Hey rj, that's the very first version of our wishbone just to clear things up . Now they do come with a longer adjustment on the rear end side and also the spacers are now also pre cut already sized. 🤜🤛🍻
@RJTickler
4 жыл бұрын
alexhoppos909 after watching your video again I kind of figured it had to be an older version. Very nice product and with the help of your video it installed very easy.
You do the cleanest setups ever by the way Alex. Respect
@Christopher-et7bc
4 жыл бұрын
@@RJTickler you do damn good yourself brother
@enoboci27124 жыл бұрын
Gorgeous ‘64 and nice work, congratulations 👍
@trentarbeau87534 жыл бұрын
RJ, good to see another video of your work sir. And yes a lift would definitely be easier to work on rides to install juice or air products. But, obviously not needed after looking at your finished work. Keep up the great work and pushing out those videos sir. Be safe working under those rides.
@RJTickler
4 жыл бұрын
Trent Arbeau for sure man, I’ve had a car fall on me and pin me for a while. Was by myself and had no phone in my pocket. So after that I’m a little paranoid.
@Sonopbackup5 ай бұрын
I like your setup. Can you also do a light 3 wheel?
@Christopher-et7bc4 жыл бұрын
Black is hands down the best color for a 64 Chevy. It makes it look smaller and actually enhances it. But the body work has to be perfect lol.
@jeffavila87493 жыл бұрын
How long were the spacers after you cut them ?
@JoseJuarez-ns9cr2 жыл бұрын
Were you able to drive that with the rear low?
@BIGCHIEF3054 жыл бұрын
64 videos are the best videos
@barbarahernandez62644 жыл бұрын
For some reason i was expecting a higher lock up on that baby maybe some 16" cylenders in the back will give it a nicer lock up in the rear
@RJTickler
4 жыл бұрын
Barbara Hernandez yeah the rear cylinders aren’t very big on this one.
@tboneo2005
4 жыл бұрын
@@RJTickler I was thinking 16 on my cutty
@mokma-nator3839
3 жыл бұрын
I was thinking the same on their lock up, not very high for 12s
@christianglez46583 жыл бұрын
Nice car 🔥🔥🔥
@MrMonroe773 жыл бұрын
Nice 64 🔥🔥
@k_scamander_riddle4 жыл бұрын
Chulada nice car
@mrbeatty13able3 жыл бұрын
Great video. Where are you out of? (Located)
@cowboycandyvending15744 жыл бұрын
Cool.
@meefthepotatoe4363 Жыл бұрын
What’s That wishbone item for ?
@richardmcmillion26794 жыл бұрын
B.E.A.U.TIFUL
@lonestarlows4 жыл бұрын
Cool video. Any preference between wishbone and y bone? Y bone is bolt in...
@RJTickler
4 жыл бұрын
lonestar lows a lot of lowrider guys go with the wishbone as it allows to pivot point to be moved further down the frame. The y bone is awesome for a limited lock up set up and still allows a lot of articulation. I like the y bone myself.
@tjsheffield.56564 жыл бұрын
Been watching your channel for a while , learning alot from you , just wanted to know do you still own the bid shop anymore?
@RJTickler
4 жыл бұрын
TJ Sheffield. No. Check out the video I uploaded early yesterday. It’s a 2 year shop update.
@raymundohidalgo96184 жыл бұрын
Doesn't the car need to lock up higher to see the wishbone on the lock up
@kcbill5024 жыл бұрын
Did you have to install the bushings with some play or did you have cut them in order to have no gap in between?
@RJTickler
4 жыл бұрын
KC BILL you don’t want any play. The new version comes with pre cut spacers.
@cleo-wu4bo4 жыл бұрын
I would highly very highly suggest wrapping that frame, even a lay and play will warp the frame.
@RJTickler
4 жыл бұрын
cleo 2212 car has been done for 15 years. No frame issues. This one has a Canadian fully boxed frame front to back. Little stronger than the US built ones.
@gregorysalazar27613 жыл бұрын
Hey bro question if you have extended trailing arms do you have to adjust the length of the hoppos wishbone? I’m running into this issue now with the frame brackets being short almost 3 inches of touching.
@RJTickler
3 жыл бұрын
Depending on how long your trailing arms are the standard hoppos wishbone might not work.
@jeurisvinas54094 жыл бұрын
Nice xD
@miguelpena22854 жыл бұрын
👍🍻
@juanflores-rp5mk4 жыл бұрын
Yo R.j.....do i have to take out the axle to install a bridge?. Or would it be just a whole lot easier if I did???....
@RJTickler
4 жыл бұрын
juan flores yeah it’s just a lot easier. If you have the room to get the bridge in and weld it then go for it. Most of the time there just isn’t enough room.
@BeejayFinesse4 жыл бұрын
😩😍😍
@PavethaWay4 жыл бұрын
Are wishbones required on 12 cylinders?
@mokma-nator3839
3 жыл бұрын
I run a Y bone with 12s... they say wish bones are for 14s or longer
@davidcantu86073 жыл бұрын
Areu still in business where u located..are u in rock island Illinois?
@kobra_style
3 жыл бұрын
Hes in business still. Hes in Carlisle Iowa. If you need to reach him you can find him on Facebook look for Joe Thompson.
