Hoppin Hydros Single Hop Kit
Thanks to Hoppin Hydros for sending this kit to test out, all products used are listed below
Parts used:
Rims: hoppinhydros.com/o-g-blvds-go...
Tires: hoppinhydros.com/low-profile-...
Single Hop Hydraulic Chassis Kit: hoppinhydros.com/single-hop-h...
Hoppin Hydros Website: hoppinhydros.com/
AMT 1967 Impala SS
Пікірлер: 96
This takes me waaayyy back to 96. I haven't one of those in years.
This might sound weird but I found this so satisfying, really nice review/tutorial! I salute you G 💯
@lowlowsandclothes9923
3 жыл бұрын
Thanks I’m glad you liked it💯
@LISVIZUALS
3 жыл бұрын
Fasho no problem!
I use to do them with fish string and the same lil motor with a clothes hanger I just love the video brought back memories when I was a kid
Hell ya that's clean tutorial was pretty good too might have to get one now..Thanks for sharing homie
@lowlowsandclothes9923
3 жыл бұрын
Thanks for the feedback homie I appreciate it💯🙏🏽
Fire videos homie💯🔥
@lowlowsandclothes9923
3 жыл бұрын
Thanks homie 💯
Whaaa...Doper than Dope..Lock the rear up n hop it haha..Easy explained tutorial..Thanx HomeBoy
@lowlowsandclothes9923
3 жыл бұрын
Thanks homie this ones only a front hop but there’s also a kit with both front and back, might be something to review in the future, thanks for the feedback homie💯
In 94-95 I use to put 4 motors in mine when I use to build those...I use to buy from the company their defect rims and parts in bulk...I would build 5 or six cars an sell them for 45$.
@lowlowsandclothes9923
Жыл бұрын
Nice haha
🔥🔥🔥🔥
Yessirr🔥🔥🔥🔥
@lowlowsandclothes9923
3 жыл бұрын
💯💯💪🏽
Shoot I used to use Bobby pins when I used to build them enjoyed the video champ
@lowlowsandclothes9923
3 жыл бұрын
Good times. Thanks for the comment💯
@hijodedios4550
3 жыл бұрын
@@lowlowsandclothes9923 your good g blessings boss
Can you post on how you did the battery
Got a few questions?! Can you run the string to both axles so both ends go up and down at about the same time? What is the lowest voltage you can run this on? I’m looking for more of an airbag effect on a curbside vs a hopper. Is it possible to put a small 3 way toggle or momentary switch on there to also make it look like it’s getting aired up or down? Can I replace the U-Bar with straight stock or would I be better off trimming and rebending it instead of I wanted to keep the full lift height lower?
I used to do this with a paper clip, that motor was in electric lollipops, we would run the paper clip through a straw and glue everything down. Lol same thing. Just touched a AA battery to make it hop
I just order from you place hopefully it come early
@lowlowsandclothes9923
3 жыл бұрын
I got in in 3 days so you should expect fast shipping
@mr.stomperr6408
3 жыл бұрын
@@lowlowsandclothes9923 my bad for not text back i got mine in a week because i got a lot of stuff
@lowlowsandclothes9923
3 жыл бұрын
Dope I think mine came in like 3 days because I’m in cali
can you make a video on how you set up the wire to the battery and the switch box?
@lowlowsandclothes9923
3 жыл бұрын
The kit should come with instructions
@Blu6demon
7 ай бұрын
Please make a video 🙏🏽🙏🏽
can you do a review on the the 3 wheel kit by hoppin hydros
@lowlowsandclothes9923
3 жыл бұрын
Review should come soon in the future
Are those plus tax?
Ay I’m a starter to dis stuff so can u tell me how you put the car on the base
@lowlowsandclothes9923
3 жыл бұрын
It has Velcro on the sifes
If i get w front and back kit from hoppin hydros, can i still install the kit AND keep the interior? Or does the interior have to go?
@lowlowsandclothes9923
3 жыл бұрын
Hmmm you might be able to fit the motor under the dash and one in the trunk
@kmart014
3 жыл бұрын
@@lowlowsandclothes9923 can i put both in the trunk?
@lowlowsandclothes9923
3 жыл бұрын
Probably youll just need some extra drill bits and a big body
@kmart014
3 жыл бұрын
@@lowlowsandclothes9923 yeah im do a 6-4 probably
Im about to do a car.
Where can you buy it is there a website or a place?
@lowlowsandclothes9923
3 жыл бұрын
Link is in the description below
How do u make it keep hoppin my gets stuck when I press the button
@lowlowsandclothes9923
3 жыл бұрын
Could be a few things, either not enough power, or the string is too long and needs to be shorter
Can you put the motor in the back so you can put the interior in?
