My local machine shop did my hone & I used Total Seal 46770ST-6 AP rings in my 12 Mustang 3.7 cyclone with Manley rods and pistons. Versus the stock ford piston rings I have 50-75% less blow by. Seriously even at 7500+ rpm minimal. I would go from changing my catch can once a month to every other month. My little 3.7 cyclone made 324 whp through a 6r80, Circle d 3c & 355 gears. I have tons of dyno print outs. Best with stock pistons and rings was 316/306 to the wheel. Manley pistons, Totalseal rings 324/309. Both pistons were 10.5-1 Im a believer in total seal piston rings. Love the Info I honestly purchased my rings because of the info from these videos.

@TotalSeal

8 ай бұрын

Thank you for sharing your experience!

First,- I have watched and paid attn to almost all of total Seal schooling, - BUT with that in mind EVERY machine shop I have ever asked if they have said equipment to do the above..I get the deer in the headlights look. So my advice Toatl Seal IS,- please give us a list of shops that can do this performance hone job!!!!!!

@TotalSeal

8 ай бұрын

Thanks for the advice. We are working on it.

@uhih6717823

8 ай бұрын

@@TotalSeal I Have several sets of Harley EVO Nodular iron Axtell cylinders I need to do here, we need to talk about rings for these very HIPO engines, and where to get them sized and honed at. Thanx

@TotalSeal

8 ай бұрын

@@uhih6717823please contact our tech support team at 623-587-7400

Schools out😂. Thanks for keeping the rest of us from continuing to make mistakes.

@TotalSeal

8 ай бұрын

Any time!

Great video! From a technical standpoint, you’re doing a wonderful job of explaining the purpose of a proper before I’m home size with respect to Broll search patterns and even including coated services. Right tool for the right job the back up everything that you talk about… Great work

@TotalSeal

4 ай бұрын

Much appreciated!

Great info! I thought the video would be about what surface finish would ruin your engine, but didn’t see anything about that.

@TotalSeal

8 ай бұрын

Thanks. It’s more about the tools to see what surface was actually created. We routinely see that the same honing process doesn’t always create the same surface finish result…

That was like watching a 3am infomercial , i was waiting for the 'free set of eversharp steak knives' to ve offered up ! 😂

@TotalSeal

8 ай бұрын

The Ginsu knives look awesome under the microscope, LOL.

@craig8187

8 ай бұрын

@@TotalSeal 🤣🤣👍

More aluminum honing tips!!! Audi 4.2!!

This is the explanation I’ve been waiting on… Would still like to see a scale cross section or how about a scanning electron microscope view.

@TotalSeal

8 ай бұрын

Stay tuned…

Props for working Devil's Peak into a cylinder bore surface video

@TotalSeal

8 ай бұрын

LOL!

Thanks again for another great class room segment! I wonder how the USB microscope and profilometer might show the difference between a properly prepared and cleaned bore vs one just wiped down with the red shop towel (seemingly the standard). And what exactly is a lint free cloth... ? Thanks as always😎

@TotalSeal

8 ай бұрын

Thanks and that’s a great question! The USB microscope would show you any lent left behind!

@ejgrant5191

8 ай бұрын

Lint free cloth? We use newspaper or the whitish masking paper with ATF as a bore cleaner after I was taught this by a noted engine builder...Process starts off with HOT! water & Dawn Dishwashing soap....Spray WD40 on machined finishes before drying and after drying then the ATF in the cylinder bores wiped with the paper until it comes out clean with no dark residue.

@jeffbonifield8981

8 ай бұрын

@@ejgrant5191 interesting. Thanks. I have tried to find the elusive lint free definition for a while now. It seems like a simple question but it is not. That is a great process so thanks for sharing. I have been harassing Lake with this question for a while now. 😎

What microscope are you using?

Can you make a video with the experts, on which stone grid, speed produce the best results, I understand it depends of engine sleeve/cylinder material, type of ring, ring thickness and ring coating.

@TotalSeal

8 ай бұрын

Here's the link to part 1 of a three part series that gets into all of those details: kzread.info/dash/bejne/X2ybk9KYqajAgLQ.htmlsi=1B6wL1NsWgqjQf4m

@CJ5EVOLUTION

8 ай бұрын

@@TotalSeal noted, I'm in the process to watch them all, thanks

How much if any does cylinder wall finish affect near wall detonation characteristics by the amount of oil dilution to fuel condensed at cylinder wall especially in high compression engines will huge swirl from modern cylinder head port designs ?

@TotalSeal

8 ай бұрын

It doesn’t affect detonation, but the oil chemistry can affect detonation.

how do you know if a machine shop is at this level

@TotalSeal

8 ай бұрын

You have to ask them if they have a profilometer. If they don’t, they are not.

Next level , the motor im playing with , the tolerances are so tight it dont have bearings , rod or crank bearings ..my dial bore gauge goes down to .0005 , the spec sheet measures in .0001 , max. Wear limit 3.2697 " or 83.051 mm on stock size piston ??? Kohler command v-twin 26.5 hp efi model # 749-3043 ..i need it bored , cylinder taper and mic'd ..

dude is a bobble head😂

@TotalSeal

8 ай бұрын

LOL, too much caffeine!

Book recommendations on this topic?

@TotalSeal

8 ай бұрын

www.amazon.com/Surface-Texture-Answer-Book/dp/1736846825/ref=asc_df_1736846825/?tag=hyprod-20&linkCode=df0&hvadid=509037941945&hvpos=&hvnetw=g&hvrand=9805291192016636503&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1021064&hvtargid=pla-1322816203165&psc=1

Since the oem's pioneered a new high pressure anode/cathode moly adherence spray procedure on Oil Rings and began SKIPPING the exterior Oil Ring Honing(cut corners/to save money)..... ALL Cylinder Bore Finishes had to get "rougher' so as the oil rings could basically "grind" themselves in upon fire-up... far moreso than ever before. Frigg'in JOKE.... I long for the days when we still had SSOU50 Federal Mogul Oil Rings..... WAY BETTER than any of this Hastings GARBAGE !

Why is this a tight shot of 2 guys stuffed together close but then yelling at each other? Before you lecture me about the audio challenges I am aware, and I would suggest you would have been better served to solve them. Plus the fake hype/excitement is just weird.

@bobirving6052

8 ай бұрын

@jameshisself9324 It’s not fake 😆 Watch more videos. These guys are really excited about this stuff and also use too much caffeine or something.

@jameshisself9324

8 ай бұрын

@@bobirving6052 Ahh, so it's their 'brand'. Got it.

@EldonJohansen

4 ай бұрын

i don't think its caffeine... @@bobirving6052

You guys ramble on and on about nothing substantial or terribly pertinent to the average Joe. Too much yappin' and not enough information.

Why do these guys speak like they're on uppers?