@user-ju2jx5dk1f6 ай бұрын
This 64 chevy impala are mine pop the glove box but if not mistake I can say that I'm sorry for my judgment but did you us a book call the sincere of hydraulics volume 1 if so can you order part 2 my pro is a install so rahfree brought me a kit in I need to install what's up address please I'll send you a box chevy
@joakimsundquist1732 ай бұрын
Yo you nead To flake your Roof ❤
@raymundohidalgo96184 жыл бұрын
You can barely see the wishbone
@RJTickler
4 жыл бұрын
raymudno hidalgo the point of the wishbone is to make your suspension better. Not see the wishbone.
Пікірлер: 54
Hey rj, that's the very first version of our wishbone just to clear things up . Now they do come with a longer adjustment on the rear end side and also the spacers are now also pre cut already sized. 🤜🤛🍻
@RJTickler
4 жыл бұрын
alexhoppos909 after watching your video again I kind of figured it had to be an older version. Very nice product and with the help of your video it installed very easy.
@alexhoppos909
4 жыл бұрын
@@RJTickler definitely bgppd job brotha stay safe , stay busy! Keep hustling!!
@tboneo2005
4 жыл бұрын
Yea I'ma need some
@Christopher-et7bc
4 жыл бұрын
You do the cleanest setups ever by the way Alex. Respect
@Christopher-et7bc
4 жыл бұрын
@@RJTickler you do damn good yourself brother
Gorgeous ‘64 and nice work, congratulations 👍
RJ, good to see another video of your work sir. And yes a lift would definitely be easier to work on rides to install juice or air products. But, obviously not needed after looking at your finished work. Keep up the great work and pushing out those videos sir. Be safe working under those rides.
@RJTickler
4 жыл бұрын
Trent Arbeau for sure man, I’ve had a car fall on me and pin me for a while. Was by myself and had no phone in my pocket. So after that I’m a little paranoid.
I like your setup. Can you also do a light 3 wheel?
Black is hands down the best color for a 64 Chevy. It makes it look smaller and actually enhances it. But the body work has to be perfect lol.
How long were the spacers after you cut them ?
Were you able to drive that with the rear low?
64 videos are the best videos
For some reason i was expecting a higher lock up on that baby maybe some 16" cylenders in the back will give it a nicer lock up in the rear
@RJTickler
4 жыл бұрын
Barbara Hernandez yeah the rear cylinders aren’t very big on this one.
@tboneo2005
4 жыл бұрын
@@RJTickler I was thinking 16 on my cutty
@mokma-nator3839
3 жыл бұрын
I was thinking the same on their lock up, not very high for 12s
Nice car 🔥🔥🔥
Nice 64 🔥🔥
Chulada nice car
Great video. Where are you out of? (Located)
Cool.
What’s That wishbone item for ?
B.E.A.U.TIFUL
Cool video. Any preference between wishbone and y bone? Y bone is bolt in...
@RJTickler
4 жыл бұрын
lonestar lows a lot of lowrider guys go with the wishbone as it allows to pivot point to be moved further down the frame. The y bone is awesome for a limited lock up set up and still allows a lot of articulation. I like the y bone myself.
Been watching your channel for a while , learning alot from you , just wanted to know do you still own the bid shop anymore?
@RJTickler
4 жыл бұрын
TJ Sheffield. No. Check out the video I uploaded early yesterday. It’s a 2 year shop update.
Doesn't the car need to lock up higher to see the wishbone on the lock up
Did you have to install the bushings with some play or did you have cut them in order to have no gap in between?
@RJTickler
4 жыл бұрын
KC BILL you don’t want any play. The new version comes with pre cut spacers.
I would highly very highly suggest wrapping that frame, even a lay and play will warp the frame.
@RJTickler
4 жыл бұрын
cleo 2212 car has been done for 15 years. No frame issues. This one has a Canadian fully boxed frame front to back. Little stronger than the US built ones.
Hey bro question if you have extended trailing arms do you have to adjust the length of the hoppos wishbone? I’m running into this issue now with the frame brackets being short almost 3 inches of touching.
@RJTickler
3 жыл бұрын
Depending on how long your trailing arms are the standard hoppos wishbone might not work.
Nice xD
👍🍻
Yo R.j.....do i have to take out the axle to install a bridge?. Or would it be just a whole lot easier if I did???....
@RJTickler
4 жыл бұрын
juan flores yeah it’s just a lot easier. If you have the room to get the bridge in and weld it then go for it. Most of the time there just isn’t enough room.
😩😍😍
Are wishbones required on 12 cylinders?
@mokma-nator3839
3 жыл бұрын
I run a Y bone with 12s... they say wish bones are for 14s or longer
Areu still in business where u located..are u in rock island Illinois?
@kobra_style
3 жыл бұрын
Hes in business still. Hes in Carlisle Iowa. If you need to reach him you can find him on Facebook look for Joe Thompson.
This 64 chevy impala are mine pop the glove box but if not mistake I can say that I'm sorry for my judgment but did you us a book call the sincere of hydraulics volume 1 if so can you order part 2 my pro is a install so rahfree brought me a kit in I need to install what's up address please I'll send you a box chevy
Yo you nead To flake your Roof ❤
You can barely see the wishbone
@RJTickler
4 жыл бұрын
raymudno hidalgo the point of the wishbone is to make your suspension better. Not see the wishbone.