@lowlowsandclothes9923
3 жыл бұрын
Yes actually, if you model had a interior bucket you can do that it is better explained in the instructions
@ernestcortes1392
3 жыл бұрын
If you look @ the chassis, it has holes for the strings throughout it for different positioning including the back (driver rear). If not, can always drill in, or melt in your own holes (if u don't have a drill small enough). What I have done before if I couldn't fit the motors in the trunk depending on the size of motors. I would cut out the back seat, leave the front seats in. After installing the motors I would see what parts of the back seat I would be able to build back in with motors in place. Or you can always tint/black out the rear window. ✊
@lowlowsandclothes9923
3 жыл бұрын
If you buy this kit there is instructions on how to place the motor in the back to use with a interior, although this will only work with a single motor but you might be able to get away with putting another one under the dash or behind the firewall
I’m so confused how u wired the switch box
@lowlowsandclothes9923
3 жыл бұрын
The kit comes with a wiring diagram
What scale are the wheels?
@lowlowsandclothes9923
2 жыл бұрын
1:25
Shii i got the same one and i out it on a regal but i added 2 more mottors on it
@lowlowsandclothes9923
3 жыл бұрын
Dope homie!
@clipsforyou3165
3 жыл бұрын
@@lowlowsandclothes9923 u can get the motors off stereos
What kinda battery you got?
@lowlowsandclothes9923
3 жыл бұрын
I’m using a rechargeable battery from a rc car, a small blue 7.4 volt battery. You can also use a 6 volt lead acid
@chavez.7078
3 жыл бұрын
@@lowlowsandclothes9923 alright thanks
Why won’t mine hop it just moves up?
@lowlowsandclothes9923
3 жыл бұрын
Okay so the string that you havw is either too long or your battery is to weak, make sure the string has very little slack and make sure your using a powerful enough battery
@chavez.7078
3 жыл бұрын
@@lowlowsandclothes9923 ok thank you 😊
Where can I buy this?
@lowlowsandclothes9923
2 жыл бұрын
Link should be in the description
Can u put it on a monte carlo ss??
@lowlowsandclothes9923
2 жыл бұрын
Yes!
What is slack I'm new in the hoppers scene so ye can someone pls explain
@lowlowsandclothes9923
Жыл бұрын
It’s the amount of extra line or how loose it is
@albertojimenez1539
Жыл бұрын
@@lowlowsandclothes9923 so if there's more line what is the difference?
@albertojimenez1539
Жыл бұрын
@@lowlowsandclothes9923 if there is extra line does it hop less more?
@lowlowsandclothes9923
Жыл бұрын
@@albertojimenez1539 if you have extra sometimes it wont go down and it’ll stay locked up
@albertojimenez1539
Жыл бұрын
@@lowlowsandclothes9923 oh ok thanks
Can you put it on any car model.
@lowlowsandclothes9923
2 жыл бұрын
Should fit under most models, mainly for impalas, g body’s, caddy’s and other big body cars
How much is it for kit 65 Chevy Impala
@lowlowsandclothes9923
3 жыл бұрын
It’s a universal fit, it fits under most late model cars. This single hop kit runs at $16.75 link in the description below if your interested
How do u get three wires I only get 2
@lowlowsandclothes9923
3 жыл бұрын
You cut one side to add the button, it should be in your instructions
@bryanmartinez-ou9cy
3 жыл бұрын
@@lowlowsandclothes9923 dam I threw mine away but I got some coming this week I will let u know if I need help okay
@lowlowsandclothes9923
3 жыл бұрын
@@bryanmartinez-ou9cy dm me at los_traviesos_sac if you need help
How much was it in total plus shipping and tax
@jayypeezy36
2 ай бұрын
Just bought 1 other day the front and back hop 32$ total with shipping took 2days to get g
I need help with mine won’t hop it will hop once then stop
@syxxpoppin8830
4 ай бұрын
Mine was the same way sometimes the string 🧵 gets tangled up.. mostly when it hops one and then nothing else.its because it is not enough weight to bring it back down... People mostly use fishing weights to add a few ounces to the chassis.
@Haterhurter
4 ай бұрын
@@syxxpoppin8830 okay thanks I got it fixing now I plan on building more
@jayypeezy36
2 ай бұрын
@@syxxpoppin8830u ever figured it out fam im having same prob
Mine lifts but doesn’t hop any ideas
@lowlowsandclothes9923
3 жыл бұрын
Either 2 things, your string is too long or not enough power
@Randomuser23214
3 жыл бұрын
I have the same problem
@Haterhurter
6 ай бұрын
@@lowlowsandclothes9923yea I need help
What’s your Instagram I need help on wiring the switch box
@lowlowsandclothes9923
3 жыл бұрын
@los_traviesos_sac
@Randomuser23214
3 жыл бұрын
@@lowlowsandclothes9923 I just messaged you on ig my ig is kingstonscustomdiecast
@jayypeezy36
2 ай бұрын
@@Randomuser23214u ever get help bro?
@jayypeezy36
2 ай бұрын
. Did u ever figure out g i need help man
🔥🔥🔥🔥
@lowlowsandclothes9923
3 жыл бұрын
Thanks homie 💯