Good info I love being able to swap springs with out having the take everything apart but unfortunately that's not always the case it sure makes swapping cylinders easy

Thankyou homie..ive got 1990 lincoln towncar I'm gonna do exactly what u just did plus switch out my Arms for 1 and half inch tuck...

thanks for videos. it helped me to fix supension physics for "lowriders comeback 2"

This is such a great video we appreciate you for the information

@LOWRIDERHYDRAULICS

2 жыл бұрын

No problem, glad to help.

Hi happy Thanksgiving Bro u are bless good tip thank u

Hey man can you make a video on how to know what links and where to adapt the chains at? Because I want to put some chains on mine but I don’t know where to put them nor how long they need to be can you please help?

Is your frame reinforced on that fleetwood I have a 77 coupe I wanna put switches on

Always bad ass homie.😷🇲🇽💪🏽👏🏼👍🏼🙏🏼LOVE YOUR VIDEOS. NO HOMO!🤔😆

really awesome video and channel. question. did your control arms come with the chains or did you modify them? really good idea. thanks for the video

@LOWRIDERHYDRAULICS

2 жыл бұрын

The control arms were custom made with the chain mounts and chain mounts were welded onto the frame.

Lots of great info. Insta subscribe. I have to replace the control arm shaft on my 90 this weekend and naturally have to remove the cylinder as well. I’m running full stack 5 tons, you think removing the ball joint nut connecting to the cylinder will give it enough clearance for it to come out? The lower should swing down with the spindle assembly for lots of room.

@LOWRIDERHYDRAULICS

2 жыл бұрын

Yes sir, Should have plenty of room.

I suggest after you cut the coil you round the sharp edges of what is left so it does not dig into the lower control arm.

Thanx for the videos!👍🏼 Did u put cut end on top or bottom??

@LOWRIDERHYDRAULICS

2 жыл бұрын

Bottom. Flat side is up where the cup slides in. Flat part of the cup meets the flat part of the spring.

@LOWRIDERHYDRAULICS

2 жыл бұрын

Bottom. Flat side is up where the cup slides in. Flat part of the cup meets the flat part of the spring.

@s0n_0f_cali73

2 жыл бұрын

Ok, jus making sure mines is correct! Thanx!✊🏼

Where did You buy them springs im trying to get the same ones, my car is too low too

@LOWRIDERHYDRAULICS

2 жыл бұрын

CCE hydraulics

Hey Russell I enjoy your videos I have a question I have a 1995 Cadillac Fleetwood thinking about getting juiced fbss Lay n play set up how much reinforcement do I need I’m in Arizona all the shops here are saying I don’t need to reinforce the rear at all

@LOWRIDERHYDRAULICS

Жыл бұрын

At a minimum I would always do the arches.

@tompark3092

Жыл бұрын

Good to know ty

I like to wrap a tow strap around the upper and lower control arm. It allows me to loosen and tighten pressure when taking apart and reinstalling. Good video my man thanks for sharing all your knowledge. It is appreciated!

@LOWRIDERHYDRAULICS

2 жыл бұрын

I could see how that would work. Thank you for the comment.

@JesusGarcia-ww6qo

2 жыл бұрын

How much would you charge to install lowrider hydrolics?

@LOWRIDERHYDRAULICS

2 жыл бұрын

I don’t actually do installs outside of my own cars and club members. Depending on your location, I could suggest an installer close to you.

@JesusGarcia-ww6qo

2 жыл бұрын

@@LOWRIDERHYDRAULICS oh well thanks I actually found one today actually.. what car club you in?

@LOWRIDERHYDRAULICS

2 жыл бұрын

@@JesusGarcia-ww6qo Affiliated CC Clarksville TN Chapter

Keep it up

@LOWRIDERHYDRAULICS

2 жыл бұрын

Try to post about every 2 days

Can you get good inches with the chains or will the car chip?

@LOWRIDERHYDRAULICS

2 жыл бұрын

Chains only act as a fail safe in case the ball joint breaks mainly. It can also help keep you from breaking ball joints. Doesn’t affect the hop much, but a lot of dancers use chains to give it that snap.

How long is the chain that you have from the bottom control arm to the frame

@LOWRIDERHYDRAULICS

Жыл бұрын

It’s different with each vehicle. I do it one link just before full lockout with no chain.

@freddierodriguez7741

Жыл бұрын

Do you have a video on how to put the chain and bracket on

does the flat side sit on the cup or in the pocket of the arm?

@LOWRIDERHYDRAULICS

Ай бұрын

Cup side.

@kilochris83

Ай бұрын

@@LOWRIDERHYDRAULICS Thanks man!

lol your son at the end is making it pretty clear that he’s rather be somewhere else 😂😂😂

@LOWRIDERHYDRAULICS

Жыл бұрын

Always

Safty glasses

U sure that's a 3/4 ton??

@LOWRIDERHYDRAULICS

2 жыл бұрын

3 1/4 ton not 3/4 ton

@LOWRIDERHYDRAULICS

2 жыл бұрын

I do now see why you ask that. We don’t use anything under 2 ton normally so I didn’t even catch that I was saying it that way lol.

@lonestarlows

2 жыл бұрын

@@LOWRIDERHYDRAULICS I knew you knew lol. Thats not a van spring 😎

Why is the chain short

Do you hav too switch the a arm if you change coils

@LOWRIDERHYDRAULICS

3 ай бұрын

No

@ragenastyboy8788

3 ай бұрын

Ok coo thank for responding