can

@lords-electrical

8 ай бұрын

This sounds odd, but it may be better to pick a longer cycle and leave it to fully dry rather than selecting a manually timed program

@eatdahl

8 ай бұрын

@@lords-electrical its weird. Yesterday i selected cupboard dry and its a 2.14 cycle but after 1 hour it went down to 0.02 and then when it reached 0.01 it would go to 0.11 and did that about 5 times. I switchd off and tried again and then it was stuck on 2.10 for a while, 50 mins later it finished the cycle and all clothes were dry. And alot of water in the tank

how do you open the door on these dryers? i’m lost 😂

@lords-electrical

2 жыл бұрын

There is a handle on the right hand side of the door

@phillybeiiiii6619

2 жыл бұрын

got it now gotta press the lock 🔐 before opening the door otherwise i would of opened the door to begin with lol

My drying is still working but displaying two red symbols like fishing nets. The condenser is clean, filter is clean and water collector is empty. It's only a month old. I can't find anything in the literature that tells me what it's trying to tell me.

@brianharrison3676

Жыл бұрын

Hey, after just two loads being dried the same thing has popped up on mine. Did you find some sort of resolve?

@911Locksmiths

Жыл бұрын

@@brianharrison3676 I just cleaned it out and it eventually went away. They are good machines. The wife loves hers

@brianharrison3676

Жыл бұрын

@@911Locksmiths Thanks for replying. Yeah, it seems to dry very fast and properly. Will give them a clean again and see if that sorts it. Thanks 👍🏻

,I took the condenser out to clean now it won't go back in

@lords-electrical

7 ай бұрын

Sounds odd, just check to make sure the condenser is going in the correct way up and the blue tabs are in the correct position.

It beeps when trying to start but won’t start

@lords-electrical

6 ай бұрын

Just check the door is firmly shut. If it is slightly open then it won't start. Or also make sure the water container is empty, if it is full then it won't dry also.

Machine is tumbling for one minute then stops with a warning red water light coming on . Water tank is empty

@lords-electrical

Жыл бұрын

There may be a fault with one of the sensors, but I would first of all clean the sensor inside the door cavity to see that helps. If not it may be a case of getting someone to have a look at it for you.

New machine just delivered, does anyone else's machine make terrible grating sound? machine is level.

@lords-electrical

11 ай бұрын

It shouldn't be making a grating sound from brand new. Just check there is nothing in the drum but apart from that I would contact the retailer you purchased it from for them to have a look for you.

So as you skipped over it I guess you don't know how to set the timer?

Why is it so noisy

Beeps

@terryhumphreys7594

Жыл бұрын

Beeps and stops

Red light keeps coming on saying there's water in the pump brand new machine also new pump just been fitted red light still coming on

2hr 20mins to dry a standard load !!!!!😮 surely that’s just way too long

@lords-electrical

4 ай бұрын

It will be the initial setting, but with the sensor dry setting it will alter the time of the program to how dry the clothes you need them.